We have found that if an ACL in a WAT does not match the Elasticube table/column security field, it defaults to providing 'all data'. To avoid a potential human error where a table/column has been renamed, we would like the default position to be 'nothing'.  ... View more

Instead of having to manually set the same format for each date type over and over, it would be nice if you could set defaults for each date type (Year, Quarter, Month, Week, Day) somewhere and have everything default to that with the ability to change away from the default if needed.  This could be done in the same area we set First Day of Week and Fiscal Year for the server. ... View more

1. View all history of builds and its corresponding logs from the cubes. Because, I could not see the last build failure reason, if another build got started. I need to wait for another build to complete or fail. 2. View all history of changes and provide a way to revert as in Google docs for both the cubes and dashboards. Some times, if something went wrong, we should just be able to revert to the previous version and continue from there. 3. Provide a way to view the list of cubes in the queue waiting for the build. Also, allow remove or disable them for a period or rearrange the queue to build. This will help in prioritizing something manual on demand. 4. If a cube build fails due to the memory or other configurations issue, provide suggestions like what has to be changed and based on what before triggering another build. 5. Provide a page to derive the suggested the configurations like memory, cpu, timeouts etc by collecting details like 1. Number of cubes, 2. average cube size, max cube size, min cube size, or number of cubes by size range say <5g, <10G, <20G, <40G etc.., 3. Frequency of the build per cube etc.. 6. Provide a page to view all the slow running dashboards, slow running queries and some suggestions to improve it. 7. Some times, if a dashboard got changed and republished, it is not getting applied to all the users. Provide a way to view the version of the dashboard the user may view. 8. Between builds, if there is not much change in the data, Sisense build should go faster. Provide a way like one common place to build each table from other sources individually and keep it ready. From there, if we build say functional cubes, it should build in flashing fast using the locally stored data. I see the cubes are pulling the data faster from relational db but very slow from mongodb. Now, if we are pulling data from another sisense cube or from the source no big performance difference. 9. Also, I am not sure, if we are restarting the nodes, should we necessarily mark the cubes in queue as failed, instead adding back to the queue as it was before the restart and just marking the actual cube got failed should be good enough. More later .. Thanks, Muthusamy J ... View more

It would be great if we were able to setup Active Directory for an individual tenant while having SSO enabled for another tenant. This would help us differentiate between our external customer facing and internal BI. ... View more

In browsers, usually links can be right-clicked. You get a menu including "Open in new tab" and "Copy link". Some Sisense links block this behaviour: e.g. the list of dashboards and jump-to-dashboard links. It'd be nice to get it back. To be clear: I do not want every link to open in a new tab. That would be annoying. I just want the option to do so. For example, here's a link where the right-click does work:   ... View more

As an admin, have an option at the top of a dashboard to be able to view it as another specific user.  For example, if user John Smith is set under the data security on a cube to only have access to rows for a certain region, the ability to view a dashboard as John Smith would make checking user access very easy. ... View more

When the sisense user is deleted the email of this user is still in the recipients list for a report in the Report Manager. If the report Manager is configured to send the reports to external customers, the user who is no longer with the company will be receiving the reports with dashboard data as the reports for the external users are generated using the owner or an additional user. Thanks. ... View more

When opening a support ticket, it's required that a large form be completed. Among these is the Sisense Account Type, Environment, and Version. We too frequently open a support ticket only to be provided with a response unrelated to the information provided in these fields (e.g. a Linux based recommendation after specifying the issue is occurring in a Windows environment and being asked for a version number after the information was already provided). Given the global distribution of Sisense support resources, it can already take a day before expecting a response, but for that response to then be unaware of the information provided in the ticket details causes delays, extra rounds of communication (especially when our support rep doesn't realize that the Sisense response is for the wrong version), and frustrates our support teams and the clients they in turn support. And we imagine the Sisense support reps don't love finding they sent irrelevant advice and don't like seeing our support reps' confusion when they aren't already aware of the information provided in the case opening form. We appreciate Sisense support reps and want to see them support us with as little friction as possible. Thanks. ... View more

We have created many folders (and subfolders) to help us organize our dashboards. It is currently very cumbersome to share folder access and ownership, which must be done for every dashboard within the folders. It would be nice if there were an easy (and native) way to share access to a folder and every dashboard within it, or to change ownership of a folder. ... View more

NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

There needs to be a way to deactivate user accounts rather than completing removing. We have users that will no longer have access to the system, but could come back later (for example, trail users). The workarounds are currently: reassigning security groups (means those users are still taking up licenses) writing our own user admin functionality (only makes sense if we are integrating users to another platform) Adding a 'Status' or 'Disabled' flag to the user account would accomplish this. ... View more

Currently, builds can only be scheduled in the UTC timezone. This is confusing for someone not in UTC and when you have to coordinate with external processes. The user should have the ability to schedule builds on their own timezone.  ... View more

It takes 5-10 seconds to load the Manage Cases page in the Support Portal. It takes even longer to open a specific case. A case can only be opened in the same window as the Manage Cases page. To go to another case requires going back to the Manage Cases page first and waiting for it to load again.  Please allow cases to be open in a new tab so that the Manage Cases page doesn't have to be reloaded so frequently, and many cases can be open and loaded concurrently rather than one at a time. Thanks for considering. ... View more

Creating security rules within the Data Security menu for Elasticubes only allows you to assign users access to values to that are already in your data. If I am creating a rules for user visibility of e.g. individual 'store references' and a new store with reference '1414' is added, I can't create a rule for store 1414 unless it is already in my data. Could there be an option to manually specify the value, rather than having to select a pre-existing value? (I am aware this possible to add via the REST API, but this is a bit fiddly for frequent small edits). ... View more

While editing/viewing a cube data source, you can view the logs of the last build, but can't easily see the overall history of builds for that one cube. It would be nice if you could click on the "..." menu and choose View Build History.  A dialog box would pop up showing the most recent 10 builds (or whatever), sorted by date, with start/end datetime, duration, success/failure, etc. ... View more

It would have been great if there was a quicker way to update the SSL certificates on the Sisense server without having to run the update install. There are clients who do not wish to provide internet connection on the server once Sisense install is complete. As I understand it, if Sisense was installed with internet connection on, then we need to have internet connection in order to re-run the installer successfully. So we will have to make a request to the client to provide internet connection again to run the update install. It would have been good if there was an alternative way to update the SSL certificate.  ... View more

When a Sisense server's IP address changes, you have to reinstall Sisense. I want a script or button that changes all the relevant settings. We need it because we're planning changes to our network. There are other reasons that an IP address might need to change, e.g. I might restore from a system image backup to a different location, or I might start a new server and, after testing, want to redirect my old server's IP address to it. We'll do it by reinstalling, but that feels like more work than it should be. ... View more

The Data Security tab's group/user assignment window currently has a max search limit of 20 results.   The "results" search limit should be configurable because we have approx. 50 groups that need to be assigned, & it is very difficult to find/assign/manage all of the groups when the search window does not return all of the appropriate results. ... View more

Currently there’s no way on the Sisense UI to have an overview of when the next ElastiCube Builds are set for. Having such info available would make it possible to easily select relevant time slots to run load testing scripts for instance, but also more broadly to help understand and finetune the current Builds orchestration. In order to do so, we would like for admin roles to have access to a single table-like page that would list all the Builds scheduled in the next 24 hours with the following columns: ElastiCube name Build start date Build theoretical end date* Last successful Build duration * Build theoretical end date = Build start date + Last successful Build duration * (or NULL in the rare event where the Build has never succeeded before) Additional features: CSV Export Sort option on column headers Pagination Note: a single Elasticube can have more than one entry (in the example below, we assume the admin user opens the page at 3:00 PM and the ElastiCube_B's Build is launched every 2 hours). ... View more