When using dependent filters and selecting new filter values this automatically resets all filter values already chosen.  Whilst this is desirable from a security perspective, not all models have security applied.  The proposition here is to have a toggle or similar that the designer/owner of the dashboard can use to turn this behavior on/off.  Thus the reset reasoning behind this can be maintained if required for that model or use case and the behavior can be turned off if non resetting is optimal for the use case needed. ... View more

NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Hi, I have issue with setting two date dimensions in dashboard. The goal I want to achieve is to have a history of records, which are also have it's own date dimension. You can download model and dashboard. I would like to have difference in growth ower selected period for defined dates. For example 2 days ago I sold a car for 1000, and yesterday the proce have changed to 1500. The sale date is for today. So the growth over 2 days is 1500, and for 1 day 500. Additionally i would like to compare those values to previous year, and go back with both date dimensions. Tricky part is also, that if there is not sale for this year, PastYear() wont count prior year. I tried to play around with filtered measure plugin, however it doesn't give me exactly what i want. Do you have any suggestions how can I approach such data and 2 date dimensions? Thanks 🙂 ... View more

The only way non-Owners of Dashboards become aware of a Dashboard being republished is if (a) they happen to notice changes in the Dashboard design since the last time they viewed the Dashboard, or (b) if the Dashboard Owner (outside of Sisense) proactively notifies Viewers that they have republished the Dashboard. I would like to see a feature where there is a visual indicator to non-Owners that informs them that "This Dashboard has been republished by the Owner since the last time you viewed the Dashboard." An Even Better If would be to allow the Owner to add notes when they republish, and these notes could be visible to non-Owners the next time they open the Dashboard. ... View more

Currently, when adding a date field as a value in a pivot table, the only option is the # of years/# of days/etc. We need the option to add a minimum and/or maximum date for the selected rows. The current 'work around' for this is to create an integer date, and then use a script to format the integer to present as a date. However, when exporting the data, the date shows as the integer value in the exported data, which is an unacceptable result. Adding the date as a row value solves the export issue, but displays all date values for the lowest level of detail in the data source, which is also an unacceptable result. If it was possible to add the minimum or maximum of a date field as a value in the pivot tables, this would solve all of the issues we currently have. ... View more

I would like to have the possibility for a cube designer to provide a description per dimension. The dashboard designer would be given an help on the meaning of the data he is bringing in his report. The help text would show up on mouse over (tool tips) ... View more

Hi It's a need that we have found many times, related to the availability to design the dashboard layput with a dinamic grid, not just columns and widgets in the same column. Users demand more flexibility on the layout design. ... View more

Would like to have the ability to share multiple dashboards at one time instead of 1 at a time. Moving to Sisense from another software and having to share 50+ dashboards is very time consuming. ... View more

Currently, the Area Map widget only offers two map types: World and USA. This becomes problematic if your data is limited to a specific country (Indonesia, in my case), and you only want to display that country on the map. I've managed to filter for Indonesia using the following code: ...res.geoJson.features.filter(feature => feature.properties.name === 'Indonesia'), However, this approach leads to another issue: when the dashboard loads, the Indonesian area is too small, and I have to manually zoom in. I would greatly appreciate any code or method to set the widget to automatically zoom into the Indonesian region when displayed on the dashboard. ... View more

Currently the Usage cube has a dimUsers table that has User Name but it is the email address.  It can be tough to know just from an email address, who the person is.  It would be nice to have the First name and Last name of the user available.  Certainly I could try to make a connector into the mongoDB and lookup the First/Last based on the user id.  But a) I don't want to modify the out of the box usage cube and b) that seems like a lot of work for something that could be added as part of the out of the box usage cube. Thanks, Chris ... View more

Hi, Working on a dashboard containing 3 pivot tables. Each have a lot of columns. (see print screen attached). In order to have a proper PDF, I need to turn the page format to A0 / landscape When exporting to PDF at the Dashboard level (from the pdf button top right), I access to a PDF setup, where I can choose the layout (landscape) and the paper format (A0), so that all the columns appears properly. In this screen, there is a Save button so that the PDF setup is saved for next time (see print screen) When exporting to pdf at a widget level, the same setup otions are available (landscape and A0), BUT THERE IS NO SAVE BUTTON. I have to redo this setup each time (see print screen). Could we have the the Save button on the widget / PDF option page, same as we have ar the dashboard / pdf option page please ? Thank you ... View more

We want to rotate the API key for our system user but need to make sure there's no downtime.  This means we need to have 2 keys working in parallel for the same user for a period of time until we can cycle all of our services to pick up the latest api key. The problem is as soon as the API key is rotated, the old key immediately stopped working.   Majority of systems out there support key rotation (like allowing a time delay before the old key expires like FB app, or ability to temporary create a second key and then we can promote it as primary once we are ready).   Key rotation is a best practice for security principles. ... View more

It takes 5-10 seconds to load the Manage Cases page in the Support Portal. It takes even longer to open a specific case. A case can only be opened in the same window as the Manage Cases page. To go to another case requires going back to the Manage Cases page first and waiting for it to load again.  Please allow cases to be open in a new tab so that the Manage Cases page doesn't have to be reloaded so frequently, and many cases can be open and loaded concurrently rather than one at a time. Thanks for considering. ... View more

While editing/viewing a cube data source, you can view the logs of the last build, but can't easily see the overall history of builds for that one cube. It would be nice if you could click on the "..." menu and choose View Build History.  A dialog box would pop up showing the most recent 10 builds (or whatever), sorted by date, with start/end datetime, duration, success/failure, etc. ... View more

We embed Sisense into our application and produce pre-built dashboards for customers (which they cannot edit). We allow our users to create their own dashboards as well and with this comes the ability to create their own formulas. We have found that allowing them to edit the name of their formula also allows the editing of our pre-built shared formulas and our attributes. While this only impacts the user locally, it can become a support nightmare, as customers can rename our pre-built items and make it hard to them troubleshoot. We would like the ability to make these edit options more granular so that we can control (1) Shared Formula name edits (2) Attribute name edits and (3) non-shared Formula, local user dashboard, name edits. ... View more

Hello we would be pleased to see possibility to upload custom error pages in Sisense. 403, 404, 500. Also when you will end on not existing page e.g. /app/de. It would be perfect if such pages could also be translatable. It could be set as Look and Feel option or wherever you like.  ... View more

Creating security rules within the Data Security menu for Elasticubes only allows you to assign users access to values to that are already in your data. If I am creating a rules for user visibility of e.g. individual 'store references' and a new store with reference '1414' is added, I can't create a rule for store 1414 unless it is already in my data. Could there be an option to manually specify the value, rather than having to select a pre-existing value? (I am aware this possible to add via the REST API, but this is a bit fiddly for frequent small edits). ... View more

The helm chart supplied with Sisense allows global annotation of all service accounts within the sisense namespace. For example I can annotate an AWS role that is able to be assumed by pods: helm upgrade sisense ${sisense_chart} --namespace sisense \ --reuse-values \ --set global.serviceAccountAnnotations."eks\.amazonaws\.com/role-arn"=${pod_role_arn} While this covers most of the pods by updating all the sisense-* service accounts in kubernetes the ec-build pod (the one that actually builds the elasticube) only uses the default service account in the sisense namespace. A workaround is to annotate the default service account: kubectl annotate serviceaccount default eks.amazonaws.com/role-arn=${pod_role_arn} --namespace sisense But it seems odd that the pod would a) assume the default service account when all other pods have service accounts explicitly defined for them and b) despite having gone to the trouble of wiring up global service account annotations in helm for them not to be applied at the final step of elasticube building. This specific use case is for supplying web identity tokens to a JDBC driver so that you can interact with AWS by using a specific OIDC assumed pod role, rather than using an EC2 role or worse, static credentials in a file or connection string. Even more specifically using CData JDBC parquet driver with S3.   ... View more

When a Sisense server's IP address changes, you have to reinstall Sisense. I want a script or button that changes all the relevant settings. We need it because we're planning changes to our network. There are other reasons that an IP address might need to change, e.g. I might restore from a system image backup to a different location, or I might start a new server and, after testing, want to redirect my old server's IP address to it. We'll do it by reinstalling, but that feels like more work than it should be. ... View more