I recently posted a query on sisense forum to increase the offset size of a pie in a piechart. I got a response how it can be done at a widget level, but there is no feature in sisense to apply this change at global level for all pie charts in every dashboard. In fact, there should be a global space where any change for any widget could be applied to all such widgets in every dashboard. ... View more

Similar to widow-orphan control of Paragraph page breaks in MS Word... it would be nice to have this in pivot tables too. That is, let's say the existing rows/subtotals in a pivot table take up 20 out of the "rows per page" value of 25.  If the next sub-section to display is going to take 3 rows, great, show that section.  But if the next sub-section is going to show 10 items, it means the subsection/subtotal will be split across two pages.  This is hard to remembe/digest/use when interacting with the dashboard.  With widow-orphan control, it would do a page break "early" before showing that next subsection of 10 items. ... View more

In the left-hand sidebar where the list of Dashboards is shown, it would be nice if there was a visual indicator of whether a Dashboard that you own is being shared with anyone else. Currently, the only way to determine this is to click the kebab icon (⋮) next to the dashboard name and see if it says "Republish" (indicating the dashboard is currently being shared) or "Share" (indicating the dashboard is not currently being shared with anyone). However, if you are the owner of MANY dashboards, some of which are shared and some of which are not, then it can be very tedious to check this one-by-one. If you hover over a dashboard in the list, a pop-up will display with additional information, one of which is a "Last Published" date/time. However, this doesn't really help. First, it only appears on mouseover, so it doesn't solve the problem of this information being tedious to check/verify (since you still have to check each dashboard one-by-one). Second, the "Last Published" displays if the dashboard has EVER been shared, even if it's not currently being shared with anybody. For example, if I shared a dashboard with Bob, but then later removed him from the share list, then the dashboard is only visible to me and no one else, but the pop-up will still show the last time I published it to Bob (even though he can't see it anymore). There's also a visual indicator, to the left of the dashboards, in the form of an icon that changes depending on the status of the dashboard in question. Unfortunately, this icon only shows the ownership status of the dashboard, not it's share status. That is: it helps you identify at-a-glance (A) which dashboards in a list are ones you own, vs (B) dashboards that someone else owns and has shared with you. However, for the dashboards that fall into (A), there's no indicator as to whether you've shared it or if they are only visible to you.  Perhaps a different icon could be used to indicate each state. Another nice-to-have: for dashboards that fall into (B), i.e. dashboards that someone else owns and has shared with you, perhaps there could be different icons depending on the way it was shared with you. That is: whether the person shared it with you specifically vs shared it with a group that you're part of. Essentially, the icon should indicate all the possible states that a dashboard can be in: Dashboards you own that are not shared with anybody (i.e. only you can see it) Dashboards you own that have been shared with others Dashboards you do NOT own that have been shared with you Dashboards shared with you specifically Dashboards shared with a group you're in ... View more

the display format of the cube build time is shown as "Nov 8, 2023 2:00:01 AM" We should have option to format it to "11/08/2023 02:00 ' i.e. MM/dd/yyyy HH:mm:ss' ... View more

We would like the ability to modify attribute names and shared formula names without breaking dashboards or requiring partner plugins.   ... View more

We create a basic set of pre-built dashboards that we publish, where business users can view but not modify.  We also have two-tiers of analytics offering for business users (standard and premium).  On our common, pre-built dashboards, which are available to both standard and premium, we would like the ability to expose Simply Ask to only those users of premium (hiding it from those who are standard).   While this may be achievable via a 2-model, 2-dashbaord set approach, we desire to manage a single set of dashbaords and model to simplify deployment overhead and maintenance. ... View more

We disabled the new Simply Ask option in the Sisense configuration but it's still showing as a disabled option when you click a dashboard's context menu. We submitted this as a defect but were told that it's "by design". It's by design to show an option that's been disabled? We don't want users to request the option be turned on, as the hover text suggests. ... View more

Would you consider allowing the retrieval of files from the nodes with the file management so that end-users can retrieve logs with having ssh access. ... View more

we have "label" field that have multiple values per entity and would like to be able to use the same field for both column and row in the pivot table. We will use different filter on column vs row so different values will be shown ... View more

To recreate: Go into any dashboard Click PDF at the top The pop-up screen looks like this The circled Paper Size A4 is the issue. ... View more

  Background and customer pain points Currently Sisense is capable of showing numeric figures in abbreviated format, but only in the American/European short scale form: thousand (k), million (M), billion (B), trillion (T). In east Asian countries, there is a different scale form, so viewing information in these k/M/B/T is very difficult to understand.  Non-abbreviated Standard abbreviation (US/Europe) Indian abbreviation East Asian abbreviation 1,000 1 k (thousand) 1,000 1 千 10,000 10 k 10,000 1 万 100,000 100 k 1 lakh 10 万 1,000,000 1 M (Million) 10 lakh 100 万 10,000,000 10 M 1 crore 1000 万 100,000,000 100 M 10 crore 1 億 1,000,000,000 1 B (Billion) 1 arab 10 億 10,000,000,000 10 B 10 arab 100 億 100,000,000,000 100 B 1 kharab 1000 億 1,000,000,000,000 1 T (Trillion) 10 kharab 1 兆 Business case description/value To be able to select the scale form for number abbreviations for different APAC regions as well. Use case A user in Europe is creating a dashboard in Insights with an indicator to show total profit in an Indicator form. Let's suppose that the total profit to display is 1,610,000. 2. Europe user formats the content to abbreviate the display in the short scale form. User will see "1.61 M". 3. A user in Japan is creating the exact same dashboard on the same data. 4. Japan user formats the content to abbreviate the display in Asian scale form. User will see "161 万". 5. A user in India is creating the exact same dashboard on the same data. 6. India user formats the content to abbreviate the display in the India scale form. User will see "16.1 Lakh".   ... View more

It would be better to have more control options over exactly when the email report for a dashboard is triggered out to users. Currently we use the option "Every Elasticube update. No more than 1 emails per day" but that has issues: 1) We would only like the email to send if the Elasticube update is successful, rather than every update (including build failures). Otherwise we send a report out with missing data. 2) The rule of "No more than 1 emails per day" doesn't seem to be working properly. Meaning if we refresh the Elasticube more than once per day, users are receiving duplicate reports. ... View more

Selecting a value in a row selects only the value and not the row. This prevents passing a specific value unless the unique value is exposed in the table and selected by the user. Right clicking on a value in a row should provide the option to select the specific value that was clicked on, or the specific Row that the value is in. For instance: A pivot table of people with lots of names and dates. If a user finds the person they want to drill into they can drill into the name, but there might be duplicate names, so the drill through will have all the people with the same name. If they select the birthdate of the record it will drill into that birthdate, not specific person with that birthdate. A third unique value has to displayed for each result, like a userID. This value has no meaning for the end user, other than they have to click on the userID and only the userID if they want to drill into that user. There should be a way to select the row, not just a specific value. ... View more

There should be an Embed SDK function that sets all editable Widget or Dashboards filters to Empty/“Include All”. Right now we have to either remove the filters completely and re-add them, or set each filter individually. It would be nice to be able to set them all at once. ... View more

Currently Notebooks provide a powerful opportunity to access and visualize data utilizing SQL and to add these to fusion dashboards.  Fusion's primary analytics environment allows for powerful dashboard-wide filters.   Currently dashboard filters do not apply to charts or tables which are created through notebooks even if the notebook is pointed to the exact same data table and column as other dashboard widgets.   Please develop the ability for dashboard filters to filter both fusion dashboard widgets and also notebook-based widgets.   ... View more

Hello, It is not possible to rename a cube, but it is possible de copy it. If we then move the existing dashoards to the copied cube, we have workaround to rename the cube. But with Perspective it is not possible to rename nor to copy. => It would be useful to be able to copy (duplicate) a perspective. Thank you ! Franck ... View more

Hi, We are having several issues when dealing with Elasticube Builds. We can now schedule the build (both UI and REST API), but we have no tool to monitor and control this key functionality. What's the history of the builds for a cube? When can we see the whole picture of the time each build for each cube happens to optimize resources and find concurrent builds in time? Now we can just see the last build log, as an isolated entity. We cannot monitor all the builds as a whole, to see the whole picture of all the builds (when it happened, how many time it got, etc.). As administrators, we have no way to control now this. Even we cannot check the history of builds for a cube. It's a critical feature for administrators.  Best ... View more

Hi Team,  In Support Portal we can have a lot of tickets raised and some of them are in Sisense side and some on our side.  Will it be possible to retrieve the info if a ticket is waiting from us or from Sisense directly in a list view ?  Thanks  Bastien   ... View more

working with the plugin ExtenedPivotOnPDF shows the header of the Pivot only on the first page, doesn’t show starting form the second page. Please add header of table on all the pages. ... View more