When building dashboards, a common frustration is the lack of ability to multi-select widgets and perform mass actions, such as moving a group of widgets all-together at the same time, or deleting multiple widgets at once. Currently, to do either of those actions, you must do it one-at-a-time on each widget individually. This is tedious and time-consuming if you have many widgets you need to move or delete. It would be nice if there was some way to select multiple widgets at once and perform some kind of mass action on them, like click-and-drag to reposition, or to select "delete" and delete all selected widgets at once. I'm not sure what the best way to do this would be. Perhaps a toggle at the top of the dashboard that allows you to click a checkbox next to each widget. Similar functionality already exists for the main dashboard list, on the left-hand sidebar...a toggle at the top will cause checkboxes to display next to each dashboard (or dashboard folder). Checking any of the boxes will cause additional options to display at the bottom of the sidebar, allowing you to export or delete the selected dashboards. Alternatively, if there were a way to "group" widgets into a container of some sort, then you could perform an action on that container which would apply to all widgets within it. For example, if you had a container, and then three widgets inside, you could select the container and move it, which would move the widgets as well, or you could select "delete" which would delete the container and everything inside it. ... View more

Upon receiving the warning "Maximum number of series (50) exceeded", the warning does not reappear with a widget, dashboard, or page refresh. Instead, a filter change is required in order to trigger it again. IMO the warning should persist with refreshes and be visible every time due to the impact of the limitation being exceed - data is literally missing from the widget and the widget does not reflect the data set expected by the user.  To that end of being clear about the impact of having more series than the limitation allows, the warning would be best reworded to indicate that impact and avoid users making decisions on an uncontrolled subset of data. For example, "Results limited to maximum number of series (50)..." or "Data limited..." This limitation should also be documented in Sisense documentation, but is not currently. ... View more

We currently have SSO enabled for our product development but we also have internal users who need to reset their password once in a while for personal or security reasons.  But the current behaviour is "if you have SSO enabled, users won't receive an email when they click forget password and only admins can reset their password instead". This is very troublesome and if you have a large organisations with hundreds of internal users, it is very difficult for the admins to manage that expectation.  Would really like to get some help from the dev team and allow "forget password" even when SSO is enabled!  ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

Goal Enable dynamic alerting based on history using formulas Enable reuse of conditional coloring rules for pulse threshold  Background Pulse allows you to trigger off of a threshold (e.g. > 10,000, <= 10) Conditional Coloring of widget values allows for functions (e.g. Min([Months in Date], [# of unique Transactions]) Perhaps the Automatic anomaly detection does this, but we have no visibility into what is results in an anomaly.  Also not sure if you have to wait for the anomaly detection to learn. e.g. the cube has been built every day for years and has years of data, but the widget was only created a couple weeks ago and the pulse alert was added yesterday.  Will it detect anomalies or out of bound conditions that we could write with a formula Desired Functionality Enable use of functions in Pulse thresholds similar to Conditional Coloring of widget values Ideally enable reference to the Conditional coloring options for the widget.  The dashboard designer already built it into the dashboard. The user just wants a pulse alert when the widget turns RED.  Provide means of selecting from existing conditional coloring rules (Whether they are static values or forumlas) when building/editing the Pulse tile. ... View more

We find our clients sometimes using the widget information (i) button to provide their users with context for a widget. Their users sometimes click the button in search of information even when the designers haven't added any text to the widget information button. It would be helpful for end users to have a way of knowing before clicking that the widget information does or doesn't have additional information about the widget. ... View more

---Summary:--- When you jump to dashboard, your dashboard filters are carried over to the destination. I want to also carry any Drill Into breadcrumbs. ---Example / use case--- I right-click on a FieldA row in my PivotTable and drill it down to FieldB. Then I click on a number to Jump To Dashboard. The destination filters for the FieldB row I clicked on, but it doesn't filter FieldA. That's fine when FieldB.value occurs only as a child of FieldA.value. But some of my FieldB items are repeated in several FieldA items. For example: Many cities have a "Main Street". I right-click and drill-down on New York's street names. Then I click on data for Main Street to jump. The destination dashboard will show data for every Main Street in every city, instead of just New York's. --- Can you make JTD respect such a drill-down? --- PS: I also made a request about making Drill create dashboard filters. That would partly solve this request, but not fully: Sometimes, I don't want Drill to create dashboard filters, but I will still want the Drill to be respected by JTD. ... View more

Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

Simply put, the ability to have a button within the UI for when new users are created within a particular data group (or similar category) to replicate permissions, DS, dashboard sharing, pulse, data model shares, etc.  Even simpler, the ability to have a column within User Mgmt. to show which dashboards are shared with which user.  ... View more

Opening a dashboard which leads to a temporary error will redirect the user away from the dashboard URL to a 'dedicated' error page, e.g. 'https://xxxxxxx.sisense.com/app/main/error?status=404'. If this is a temporary error and the user refreshes this page they will never return to their intended destination - they are stuck on the error page forever. This causes confusion for our clients. Is there a way to change the way errors work so that I'm not redirected to a 'dedicated' error page and instead I can refresh the page and see my intended dashboard once the error is resolved? ... View more

This is a request to enhance this feature in community thread of the same title. This is useful because it allows users to see all the available dimension for a particular list of filters even if there are no facts for it. I understand that we can also use this community thread; however, this is only limited to 1 dimension. However, right now, it does not work when [Columns] field are added into pivot table. We would like to add a date/day [Columns]. Ideally for us, the left outer join should only be by the [Row] and allow data to be broken into [Columns]. ... View more

Currently, we are using below Rest API to generate a daily report to know the users, groups, roles etc.  /api/v1/users/get We need an additional field (last_password_change_date) for reporting that would tell us when the user changed the password. ... View more

I would like to see some improvements regarding the pivot table in Sisense: Measures as rows Right now, when you add multiple measures to the pivot table they are automatically added as an extra column. Every major player in the BI business allows for measures to be added as rows, I would like Sisense to do so as well Expandable dimensions (could be used for almost every widget type) Let's say I have a pivot table showing revenues with categories as rows and years as columns. Ideally, I would like these to be expandable, i.e. if I click on the + icon for years, it should show me the quarters, months and so on. This could also be implemented for line, bar and column charts.  For categories e.g. I would like to expand to sub-categories. The drill-down we have right now doesn't work, it zooms in on just 1 category losing an overview of the data.    ... View more

Cube build alerts via webhook should receive which cube has triggered the alert. This is required especially when we configure a single alert for multiple cubes As of now, we are only receiving following info. {buildSuccess: false, name: Cloned sisense alerts, type: build} With this info, we do not understand which specific cube has failed. ... View more

I've been trailing the Report Manager add-on and was disappointed to see that the 'Event Based' option for triggering reports did not allow for Pulse Alerts to be used as an Event. It seems the current workaround is to use a tool like Zapier (so the pulse goes out to Zapier via webhook, which then creates the Event and goes back into Sisense, causing the report to be sent. This seems convoluted and I would have thought being able to directly integrate Pulses to trigger Reports seems like a natural fit. ... View more

This is an "add on" request to this product request. Our customers need to be able to filter on datetime columns using a combination of both the date and the time. I'd like to see this added as a capability of filtering. For example, I'd like to filter records from "0800 yesterday to 0800 today". Or "0800 on Monday to 1700 Wednesday". Or "0800 4/1/23 to 0800 4/5/23". ... View more

Many of our clients have found it confusing that the formula editor will sometimes render AGG( [Data Field] ) and sometimes render [Agg Data Field]. They are the same, and people eventually learn that they are the same thing. Still, we field more support tickets than I'd like in which we find formulas that contain things like AGG( [Agg Data Field] ). For example, SUM ( [Total Quantity] ). ... View more

Add the ability to programmatically export a Widget with specific filters and/or to export it as a certain user using the /dashboard/{id}/widgets{id}/ endpoint. User Story#1 As an admin I want to make api calls to the widget pdf export endpoint and include userid and custom filters so that I can download an export on behalf of another user in the system and specify the filters  Acceptance Criteria I can pass 2 properties to the export endpoint: User Id and filters Both parameters are optional and can be used separately from each other If a user Id parameter is provided, the Widget is exported on behalf of the provided user including the current filters applied and data security rules. If a custom filters parameter is provided, the Widget is exported with the custom filters. There is no merge between the existing Widget filters and the custom filters parameter.  The is an option to provide an empty custom filters parameter, in this case, no filters are applied to the dashboard.  User story #2 As a user (not admin) I want to make api calls to the Widget pdf export endpoint and include custom filters so that I can download an export with custom filters  Acceptance Criteria I can pass a custom filters parameter to the export to the Export endpoint The custom filters parameter is a jaql query that will replace the current dashboard filters The custom filters will respect my data security  I can provide an empty custom filters parameter that will remove all filters from the report. ... View more

Hi, Currently in the filters, we are unable to directly filter a comma separated list of entries. The options available are individually selecting the members, however that can get tedious if the list of entries we need to filter are large. For example, filter more than 100 entries. The other option is using the custom option in the filter. However, that too requires JAQL code which might be difficult for non technical users.  It can be useful to have the option to directly copy paste a comma separated list of entries in the filters instead of multiselecting or using the custom JAQL option.   ... View more