Many of our clients experienced a defect in the Expand Pivot on PDF add-on in which the email body of their dashboard subscriptions included the full Pivot output... instead of the full pivot output being limited to the PDF attachment. With that defect in place for a year, a number of our clients have voiced dismay since the defect was corrected hoping that the defect will come back as a feature.  I would image that if enabled as a feature, that Embedded in Email could be unchecked to avoid including large pivot output in the email body. I imagine that users could understand their data well enough to understand whether a dashboard pivot widget would result in pages of output or not, and would be able to make the decision in the share settings for whether or not to Embed in Email or just Attach PDF or both.   ... View more

Hello, Currently the number of queries running in parallel during an EC build is set at the server level. With setting "Build / Base Table Max Threads" (4 by default). The optimised number of simultaneous queries is very much dependant on the context of the EC. For instance, an EC with 4 differents date source is more likely to accept a high number of simultaneous queries (spread over the 4 data sources), than an EC with only one data source. Therefore, I would like to suggest to make this setting per cube instead of at the server level. An alternative would be to have this setting at the Data Group level. Thank you and best regards, Franck   ... View more

Hi Sisense Team, When the same widget is used in multiple reports, could it be possible that when updates are done to the widget in one report, these updates are automatically done in all other reports that contain the same widget? Thank you! ... View more

Upon receiving the warning "Maximum number of series (50) exceeded", the warning does not reappear with a widget, dashboard, or page refresh. Instead, a filter change is required in order to trigger it again. IMO the warning should persist with refreshes and be visible every time due to the impact of the limitation being exceed - data is literally missing from the widget and the widget does not reflect the data set expected by the user.  To that end of being clear about the impact of having more series than the limitation allows, the warning would be best reworded to indicate that impact and avoid users making decisions on an uncontrolled subset of data. For example, "Results limited to maximum number of series (50)..." or "Data limited..." This limitation should also be documented in Sisense documentation, but is not currently. ... View more

Currently you only provide a direct link to a dashboard.  Allow the ability to have the ID of the dashboard. That way customers embedding the dashboard into their main app can load it natively into their app instead of directing the user directly to the Sisense instance. ... View more

The in app Look and Feel UI theme editor is an improvement to the CSS editing of the past, but it has removed some capabilities that were possible in the past. Items that should be added to the theme editor Primary Button Outline color Cancel Button Outline color Primary button hover state text color Cancel button hover state text color ... View more

Hello Everyone! There are a lot of Ideas around improving the ability to format the text in Widgets. We appreciate all the feedback! In order to make it easer for people to find and contribute to the discussion, I am combining them into this thread. Everyone, what are the customizations that you would like to see in the GUI rather than using a script? One of the ways we prioritize development efforts is by community interest. I encourage everyone to vote and comment on this suggestion and its comments. The more engagement a request receives, the higher the likelihood of it being considered for implementation. Thank you for participating, and we are excited to work with you to make a better Sisense! Have a great day! ... View more

Hi - Is it possible or planned to allow Sisense Narratives to connect to a different LLM provider? We are hosted in AWS and have restrictions around data transmission, so would need to use an internally available provider such as Bedrock instead of Arria for NLG. ... View more

My team was adding scripts to widgets to add attributes to the embedded widget and noticed an opportunity to expand what metadata we can use in the scripts. Currently, we're using the widget description (`desc` field) to set a testid attribute, but by default that description is viewable in the embedded widget.  I'd love the ability for designers to add key/value pairs to the Widget class metadata that are accessible in the widget script. widget.on('domready', function(w) { const { oid, customMetadata } = w; // customMetadata is the new (optional) property on a Widget const testId = customMetadata['testId']; // a key/value pair added by designer const selectorString = `[widgetid='${oid}']`; const widgetElement = $(selectorString); widgetElement[0].setAttribute('testid', testId); });   ... View more

I want an option to remove the "Can Design" role when sharing dashboards (yaml? admin settings? does it already exist?). I dislike the role because: Users don't realise that they're editing a temporary copy, and that the owner can Republish to overwrite. They might make many changes, and then months later someone republishes the owner/master version. I'm not entirely sure if republish always overwrites - if the user has made changes, do they keep their version when you republish or get the new one? If they keep theirs, it makes it confusing when trying to make changes requested by a user, because you make a change, click republish, and then the user forgets to click the revert-to-master-button. Instead of the Designer Role, users can just duplicate the dashboard. That way, no risk of overwrite or confusion.   ... View more

When a Sisense server's IP address changes, you have to reinstall Sisense. I want a script or button that changes all the relevant settings. We need it because we're planning changes to our network. There are other reasons that an IP address might need to change, e.g. I might restore from a system image backup to a different location, or I might start a new server and, after testing, want to redirect my old server's IP address to it. We'll do it by reinstalling, but that feels like more work than it should be. ... View more

we have data with timestamp from our IOT Device up to ms.   we created the data model with our data and when we create a dashboard we can put a date range filter. but this filter work for year month and day. because we receive many data, we would like to be able to filter per hours and minutes like 10 Minutes or 2 hours.   thanks, Alexandre ... View more

Required feature to auto manage the license when on SSO. So that if a user drops out of organization or has not utilized the license in the last x days, Then the license is auto recovered from the directory and is free to be consumed. If it possible then please required document  with us. ... View more

Currently, whenever a user starts a build in a cube, either everything is updated or only the changes that were made. It would be incredibly helpful to have the cube refresh only certain tables as indicated by the end user. ... View more

Hi, Currently in the filters, we are unable to directly filter a comma separated list of entries. The options available are individually selecting the members, however that can get tedious if the list of entries we need to filter are large. For example, filter more than 100 entries. The other option is using the custom option in the filter. However, that too requires JAQL code which might be difficult for non technical users.  It can be useful to have the option to directly copy paste a comma separated list of entries in the filters instead of multiselecting or using the custom JAQL option.   ... View more

When you export a datamodel to a .smodel file, the file includes connection information (server name, password, etc.). I would like an option to exclude that information when I click export. The export dialog already offers check boxes for Data Security, Scope Configuration, etc.; this feature could be just another one that says "Connection Information". Ideally, I'd like it to exclude the connection information by default, so users are forced to explicitly ask to include it, which will remind them to consider the file as sensitive. But I understand if you don't want to change default behaviour that other users are used to. When you import a model that has had this information removed, the import should let you to enter new connection information, or leave it as placeholders like Server=0.0.0.0 and password=Password so you can enter the information after importing. Sisense GIT already removes this information; this feature could work in a similar way. You could even deliberately make GIT's "non-tracked entities" all appear on the list of export options. GIT per this page: https://docs.sisense.com/main/SisenseLinux/asset-translation-and-management.htm?tocpath=Git%20Integration%7C_____3#Non-trac ... View more

Sisense currently supports Shared formulas to be moved as a part of data Models only. However not all Designers have access to edit/view data models So, they can't move shared formulas from one environment to another via data models Shared Formulas should be exported along-with Dashboards also   ... View more

We have had several users complain that the way series selection for charts is not intuitive. Currently, when you have multiple series in a line chart and click on one in the legend, it gets disabled to highlight the others. The intent is to allow focus, but it's the wrong way around - most users expect that the item clicked should be selected and the others hidden. The current behaviour is quite painful if you want to see one series when there are several (you have to click on all the others). Is there a simple way to reverse the selection behaviour, or do we need to look at other options: wrap the control and handle it ourselves (possible?) build some drop-downs/UI to allow selection of whats shown some other neat UI work-around?? ... View more

Currently, if we export the pivot as an excel/csv, there is no indication of the date range it was run for in the output file. It will be really helpful to have control on the exported output in excel or csv, such that we can include the date range of the result or other filters applied in the output. ... View more