Current Behavior:  When user selects filter options such as Contains, Does not contain, Starts with, Does not start with , End with , Does not end with etc.  , the resulted suggestions can only be viewed , but cannot be filtered.  Proposal Users should be able to select a filter option, enter a value and use the suggestions to filter.  Currently its giving an inconsistent user experience (Some options are filterable such as Is, Is not,  & few others are not) OR, should display an appropriate label to say the least .  I initially considered this as a bug ,and later realized as a product design.  Thanks ... View more

Hi - Is it possible or planned to allow Sisense Narratives to connect to a different LLM provider? We are hosted in AWS and have restrictions around data transmission, so would need to use an internally available provider such as Bedrock instead of Arria for NLG. ... View more

we have data with timestamp from our IOT Device up to ms.   we created the data model with our data and when we create a dashboard we can put a date range filter. but this filter work for year month and day. because we receive many data, we would like to be able to filter per hours and minutes like 10 Minutes or 2 hours.   thanks, Alexandre ... View more

working with the plugin ExtenedPivotOnPDF shows the header of the Pivot only on the first page, doesn’t show starting form the second page. Please add header of table on all the pages. ... View more

Sisense currently supports Shared formulas to be moved as a part of data Models only. However not all Designers have access to edit/view data models So, they can't move shared formulas from one environment to another via data models Shared Formulas should be exported along-with Dashboards also   ... View more

We've been asked by customers for the ability to view more results than the current max of 10 ("showing first 10 results") when hovering over a data point in a scatter map. ... View more

We would like explanations to work with Formulas.  This have a few use cases that this benefit. Ideally a user can select a formula and generate a list of explanations with the data fields for the anomalies of the formula. ... View more

We have a few dashboards where the displayed data is only valid when a SINGLE ITEM is selected for a filter. We want to have the standard dashboard filters that our users are used to, but we want to prevent them from selecting more than one item at a time.  In the attached image, we want the red highlighted areas to be disabled (not selectable) for non-owners/non-editors of the dashboard.  We should be able to publish the dashboard with a default value for the filter and allow them to select a different value, but not multiple values.  ... View more

We have tried increasing the row limit for CSV download of live models to 250K rows but Report Manager is still limiting output to 5,000 rows which is the query setting of live models. We would appreciate a specific setting for Report Manager that determines the number of rows or have RM use the row limit defined for the report type (in this case CSV and 250K rows). Changing the query limit for the model does impact the report manager, but this impacts all users and every UI interaction, so the data retrieval volume explodes. There should be an independent setting related to report generation. ... View more

When we access the widget data directly(Here we are fetching data from JAQL call itself and are not fetching data using CSV request to Sisense) then it shows N/A instead of a blank string(where the value is NULL). Is there any way where we can get a blank string in place of the N/A which is being shown to represent a Null value? ... View more

Enhance the Header options when you download a widget as PDF (via ellipsis > Download > Download as PDF) to include the same options as when exporting a full dashboard as PDF. Dashboard PDF export offers "Date As Of", "Dataset Name" and "Dashboard Filters" in the Header options (attached). This is also needed when exporting specific widget, which only offers Title. ... View more

Sisense charts show tooltips when you move the mouse above them. When showing those tooltips the website automatically formats numbers in the tooltip in order to simplify the reading and shrinks those numbers if they go above 10k. Most of the times this is what I want as a user, but not always. According to my observations, tooltips stop showing the real number and show a simplification when it goes above 10,000  (e.g instead of showing 16742 it will show 16.7k). This idea would be to allow this number to be displayed in full instead of the shrinked version. Sometimes it is just useful to see the real value and not the simplified one. As a user, I'd like to see the real one sometimes. There are two possible ways of implementing this that come to mind, in the Tooltip section when editing a graph: Add a checkbox, clickable, with the current behaviour by default "[ ] Show raw numbers". This would be below "[ ] Show Total in tooltip" Add a threshold numeric input so that users could manually specify from which number onwards the formatting would shrink (e.g 10,000 by default).  "Shrink numbers above: [            10000]" First option is simpler to understand, second one is more flexible.  Right now, the workaround I'm using is to Edit a chart, then click on "Output" in order to see the real numbers as a table, but this is inconvenient. Here is an example of the number I'm referring to, in a chart. You see 15.9k and I'd like to see 15935.   ... View more

Use Case: As a user, I want to be able to share a dashboard with another user with the pre-selected filters so that they can see the same results as I do. Description: The current functionality of the dashboard filters is user-specific, meaning that each user has their own selected filters. However, there is a need to enable users to share a dashboard with another user, ensuring that the pre-selected filters are applied, allowing them to view the same results. This enhancement would allow a user to easily share a dashboard, including their filter selections, with another user. When the recipient accesses the shared dashboard, they would see the same filter settings as the original user, providing a consistent and synchronized view of the data. By enabling the ability to share dashboards with pre-selected filters, users can streamline collaboration, discussions, and decision-making processes. This feature enhances the dashboard-sharing experience and ensures that all parties involved are viewing the same data and insights. ... View more

With the "Jump to Dashboard" add-on installed & the "suppress _drill_" dashboard parameter configured, SiSense hides the _drill_ dashboards from everyone except the owner (which includes the sisenseadmin account).   As a result, it is hard for the administrator to view and/or manage _drill_ dashboards that are owned by a designer.   There is a workaround via F12 that SiSense showed me, but it's not intuitive.   It would be nice if there was a parameter to allow the sisenseadmin to always have the ability to see/edit the _drill_ dashboards (or perhaps that should be the default behavior). ... View more

Hi, for this moment we have such a behaviour: sum(NULL * 10) = NULL but SUM(NULL * [id]) = [id] in the same time if [id] have values (1,NULL) and we will do SUM([id]) = NULL Is it possible to add some toggle in the system how to work with NULL values. For example, if it is disabled it works as NULL is empty and SUM(NULL * [id]) = [id] But if it is enabled, so all NULL should be works as in mathematic SUM(NULL * [id]) = NULL etc ... View more

Currently, when you share a dashboard you can have it email the dashboard out to people following a couple different schedules: Every Elasticube update (with a limit on times per day) Daily (can specify which days and a time) Monthly (can specify which months and what day of the month) The trick is that elasticube updates includes failed updates.  I would like to add an option to exclude failed builds from triggering these dashboard update deliveries. Now that we have alerting for build failures, there doesn't seem to be a reason for dashboards to deliver without new information. ... View more

We embed and white label Sisense and our premium customers have the ability to author new dashboards with the formulas and attributes we provide. Our users want the ability to create new attributes, comparable to creating a new formulas. Examples: new "Northeast Location" attribute = existing location attribute that we provide where sites = A, B, C new "Shutdown 2023" = existing date field that we provide where date range between X and Y Concatenation of multiple fields to form a new attributes, comparable to Excel new "Is True" type attributes = existing attributes we expose if value(s) = ... Customers want the ability to create their own custom attribute, have then be added to the default values list, in their own "custom" section, where they can search and reuse their own creations. We are a multi-tenant solution provider so tenancy of these custom creation must stay "in tenant" and must do so with us implementing the multi-tenancy feature of Sisense (as we are already deployed and this is not yet robust enough for us to utilize) ... View more

A nice feature in Microsoft SQL Server is the ability to see multiple data sets from queries in stacked windows. Currently only one query can be executed at a time and only display that one query's data set. It would be nice to be able to compare data by having multiple data sets appear at the bottom. Currently I have to open multiple browser windows to compare values and it can get a bit busy. It would be nice to compare 2 or more queries in the same window. Select * from table 1 where id = 123 Select * from table 1 where id = 456 data set for id = 123 data set for id = 456 ... View more

A user would like to remove the title from the secondary indicator. Unchecking the Title box works for only the primary value. They would like the same functionality for the secondary. ... View more