It takes 5-10 seconds to load the Manage Cases page in the Support Portal. It takes even longer to open a specific case. A case can only be opened in the same window as the Manage Cases page. To go to another case requires going back to the Manage Cases page first and waiting for it to load again.  Please allow cases to be open in a new tab so that the Manage Cases page doesn't have to be reloaded so frequently, and many cases can be open and loaded concurrently rather than one at a time. Thanks for considering. ... View more

Creating security rules within the Data Security menu for Elasticubes only allows you to assign users access to values to that are already in your data. If I am creating a rules for user visibility of e.g. individual 'store references' and a new store with reference '1414' is added, I can't create a rule for store 1414 unless it is already in my data. Could there be an option to manually specify the value, rather than having to select a pre-existing value? (I am aware this possible to add via the REST API, but this is a bit fiddly for frequent small edits). ... View more

When building dashboards, a common frustration is the lack of ability to multi-select widgets and perform mass actions, such as moving a group of widgets all-together at the same time, or deleting multiple widgets at once. Currently, to do either of those actions, you must do it one-at-a-time on each widget individually. This is tedious and time-consuming if you have many widgets you need to move or delete. It would be nice if there was some way to select multiple widgets at once and perform some kind of mass action on them, like click-and-drag to reposition, or to select "delete" and delete all selected widgets at once. I'm not sure what the best way to do this would be. Perhaps a toggle at the top of the dashboard that allows you to click a checkbox next to each widget. Similar functionality already exists for the main dashboard list, on the left-hand sidebar...a toggle at the top will cause checkboxes to display next to each dashboard (or dashboard folder). Checking any of the boxes will cause additional options to display at the bottom of the sidebar, allowing you to export or delete the selected dashboards. Alternatively, if there were a way to "group" widgets into a container of some sort, then you could perform an action on that container which would apply to all widgets within it. For example, if you had a container, and then three widgets inside, you could select the container and move it, which would move the widgets as well, or you could select "delete" which would delete the container and everything inside it. ... View more

I've been trailing the Report Manager add-on and was disappointed to see that the 'Event Based' option for triggering reports did not allow for Pulse Alerts to be used as an Event. It seems the current workaround is to use a tool like Zapier (so the pulse goes out to Zapier via webhook, which then creates the Event and goes back into Sisense, causing the report to be sent. This seems convoluted and I would have thought being able to directly integrate Pulses to trigger Reports seems like a natural fit. ... View more

When a Sisense server's IP address changes, you have to reinstall Sisense. I want a script or button that changes all the relevant settings. We need it because we're planning changes to our network. There are other reasons that an IP address might need to change, e.g. I might restore from a system image backup to a different location, or I might start a new server and, after testing, want to redirect my old server's IP address to it. We'll do it by reinstalling, but that feels like more work than it should be. ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

Add the ability to programmatically export a Widget with specific filters and/or to export it as a certain user using the /dashboard/{id}/widgets{id}/ endpoint. User Story#1 As an admin I want to make api calls to the widget pdf export endpoint and include userid and custom filters so that I can download an export on behalf of another user in the system and specify the filters  Acceptance Criteria I can pass 2 properties to the export endpoint: User Id and filters Both parameters are optional and can be used separately from each other If a user Id parameter is provided, the Widget is exported on behalf of the provided user including the current filters applied and data security rules. If a custom filters parameter is provided, the Widget is exported with the custom filters. There is no merge between the existing Widget filters and the custom filters parameter.  The is an option to provide an empty custom filters parameter, in this case, no filters are applied to the dashboard.  User story #2 As a user (not admin) I want to make api calls to the Widget pdf export endpoint and include custom filters so that I can download an export with custom filters  Acceptance Criteria I can pass a custom filters parameter to the export to the Export endpoint The custom filters parameter is a jaql query that will replace the current dashboard filters The custom filters will respect my data security  I can provide an empty custom filters parameter that will remove all filters from the report. ... View more

Upon receiving the warning "Maximum number of series (50) exceeded", the warning does not reappear with a widget, dashboard, or page refresh. Instead, a filter change is required in order to trigger it again. IMO the warning should persist with refreshes and be visible every time due to the impact of the limitation being exceed - data is literally missing from the widget and the widget does not reflect the data set expected by the user.  To that end of being clear about the impact of having more series than the limitation allows, the warning would be best reworded to indicate that impact and avoid users making decisions on an uncontrolled subset of data. For example, "Results limited to maximum number of series (50)..." or "Data limited..." This limitation should also be documented in Sisense documentation, but is not currently. ... View more

This is a request to enhance this feature in community thread of the same title. This is useful because it allows users to see all the available dimension for a particular list of filters even if there are no facts for it. I understand that we can also use this community thread; however, this is only limited to 1 dimension. However, right now, it does not work when [Columns] field are added into pivot table. We would like to add a date/day [Columns]. Ideally for us, the left outer join should only be by the [Row] and allow data to be broken into [Columns]. ... View more

The email schedules have a limitation when the file used in attachment is large in size. Most email servers have a 25mb max limit.  It would be really helpful, if there was an option to include a downloadable link in the email. When a user schedules an email, with the link option, the attachment is downloaded to a temporary path and the link to that path is provided in the email. Clicking on the link should download the file from the temporary path which can be an s3 bucket or from some server. We can keep a retention policy of few days for the files. ... View more

This is an "add on" request to this product request. Our customers need to be able to filter on datetime columns using a combination of both the date and the time. I'd like to see this added as a capability of filtering. For example, I'd like to filter records from "0800 yesterday to 0800 today". Or "0800 on Monday to 1700 Wednesday". Or "0800 4/1/23 to 0800 4/5/23". ... View more

Currently, we are using below Rest API to generate a daily report to know the users, groups, roles etc.  /api/v1/users/get We need an additional field (last_password_change_date) for reporting that would tell us when the user changed the password. ... View more

Our customers want to use the same data field twice within a filter. For example, within the field primary impression we want to include "seizure" and exclude the value "pyschiatric/behavioral problem". Is this kind of functionality on the roadmap, or can we have it added? ... View more

Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

Hi, Currently in the filters, we are unable to directly filter a comma separated list of entries. The options available are individually selecting the members, however that can get tedious if the list of entries we need to filter are large. For example, filter more than 100 entries. The other option is using the custom option in the filter. However, that too requires JAQL code which might be difficult for non technical users.  It can be useful to have the option to directly copy paste a comma separated list of entries in the filters instead of multiselecting or using the custom JAQL option.   ... View more

Simply put, the ability to have a button within the UI for when new users are created within a particular data group (or similar category) to replicate permissions, DS, dashboard sharing, pulse, data model shares, etc.  Even simpler, the ability to have a column within User Mgmt. to show which dashboards are shared with which user.  ... View more

Currently, if we export the pivot as an excel/csv, there is no indication of the date range it was run for in the output file. It will be really helpful to have control on the exported output in excel or csv, such that we can include the date range of the result or other filters applied in the output. ... View more

The list of our shared formulas can grow to be quite long.  We would like the ability to search within formulas, just as you can for attributes. ... View more

Would like an easy way to transfer ownership of objects to someone else.  Or for a super-user admin to be able to "take ownership" of a data model or dashboard.  Will make it easier to deal with when someone leaves the company and they owned things in Sisense. ... View more