Bar charts show the bars sorted in order by their label.  Sometimes you want the bars to be in ascending/descending order by their sizes (i.e. the value being measured), so that the most significant items are on one side or the other.   While we're at it, the option in the bar chart design to Limit the number of bars being shown to just the "Top X", would help where you have situations where again you want to focus on the most significant items (smallest or largest) without outliers throwing it off. ... View more

Looking for a way to change the logo based on their corresponding theme. We can create themes for the different companies but there is no option for logo in the Theme and would like to capability to extend the white labeling past just 1 logo ... View more

When we access the widget data directly(Here we are fetching data from JAQL call itself and are not fetching data using CSV request to Sisense) then it shows N/A instead of a blank string(where the value is NULL). Is there any way where we can get a blank string in place of the N/A which is being shown to represent a Null value? ... View more

Hello, Currently, when we want to add a recipient to a new dashboard schedule, the dashboard has to be previously shared with the recipient. If it isn't, the recipient doesn't show up in the autocompletion list (emails - users name). In that case you need firstly to go back to the dashboard, share it with the recipient, come back to ReportManager and finally, add the recipient to the new schedule. This is confusing to our users who in such case consider this as a bug. => New behaviour wished :  When you add a recipient to a ReportManager schedule it automatically shares the dashboard with him. Which makes sense since if you want to send a dashboard to a user, it implies you want to share it with him. ... View more

The idea of this is so you could show the elasticube data on the primary axis, and then potentially low latency data on a secondary axis - allowing easy comparison of live vs historical data ... View more

Sisense charts show tooltips when you move the mouse above them. When showing those tooltips the website automatically formats numbers in the tooltip in order to simplify the reading and shrinks those numbers if they go above 10k. Most of the times this is what I want as a user, but not always. According to my observations, tooltips stop showing the real number and show a simplification when it goes above 10,000  (e.g instead of showing 16742 it will show 16.7k). This idea would be to allow this number to be displayed in full instead of the shrinked version. Sometimes it is just useful to see the real value and not the simplified one. As a user, I'd like to see the real one sometimes. There are two possible ways of implementing this that come to mind, in the Tooltip section when editing a graph: Add a checkbox, clickable, with the current behaviour by default "[ ] Show raw numbers". This would be below "[ ] Show Total in tooltip" Add a threshold numeric input so that users could manually specify from which number onwards the formatting would shrink (e.g 10,000 by default).  "Shrink numbers above: [            10000]" First option is simpler to understand, second one is more flexible.  Right now, the workaround I'm using is to Edit a chart, then click on "Output" in order to see the real numbers as a table, but this is inconvenient. Here is an example of the number I'm referring to, in a chart. You see 15.9k and I'd like to see 15935.   ... View more

Jump to Dashboard allows us to select values within Pivot tables and show the details of the items. This is user friendly and more efficient for users.  However, the feature does not work when we call the widget via Sisense.JS.  ... View more

This is a request to enhance this feature in community thread of the same title. This is useful because it allows users to see all the available dimension for a particular list of filters even if there are no facts for it. I understand that we can also use this community thread; however, this is only limited to 1 dimension. However, right now, it does not work when [Columns] field are added into pivot table. We would like to add a date/day [Columns]. Ideally for us, the left outer join should only be by the [Row] and allow data to be broken into [Columns]. ... View more

When creating widgets using the day of the week as a category, the categories are sorted alphabetically by the day of the week (Friday, Mon, Sat, Sun, Thu, Tue, Wed) instead of sorting by the actual order of the days of the week (Sun-->Sat, or Mon-->Sun). Seems like an obvious, and absent, feature. ... View more

When creating a widget in SimplyAsk, We would like to see the download option extended to offer exporting to excel/CSV if the table viz is the best option. Some viewers might not be able to pin it to the dashboard but still want to extract the insights.  ... View more

On the Analytics page, there is a menu on the left where dashboards are listed. It is possible to create folders to organize dashboards. Folders can be nested within other folders. Currently, It is not possible to drag and drop one folder into another. This would be useful to have. ... View more

We want to be able to see certain metrics by day of the week on bar chart to detect certain patterns without adding a separate day of the week field for every date stamp into our data cube.  ... View more

Major process changes were made on a specific date in May. We would like to be able to add a phase change line in graph to represent an event change, so we can clearly see before and after comparison. ... View more

Being able to use only 1 field to aggregate on when breaking by a dimension is quite limiting when we are wanting to look at YoY trends on a stacked column chart. I am surprised this has not been brought up yet as one would think this is a fairly common analytical need.  As a broad example, how would one look at YoY sales by day and stacked by product types? ... View more

Use Case: As a user, I want to be able to share a dashboard with another user with the pre-selected filters so that they can see the same results as I do. Description: The current functionality of the dashboard filters is user-specific, meaning that each user has their own selected filters. However, there is a need to enable users to share a dashboard with another user, ensuring that the pre-selected filters are applied, allowing them to view the same results. This enhancement would allow a user to easily share a dashboard, including their filter selections, with another user. When the recipient accesses the shared dashboard, they would see the same filter settings as the original user, providing a consistent and synchronized view of the data. By enabling the ability to share dashboards with pre-selected filters, users can streamline collaboration, discussions, and decision-making processes. This feature enhances the dashboard-sharing experience and ensures that all parties involved are viewing the same data and insights. ... View more

When Pivot or Table widgets, the options for formatting a datetime column allow showing the date OR the time, with no option to show both together (e.g. if format was "dd/MM/yyyy HH:mm:ss" then we could get "23/10/2022 17:05:21").   ... View more

For users who wish to receive their Dashboard contents using the Subscription service, Sisense supports embedded emails or PDF format only. For convenience and expedience, I would like to see support for users to receive compatible Dashboards (e.g. Pivot Tables) directly as an Excel attachment. This will help for users who wish to receive regular emails containing important data in Excel format for integration with other systems.  ... View more

Would like to have the ability to share multiple dashboards at one time instead of 1 at a time. Moving to Sisense from another software and having to share 50+ dashboards is very time consuming. ... View more

Hi, I want to show in my dashboard the values of the last 12 months period. As I do not want to select the month every month manually, it should be dynamically taking always the last 12 months. So far I am using the advanced settings in the filter: { "last": { "count": 12, "offset": 0 }, "custom": true } The issue is, that my available data is not always up to date. Therefore, I want to select the last 12 months counting the offset back 2 months from the selected month in the filter. As far as I understood is that the offset counts back from the current date disregarding the filters settings. I would need something like thi: { "last": { "count": 12, "offset": 2 (counting from date selected in "sale date" filter) }, "custom": true } ... View more