Upon receiving the warning "Maximum number of series (50) exceeded", the warning does not reappear with a widget, dashboard, or page refresh. Instead, a filter change is required in order to trigger it again. IMO the warning should persist with refreshes and be visible every time due to the impact of the limitation being exceed - data is literally missing from the widget and the widget does not reflect the data set expected by the user.  To that end of being clear about the impact of having more series than the limitation allows, the warning would be best reworded to indicate that impact and avoid users making decisions on an uncontrolled subset of data. For example, "Results limited to maximum number of series (50)..." or "Data limited..." This limitation should also be documented in Sisense documentation, but is not currently. ... View more

We currently have SSO enabled for our product development but we also have internal users who need to reset their password once in a while for personal or security reasons.  But the current behaviour is "if you have SSO enabled, users won't receive an email when they click forget password and only admins can reset their password instead". This is very troublesome and if you have a large organisations with hundreds of internal users, it is very difficult for the admins to manage that expectation.  Would really like to get some help from the dev team and allow "forget password" even when SSO is enabled!  ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

It would have been great if there was a quicker way to update the SSL certificates on the Sisense server without having to run the update install. There are clients who do not wish to provide internet connection on the server once Sisense install is complete. As I understand it, if Sisense was installed with internet connection on, then we need to have internet connection in order to re-run the installer successfully. So we will have to make a request to the client to provide internet connection again to run the update install. It would have been good if there was an alternative way to update the SSL certificate.  ... View more

Goal Enable dynamic alerting based on history using formulas Enable reuse of conditional coloring rules for pulse threshold  Background Pulse allows you to trigger off of a threshold (e.g. > 10,000, <= 10) Conditional Coloring of widget values allows for functions (e.g. Min([Months in Date], [# of unique Transactions]) Perhaps the Automatic anomaly detection does this, but we have no visibility into what is results in an anomaly.  Also not sure if you have to wait for the anomaly detection to learn. e.g. the cube has been built every day for years and has years of data, but the widget was only created a couple weeks ago and the pulse alert was added yesterday.  Will it detect anomalies or out of bound conditions that we could write with a formula Desired Functionality Enable use of functions in Pulse thresholds similar to Conditional Coloring of widget values Ideally enable reference to the Conditional coloring options for the widget.  The dashboard designer already built it into the dashboard. The user just wants a pulse alert when the widget turns RED.  Provide means of selecting from existing conditional coloring rules (Whether they are static values or forumlas) when building/editing the Pulse tile. ... View more

Add the ability to programmatically export a Widget with specific filters and/or to export it as a certain user using the /dashboard/{id}/widgets{id}/ endpoint. User Story#1 As an admin I want to make api calls to the widget pdf export endpoint and include userid and custom filters so that I can download an export on behalf of another user in the system and specify the filters  Acceptance Criteria I can pass 2 properties to the export endpoint: User Id and filters Both parameters are optional and can be used separately from each other If a user Id parameter is provided, the Widget is exported on behalf of the provided user including the current filters applied and data security rules. If a custom filters parameter is provided, the Widget is exported with the custom filters. There is no merge between the existing Widget filters and the custom filters parameter.  The is an option to provide an empty custom filters parameter, in this case, no filters are applied to the dashboard.  User story #2 As a user (not admin) I want to make api calls to the Widget pdf export endpoint and include custom filters so that I can download an export with custom filters  Acceptance Criteria I can pass a custom filters parameter to the export to the Export endpoint The custom filters parameter is a jaql query that will replace the current dashboard filters The custom filters will respect my data security  I can provide an empty custom filters parameter that will remove all filters from the report. ... View more

We find our clients sometimes using the widget information (i) button to provide their users with context for a widget. Their users sometimes click the button in search of information even when the designers haven't added any text to the widget information button. It would be helpful for end users to have a way of knowing before clicking that the widget information does or doesn't have additional information about the widget. ... View more

Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

After using the following property in customize JTD widget script for Pivot widget, JTD is enabled for all rows.  drillToDashboardNavigateTypePivot: 1 It would be great if we have an option of enabling JTD for specific rows.  For example, we are having 4 rows and 2 value columns in the pivot but want to have JTD linked to only "row2" and have that "row2" data passing to JTD as filter (as shown in the picture). NOTE: Customize JTD widget script referenced from Official Sisense documentation: https://www.sisense.com/marketplace/jump-to-dashboard/  ... View more

---Summary:--- When you jump to dashboard, your dashboard filters are carried over to the destination. I want to also carry any Drill Into breadcrumbs. ---Example / use case--- I right-click on a FieldA row in my PivotTable and drill it down to FieldB. Then I click on a number to Jump To Dashboard. The destination filters for the FieldB row I clicked on, but it doesn't filter FieldA. That's fine when FieldB.value occurs only as a child of FieldA.value. But some of my FieldB items are repeated in several FieldA items. For example: Many cities have a "Main Street". I right-click and drill-down on New York's street names. Then I click on data for Main Street to jump. The destination dashboard will show data for every Main Street in every city, instead of just New York's. --- Can you make JTD respect such a drill-down? --- PS: I also made a request about making Drill create dashboard filters. That would partly solve this request, but not fully: Sometimes, I don't want Drill to create dashboard filters, but I will still want the Drill to be respected by JTD. ... View more

This is a request to enhance this feature in community thread of the same title. This is useful because it allows users to see all the available dimension for a particular list of filters even if there are no facts for it. I understand that we can also use this community thread; however, this is only limited to 1 dimension. However, right now, it does not work when [Columns] field are added into pivot table. We would like to add a date/day [Columns]. Ideally for us, the left outer join should only be by the [Row] and allow data to be broken into [Columns]. ... View more

Simply put, the ability to have a button within the UI for when new users are created within a particular data group (or similar category) to replicate permissions, DS, dashboard sharing, pulse, data model shares, etc.  Even simpler, the ability to have a column within User Mgmt. to show which dashboards are shared with which user.  ... View more

Opening a dashboard which leads to a temporary error will redirect the user away from the dashboard URL to a 'dedicated' error page, e.g. 'https://xxxxxxx.sisense.com/app/main/error?status=404'. If this is a temporary error and the user refreshes this page they will never return to their intended destination - they are stuck on the error page forever. This causes confusion for our clients. Is there a way to change the way errors work so that I'm not redirected to a 'dedicated' error page and instead I can refresh the page and see my intended dashboard once the error is resolved? ... View more

Hi, There are many widget types that are part of the core of an analytical solution. Examples like Tabber, Jump to Dashboard, Accordion... are tools that the business users find very powerful and gives Sisense the fleixbility in the visualization that put the platform in the road to copete with powerful visualization tools like Tableau. But, the profile of most of designers are business analyst or business users. To use and to configure properly this kind of visualizations, makes them to enter in a Javascript world, that it's very confusing and dirty. It makes that the promise of "self service" is not to close. I should be great if the configuration of this kind of visualization will be made from an user interface, without the need to write JS code.  Best ... View more

I would like to see some improvements regarding the pivot table in Sisense: Measures as rows Right now, when you add multiple measures to the pivot table they are automatically added as an extra column. Every major player in the BI business allows for measures to be added as rows, I would like Sisense to do so as well Expandable dimensions (could be used for almost every widget type) Let's say I have a pivot table showing revenues with categories as rows and years as columns. Ideally, I would like these to be expandable, i.e. if I click on the + icon for years, it should show me the quarters, months and so on. This could also be implemented for line, bar and column charts.  For categories e.g. I would like to expand to sub-categories. The drill-down we have right now doesn't work, it zooms in on just 1 category losing an overview of the data.    ... View more

Currently there’s no way on the Sisense UI to have an overview of when the next ElastiCube Builds are set for. Having such info available would make it possible to easily select relevant time slots to run load testing scripts for instance, but also more broadly to help understand and finetune the current Builds orchestration. In order to do so, we would like for admin roles to have access to a single table-like page that would list all the Builds scheduled in the next 24 hours with the following columns: ElastiCube name Build start date Build theoretical end date* Last successful Build duration * Build theoretical end date = Build start date + Last successful Build duration * (or NULL in the rare event where the Build has never succeeded before) Additional features: CSV Export Sort option on column headers Pagination Note: a single Elasticube can have more than one entry (in the example below, we assume the admin user opens the page at 3:00 PM and the ElastiCube_B's Build is launched every 2 hours). ... View more

Cube build alerts via webhook should receive which cube has triggered the alert. This is required especially when we configure a single alert for multiple cubes As of now, we are only receiving following info. {buildSuccess: false, name: Cloned sisense alerts, type: build} With this info, we do not understand which specific cube has failed. ... View more

This is an "add on" request to this product request. Our customers need to be able to filter on datetime columns using a combination of both the date and the time. I'd like to see this added as a capability of filtering. For example, I'd like to filter records from "0800 yesterday to 0800 today". Or "0800 on Monday to 1700 Wednesday". Or "0800 4/1/23 to 0800 4/5/23". ... View more

Required feature to auto manage the license when on SSO. So that if a user drops out of organization or has not utilized the license in the last x days, Then the license is auto recovered from the directory and is free to be consumed. If it possible then please required document  with us. ... View more