**Please note this idea was migrated to the Product Feedback Forum from older submission areas** Designers cannot save formulas for shared use. This is problematic in two scenarios: 1. End users (our customers’ customers) are Designers 2. Data models are shared across multiple tenants (with row level security) Without this the customer is forced to either manage hundreds of separate data models, which is not sustainable, or to remove all ability to save formulas, which is not acceptable for users. The “Shared Formulas” feature should allow for permissioning; something similar to “limit sharing to users’ own groups” would work. ... View more

Currently when scheduling builds to run in intervals, you can choose for the builds to run once every X days, OR X hours, OR X minutes. https://docs.sisense.com/main/SisenseLinux/scheduling-builds.htm. It would be beneficial to: 1. Use Hours AND minutes so we can prevent builds scheduled for every one hour from colliding with another build on hourly (even if multiple hours) interval i.e. schedule one for every 1 hour, and one for every 4 hours and on the 4th hour they collide and prevent successful full build. 2. Allow specific scheduled time and multiple intervals i.e. start @ 7AM and repeat every hour for 6 hours, or start at x hr and repeat every x minutes.   ... View more

I have a data model with lots of tables (more than 30). That makes the UI painfully slow, e.g. when editing relationships. I think the reason is that it’s calculating where to place them on the screen. I’d like to request an alternative, crude interface that doesn’t slow down for lots of tables. Or make it work for lots of tables – e.g. do the positioning calculations when first opening, but not each time I resize or click on something. ... View more

It’d be nice to save the layout with the .smodel file. That way, I can group related tables together. Maybe also allow comments/colours/tags to show up on the UI. E.g. I could put payroll-database dimensions on one side in blue, operational-database dimensions in orange on the other, and facts in the middle. ... View more

Current behavior of the Simply Ask feature doesn't support automatic saving of the modified NLQ model to the "*.dash" file. So you loose your development work after exporting the dashboard with already enabled and tuned "Simply Ask" to a "*.dash" file. After importing this dashboard back to Sisense the feature is automatically disabled. Also if a developer will enable it manually it starts running based on the "By Default" NLQ model. This forces to redo all the work on the model back again which is time consuming and not efficient. We expect Sisense to consider in the future the development work on making this more convenient for a BI engineer. If a "Simply Ask" feature will be automatically enabled on an imported dashboard with a corrected model, it would be beneficial for dashboard deploy automation and will reduce unneeded additional manual work on setting up this feature again and again for different working environments for the same dashboard. ... View more

Because a non-trivial amount of the population is colorblind, it's a best practice to never rely solely on color when indicating behavior or status of a UI element. The filter-pane buttons are by default, I think, green for positive selection, red for exclusion, and grey for unselected. It would be better if there was also a small icon in the button that would indicate checkmark if positive, "X" if negative, and blank if unselected. Or perhaps, if Unselected (red), show a thin "X" over the whole body of the button. Thank you. ... View more

Every day we process our elasticubes and they always process in the same sequence.  Users are able to create dashboards that have widgets from different elasticubes.  However when they select to send the dashboard by email on "Every Elasticube Update" this sends after the first of the elasticubes has processed, rather than waiting until all of them have updated.  This means users are emailed dashboards that have some data correct, and some that is old. I think the solution would be an option to send after all of the elasticubes in the dashboard have updated, or to select a specific one, if the elasticubes generally build in a particular order. It would be good if this could be considered for enhancement as users wouldn't want to receive partially correct dashboards in this situation. Thanks, James ... View more

We are a multi-tenant software provider and we embed and white label Sisense.  In our setup, we have 2 models.  Model 1 is used by Engineering to create our pre-built dashboards, where we share these with specific groups we've set up so that all of our customers see our pre-built "out of the box" dashboards The second model is what we expose to our Premium users so that they can create their own custom dashboards.   There are times when our customers will create a new, custom dashboard with the second model.  These users sometimes share their dashboard very broadly.  When this happens, there are certain users that wish to remove themselves from the share.  Perhaps they don't have row-level security to see anything.  Perhaps they have changed roles or simply do not use that dashboard. Note that we do not want to allow customers to remove themselves from our pre-built shared dashboards, as this could cause support confusion as to why our analytics solution is enabled but a user doesn't see "all of the dashboards".   With the above noted, we would like a configurable means to show/hide a "leave shared dashboard" dashboard option, based on the model with which a dashboard is associated.  This will ensure that users cannot remove themselves from our pre-built dashboards (we would hide on our model) yet allow them to remove themselves from custom dashboards that were shared with them (we would show on model 2 for self-authoring) When a user leaves a shared dashboard, there should also be configuration options to alert the owner of the dashboard via email.  This email should be capable of white labeling.  It should include dashboard name, who left, and when.  Should there be links to the dashboard in the email, there must be a way to disable hyperlinks in the email. ... View more

Currently you only provide a direct link to a dashboard.  Allow the ability to have the ID of the dashboard. That way customers embedding the dashboard into their main app can load it natively into their app instead of directing the user directly to the Sisense instance. ... View more

There are many scenarios where a model contains data for many distinct groups, such as customers, and you want viewers to only have access to the data that pertains to their specific customer. This is easily implemented with row level security, when there is a data column that uniquely identifies each customer. But what if you have a requirement that certain types of viewers should see all columns of data per row, while others should not have access to certain columns? Here is an approach that can be implemented right out of the box in Sisense. The one prerequisite is that any table that contains sensitive data must have a column that uniquely identifies every row, i.e. a primary key column. For every table that contains sensitive data in certain columns, create a new table that contains the original table's primary key column, a binary "switch" column with a name like [Access Allowed] and a column for each of the sensitive columns. Remove the sensitive columns from the original table. Modify the import query to load only the non-sensitive columns in the original table. Modify the import query to load the new table with the primary key and sensitive columns of the original table twice, once with [Access Allowed] set to 1 and the second time with 0 and blank (or null) for all the sensitive columns. Associate the new table to the original table by primary key column Create a dimension table for secure access with the column [Access Allowed]. One row with value 0, one row with value 1. Associate the dimension table with the sensitive data table by the [Access Allowed] column. Set up a data security rule on this column, assigning the secure user group to value 1 and the general group to value 0 If there is a hierarchy greater than two levels of column-level data security, this model can be extended to create additional one-to-one related tables to the original table. ... View more

After using the following property in customize JTD widget script for Pivot widget, JTD is enabled for all rows.  drillToDashboardNavigateTypePivot: 1 It would be great if we have an option of enabling JTD for specific rows.  For example, we are having 4 rows and 2 value columns in the pivot but want to have JTD linked to only "row2" and have that "row2" data passing to JTD as filter (as shown in the picture). NOTE: Customize JTD widget script referenced from Official Sisense documentation: https://www.sisense.com/marketplace/jump-to-dashboard/  ... View more

There are some dashboards where we don't want people messing with the filters.  Or where filters aren't needed to be changed, and we want the maximum "real estate" available for the body of the dashboard. I know you can hide the left- and right-hand panes with script, but this really should be an option exposed in the dashboard designer UI, as a setting for that dashboard. Example: Filter Pane:  Show [default]; Collapsed [but user can expand]; Hidden [user can't expand it]   ... View more

When Pivot or Table widgets, the options for formatting a datetime column allow showing the date OR the time, with no option to show both together (e.g. if format was "dd/MM/yyyy HH:mm:ss" then we could get "23/10/2022 17:05:21").   ... View more

The in app Look and Feel UI theme editor is an improvement to the CSS editing of the past, but it has removed some capabilities that were possible in the past. Items that should be added to the theme editor Primary Button Outline color Cancel Button Outline color Primary button hover state text color Cancel button hover state text color ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** For example, we have a system event type that indicates that a restaurant has modified their online ordering hours. Our clients use the indicator for that event type and set it to alert when it gets above 0, as stores aren’t supposed to modify their online ordering hours without owner consent. The problem is that the owner has several stores. They receive an alert when the first store changes their online ordering hours (# of events > 0), but not when a second store does it. The alert is sent at 1 but not 2. The workaround for now is to configure multiple Pulse Alerts, one per store, but that’s only feasible when there aren’t many stores. We have a franchise with over 300 stores! Also, if a store then changes their online hours back, the owner isn’t informed of that either. Can you please add a feature request for an option on the Pulse Alerts to notify on any increase to the value once it’s exceeded the threshold, so the user would receive an alert at 1 and additional alerts at 2, 3, etc.? This would have to be optional and off by default, as you wouldn’t want that to be activated for something that tracked a value that increases often, but the core use case here is for exceptional activity tracking, so the values should rarely increase. ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** User parameters must be set and cannot be used for dynamic customizations. When setting up data models, these parameters cannot be included as part of a filter in the underlying query. We would like a way to reference a global or system variable that includes the username of the currently logged in user. ... View more

Currently sorting of dimensions/categories/series is by Ascending and Descending only.  There are times when such data points need to be sorted in a non alphanumeric manner.  For example, Critical, High, Medium, Low is the desired sort, but this appears as Critical, High, Low, Medium or Medium, Low, High, Critical which looks sub optimal to the user.  A workaround is to add a number prefix via modelling, again this is less than ideal for the user, as is a script to update the displayed values to remove the prefix.  As is possible with other BI Tools, there should be an option for the Designer to configure the sort.  There are various community plugins and scripts that do this on an explicit per widget basis, however these are prone to fail/break and aren't guaranteed or supported through version upgrades.  This should be a part of core application functionality. ... View more

My team was adding scripts to widgets to add attributes to the embedded widget and noticed an opportunity to expand what metadata we can use in the scripts. Currently, we're using the widget description (`desc` field) to set a testid attribute, but by default that description is viewable in the embedded widget.  I'd love the ability for designers to add key/value pairs to the Widget class metadata that are accessible in the widget script. widget.on('domready', function(w) { const { oid, customMetadata } = w; // customMetadata is the new (optional) property on a Widget const testId = customMetadata['testId']; // a key/value pair added by designer const selectorString = `[widgetid='${oid}']`; const widgetElement = $(selectorString); widgetElement[0].setAttribute('testid', testId); });   ... View more

The Pivot table Excel download behaviour was recently changed. Previously, merged cells from the pivot table on the dashboard view would persist in a downloaded Excel file. Now, rows are not merged and are simply duplicated (as with the csv download). While there are some upsides to this, this is a change our users and customers have reacted negatively to, asking us to revert the change, which of course we are unable to do. We would like the option back for a download which maintains pivot table cell merging, replicating the way these appear in the dashboard.  ... View more