Major process changes were made on a specific date in May. We would like to be able to add a phase change line in graph to represent an event change, so we can clearly see before and after comparison. ... View more

It would be nice to have an officially supported Events endpoint, that lists all the alerts / pulses / notifications that were sent out when an event was triggered. This allows users to create dashboards giving a quick overview of where problems occur. There already is an /events endpoint, but it is not officially supported and not listed in the APIs, so we were only able to find out about it by creating a support ticket. ... View more

We would like to configure multiple data security rules on a live data source table. With the available APIs there is a constraint to set one rule at a time. Having an API that accepts a collection of multiple rules is desired for our use case since we have more that 18,000 rules to be set. ... View more

System emails like shared dashboards or report manager include links where the URL resolves to the Sisense instance. For white labeling / embedded products this doesn't work. If we had access to more variables when customizing templates we would have greater flexibility in designing workflows. Specifically if we had access to the <id> of the dashboard and instance & group level parameters this would make the messages far more customizable and useful in a variety of scenarios. Some of the other metadata as variables would also be very helpful and make emails more valuable. ... View more

Hi, I want to show in my dashboard the values of the last 12 months period. As I do not want to select the month every month manually, it should be dynamically taking always the last 12 months. So far I am using the advanced settings in the filter: { "last": { "count": 12, "offset": 0 }, "custom": true } The issue is, that my available data is not always up to date. Therefore, I want to select the last 12 months counting the offset back 2 months from the selected month in the filter. As far as I understood is that the offset counts back from the current date disregarding the filters settings. I would need something like thi: { "last": { "count": 12, "offset": 2 (counting from date selected in "sale date" filter) }, "custom": true } ... View more

For now, dimensions are displayed to the dashboard designer in the alphabetic orders of the tables / columns names. I would like the datamodel designer to have the control over sorting / grouping the dimensions. Ex : 3 tables Address Number Street City City Zip code Country Country Currently : the list of dimension will contain 3 groups: Address / City / Country The columns in each will also be sorted by alphabetic order.  Expected : the datamodel designer will choose how he want these columns to be displayed, for instance, under one single group : Address Number Street Zip code City Country     ... View more

Currently, when using the Usage Analytics EC you do not have the ability to audit for everything you need when it comes to what your users are downloading.  Right now all we can audit for is PDF, Image, and CSV.  I would like the ability to be able to audit for Excel, PPT and any download options that are made available. Management wants to know who is downloading what, but right now we can only give data for some items and only for 30 days.   I would like to be able to have a larger selection of items to audit that utilize a customizable timeframe for how long to retain history for a select data point. If we are to audit for a pattern of downloads 30 days does not meet our needs.  Currently, if we want to audit for more than 30 days, we would need to get the data in a format that can then be loaded into an external DB that can then be reincorporated back into an EC for reporting.  This seems to be a waste of time and resources when this should be able to happen in the source system. ... View more

Sisense ElastiCubes are the biggest consumer of our snowflake credits because we have to build our cubes every 30 mins to keep data fresh in Sisense. It would be useful to have time of the day level control on scheduling the build. Like Build daily at an interval only between the hours of x and y or other cron based scheduling. cron scheduling would be great since it allows us to set build windows, not build as frequently on weekends, etc. This would immensely help with cost saving. How quickly is it possible to have such a feature? ... View more

Hi Team,  When we import a lot of files (CSV for example), we have to select each file one by one. Could it be possible to select a lot of files with one click ?  Best    ... View more

NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Hi, I have issue with setting two date dimensions in dashboard. The goal I want to achieve is to have a history of records, which are also have it's own date dimension. You can download model and dashboard. I would like to have difference in growth ower selected period for defined dates. For example 2 days ago I sold a car for 1000, and yesterday the proce have changed to 1500. The sale date is for today. So the growth over 2 days is 1500, and for 1 day 500. Additionally i would like to compare those values to previous year, and go back with both date dimensions. Tricky part is also, that if there is not sale for this year, PastYear() wont count prior year. I tried to play around with filtered measure plugin, however it doesn't give me exactly what i want. Do you have any suggestions how can I approach such data and 2 date dimensions? Thanks 🙂 ... View more

Support indicates that starting with version 1.11.25, a toggle was introduced to enable the sending of empty Excel files when using the Report Manager.  Please implement the same feature with other file types.  At the moment I am using CSV. ... View more

Hello, On PDFs previews there is different mechanism of showing dashboard. Basically there is now possibility to register any events such 'widgetbeforequery'. Which can lead to incorrect views. The idea here is simple, to add possibility to register and run events on PDF previews. ... View more

Jump To Dashboard add-in It lists dashboards with the _drill_ prefix. It lists only dashboards using the same datasource. I have a drill-down dashboard that uses two datasources: one that matches my parent dashboard, and one that shows more granular information. I'd like this drill-down dashboard to appear on the JTD list. I think the JTD list should show any dashboards that share at least one datasource with the parent. ... View more

There is no option to modify table columns width in notebook results. This means that if I query a dataset of accessed URLs, where the end of the line matters most I cannot see anything beyond the domain name.  Optional workarounds are hovering row by row or exporting all results to CSV. Both are cumbersome. Modifying columns width seems to be a common notebook functionality in similar solutions, so it would be nice if Sisense could support this as well.  ... View more

In my datamodel, I want to delete 10 tables with names ending with "MySpecialSuffix". So, I go to datamodel list view and search for "MySpecialSuffix". I click delete on the first table. But then it loses my filter. So I have to re-type my filter for each table I want to delete. ... View more

The Data Security tab's group/user assignment window currently has a max search limit of 20 results.   The "results" search limit should be configurable because we have approx. 50 groups that need to be assigned, & it is very difficult to find/assign/manage all of the groups when the search window does not return all of the appropriate results. ... View more

See here: https://community.sisense.com/t5/technical-troubleshooting/refresh-schema-error/m-p/23594#M195 Refresh Schema fails when you have tables from two different schemas. ... View more

When we send more than one Combined Excel Report while using a dashboard having different filters on it. Names of those combined Excel sheet we get from them is same as they were using same dashboard for creating a report, which is difficult to identify when downloaded simultaneously. Can we base the name of excel sheet on Report Name itself rather than dashboard name as it will be more convenient. Thanks, Animesh Gupta ... View more