the display format of the cube build time is shown as "Nov 8, 2023 2:00:01 AM" We should have option to format it to "11/08/2023 02:00 ' i.e. MM/dd/yyyy HH:mm:ss' ... View more

We would like the ability to modify attribute names and shared formula names without breaking dashboards or requiring partner plugins.   ... View more

A user would like to remove the title from the secondary indicator. Unchecking the Title box works for only the primary value. They would like the same functionality for the secondary. ... View more

As of L2023.3, in Sisense’s Helm Charts , “Tolerations” are supported by the micro-services. It prevents end-users from configuring “Taints” on the node that they want to dedicate to Sisense. Since no “Taints” are configured, so all nodes can become eligible to host Sisenses’s pods. They experienced that scenario when pods from some other application services were scheduled on a Sisense node. Would you please consider allowing the pods to be protected not only with  “Toleration” but also with “Taints”. The justification for this is that, even though it is mentioned in prerequisites documents that Sisense should be installed on dedicated servers, there is a non-negligible factor from the customers perspective that is the overhead administrative costs, especially for customers who must already manage numerous clusters for several applications, multiple environments, and redundancy.   ... View more

There are cases where the Sisense queries have to read from views. Would you consider allowing to issue queries like “ALTER database.materializedView REBUILD”  instead of only allowing select commands, in this case this would allow to refresh data that would be selected by the jdbc connector. ... View more

Hello, Currently, we can only sort reports based on column "Report name". It would be good to sort reports based on "last run" column too. It would also be good to have sizeable column headers for better readability. Thank you ! Franck ... View more

  Background and customer pain points Currently Sisense is capable of showing numeric figures in abbreviated format, but only in the American/European short scale form: thousand (k), million (M), billion (B), trillion (T). In east Asian countries, there is a different scale form, so viewing information in these k/M/B/T is very difficult to understand.  Non-abbreviated Standard abbreviation (US/Europe) Indian abbreviation East Asian abbreviation 1,000 1 k (thousand) 1,000 1 千 10,000 10 k 10,000 1 万 100,000 100 k 1 lakh 10 万 1,000,000 1 M (Million) 10 lakh 100 万 10,000,000 10 M 1 crore 1000 万 100,000,000 100 M 10 crore 1 億 1,000,000,000 1 B (Billion) 1 arab 10 億 10,000,000,000 10 B 10 arab 100 億 100,000,000,000 100 B 1 kharab 1000 億 1,000,000,000,000 1 T (Trillion) 10 kharab 1 兆 Business case description/value To be able to select the scale form for number abbreviations for different APAC regions as well. Use case A user in Europe is creating a dashboard in Insights with an indicator to show total profit in an Indicator form. Let's suppose that the total profit to display is 1,610,000. 2. Europe user formats the content to abbreviate the display in the short scale form. User will see "1.61 M". 3. A user in Japan is creating the exact same dashboard on the same data. 4. Japan user formats the content to abbreviate the display in Asian scale form. User will see "161 万". 5. A user in India is creating the exact same dashboard on the same data. 6. India user formats the content to abbreviate the display in the India scale form. User will see "16.1 Lakh".   ... View more

Selecting a value in a row selects only the value and not the row. This prevents passing a specific value unless the unique value is exposed in the table and selected by the user. Right clicking on a value in a row should provide the option to select the specific value that was clicked on, or the specific Row that the value is in. For instance: A pivot table of people with lots of names and dates. If a user finds the person they want to drill into they can drill into the name, but there might be duplicate names, so the drill through will have all the people with the same name. If they select the birthdate of the record it will drill into that birthdate, not specific person with that birthdate. A third unique value has to displayed for each result, like a userID. This value has no meaning for the end user, other than they have to click on the userID and only the userID if they want to drill into that user. There should be a way to select the row, not just a specific value. ... View more

There should be an Embed SDK function that sets all editable Widget or Dashboards filters to Empty/“Include All”. Right now we have to either remove the filters completely and re-add them, or set each filter individually. It would be nice to be able to set them all at once. ... View more

Currently the box and whisker plot is not supported when using a live model. When the widget is created, it has an error and won't show any data. We would really like that to be supported on the live model. Article showing that its not supported: https://docs.sisense.com/win/SisenseWin/live-connect.htm ... View more

The default color scheme for the sunburst chart is defined per ring, while it should be per category. For example, category 1 has the red color, category 2 has green, and category 3 has blue color scheme ... View more

A while back the JTD didn't pick up measured values properly and we configured our dashboards so that the measured value filters were not relevant to the jump. We have some situations where there are conflicting filters with-in the measure (e.g. comparing different things as a numerator and denominator). Can you add a widget config option to ignore measured value filters? It would require adding an item in config and then adding an if statement to the filtersHelperService.js in the getMeasuredValueFilters like if(config.ignoreMeasureFilter) return [] ; around line 560. This would greatly help us out as we do have fairly complex filters running and much more often than not want to only consider dashboard and widget filters in the Jump. ... View more

working with the plugin ExtenedPivotOnPDF shows the header of the Pivot only on the first page, doesn’t show starting form the second page. Please add header of table on all the pages. ... View more

I have a client that has SSO users and non-SSO users.  On Sisense advice, we have created a separate tenant for the non-SSO users.  We expect that those users would have all user email features of users as if SSO did not exist on the system.  We are finding that the new user invitation email is not enabled for these users (among other email functions).  Therefore, these users are not able to set their passwords when they are created.   As a result, we are using a common password for 600+ users.  This is obviously not satisfactory.  Those tenant users can now log in and change their password, but we have no way to enforce that they do this as we would with an invitation email.   R&D has told us this is the expected behavior (refer to case #00746676).  This behavior is not working well for my client.  I would like all user email features enabled for non-SSO tenants. ... View more

At the moment, you can do row filtering in a Data Model, by applying an enforced filter.  This works fine in simple scenarios. In my case, I have 150 different users who each need to be able to see only their own data.  So I have to add them one-by-one to the data model's "Data Security" area.  Not only that, I have to do this to 10 different cubes, so this will be a lot of manual effort to set up and maintain over time as people come and go. What I'd like to be able to do is define a custom attribute on the User record, like "Location ID".  I'd fill it in for that user, entering "12345" for a particular user record.  That User is also a member of a group called "My Restricted Group". Then, I could go into the Data Security section, add an entry for the Location ID filter, applied to "My Restricted Group", and reference the "Location ID" number.  Then the system would enforce it at runtime -- is the logged in user a member of "My Restricted Group"?  If so, apply a fiter on the Location ID field, and fill it in with the value in their User profile. Then I only have to maintain the Location ID value in their user profile once, and only need to apply that Location ID filter once per cube, not 150 times per cube. ... View more

Sharing and emailing out dashboards currently have a time zone setting where a user could specify when a dashboard should be emailed out in a specific time zone. Report Manager is meant to manage dashboard emailing/schedules.  It would make sense to include the same time zone setting capability available in dashboard sharing. ... View more

When you duplicate a widget in Analytics, it automatically duplicates next to your current widget. If you already have multiple widgets in that row (which you've spent time sizing to give a nice appearance on the dashboard - and they're not just distributed evenly on the row), the new widget then resizes all the previous widgets in the row so it will fit onto the row. When you then move the new widget to its own row, the widgets on the previous row have to then all be resized to get the sizes you wanted again.  Some options for different experiences... Option to duplicate widget to bottom of dashboard Option to duplicate widget to "new row" which puts the new widget on its own dedicated row below the row from which it's being duplicated When a widget is duplicated on a row, and then moved out of that row, maybe the remaining widgets could redistribute back to how they were prior to the duplication ... View more

I would like to be able to run a "lineage/dependency" report in Sisense. Something that will tell me for all the cube/live data sources: - Data source name - Type (cube/live) - Dates of the data model (created, modified, last built) - Data sources being referenced and type (web service, database, etc.) - Details of each data sources (SQL Server, servername, database name) - Tables or objects being referenced by those data sources It's important for managing the environment to know what we are using, or have an easy way to know what data sets/dashboards would break if a table's structure were changed in the database. ... View more