Windows Sisense currently has no way for us as administrators to control how much ram is being used by elasticubes. From looking at the community site, it appears that linux has a way to do this through data groups, but when consulting with support, I have been told to increase our resources, simplify our models, etc.   The big problems that we have observed at my company is that 1. Sisense seems to take up the resources it is given - when ram is increased, usage percentage stays at the same level 2. If something does go wrong and resources begin to get consumed, there are no guard rails in place to stop whatever incident is happening from taking down the whole server This second case has happened only a few times in the years we have had Sisense, but I don't like that I have no way to be proactive about these issues.  ... View more

Our clients find that the sorting option is not available in Pivot widget, but it's available in Table widget; and on the other hand, we have available the "Drill into" and "Jump To Dashboard" features in Pivot widget, but it's not available in Table widget. That is why I suggest that we should have the feature to "Drill into" and "Jump To Dashboard" in Pivot widget, because that way we'll have all the functionalities needed to sort, drill into and jump to other dashboards in this Pivot widget. With Pivot widget you can drill and jump to: With Table widget it's not possible to drill and jump to:   ... View more

Hi Sisense Team, When the same widget is used in multiple reports, could it be possible that when updates are done to the widget in one report, these updates are automatically done in all other reports that contain the same widget? Thank you! ... View more

Hi - Is it possible or planned to allow Sisense Narratives to connect to a different LLM provider? We are hosted in AWS and have restrictions around data transmission, so would need to use an internally available provider such as Bedrock instead of Arria for NLG. ... View more

I want an option to remove the "Can Design" role when sharing dashboards (yaml? admin settings? does it already exist?). I dislike the role because: Users don't realise that they're editing a temporary copy, and that the owner can Republish to overwrite. They might make many changes, and then months later someone republishes the owner/master version. I'm not entirely sure if republish always overwrites - if the user has made changes, do they keep their version when you republish or get the new one? If they keep theirs, it makes it confusing when trying to make changes requested by a user, because you make a change, click republish, and then the user forgets to click the revert-to-master-button. Instead of the Designer Role, users can just duplicate the dashboard. That way, no risk of overwrite or confusion.   ... View more

Currently, when exporting CSVs, numerical values are wrapped in quotes. For example, if I had   Customer_1, "204.56" Customer_2, "34.89" the values "204.56" and "34.89" are wrapped in quotes even though they're numeric values. Please allow for exporting of CSVs without double-quotes. ... View more

Standard Live and Elasticube connector for AWS EMR: https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-connectors.html ... View more

When creating a new table in an Elasticube, the area to write code into takes up a fraction of the screen space. Please make the pop-up to write code for tables stretch across the whole screen so users can see more lines of code at once. Or make the pop-up window adjustable so we can move it to be as big as we like.  ... View more

We get requests to add full charts to a Pulse.  The option doesn't currently exist in the dropdown. ... View more

We use the SSO JWT option for Single Sign-on. In Single sign-on configuration, we specify the Remote Logout URL. We want a way to specify this remote logout URL at the user group level. ... View more

Please enable the possibility of selecting a default CSI (storage class interface)  from a set of existing CSIs so that it may be used as default Sisense persistent storage option. This is is a necessary feature for persistence of storage in cases such as autonomous cluster scaling or rebalancing, as well as disaster recovery.   ... View more

Some end-users have strict environmental and security constraints for their operations.  Please consider including M.I.T. Kerberos binaries and environment variable so that JDBC connectors could leverage Kerberos without having to access Kubernetes hosts machines. ... View more

Some end-users have several environments where they must provision Sisense and they strive to standardize and automate the processes as much as possible for efficiency. It would be great to be able to extend standardization and potential automation of configuration to the Helm Chart level: Please include some ways to enable feature or disable feature with the helm chart so that if we want to enable file management everywhere we could provide a value to all our helm charts so we can have uniform configuration. ... View more

When Highcharts is installed there is no option to choose what kind of scroll bar to use for a Widget. It would be nice if the designer could choose the Highcharts zoom bar or the regular scroll bar per Widget or Dashboard ... View more

Please add the ability to control widget zoom level via the Highcharts Navigator legend with the mouse wheel on Bar Chart type widgets via an option that can be enabled optionally. This would be similar to how map zoom can be controlled via the mouse wheel. ... View more

Currently a user can only have access to one tenant at a time. In my organisation we are only able to log into Sisense with an AD account, so users can only have one login each. All of our reporting and elasticubes are currently on the one original System tenant. I need to set up a second tenant to hold some highly confidential elasticubes and then be able to grant access to this tenant to a select few users, but with them still retaining access to the original system tenant. The current setup means these users would lose access to all of their other dashboards on the original tenant. ... View more

We propose adding a valuable feature to our dashboard UI: the ability to export a comprehensive list of all data models, including both Elasticubes and live models. This enhancement is essential for efficiently monitoring model changes before and after Sisense upgrades. Presently, this process involves manual actions like taking screenshots or exporting a text file using 'si' commands, but it lacks the capability to export live models and essential metadata such as data model type, owner, last modification date, last publication date, activity, and size. By introducing export functionality in formats like CSV, users will be equipped to easily track and compare models, quickly identifying any discrepancies or replacements. This improvement will significantly streamline model management and ensure seamless transitions during upgrades. ... View more

There are three features for BigQuery connections that would make your Edit Chart interface great. Show descriptions on the tables and fields: BigQuery supports adding a description to the fields and tables themselves. This information is often useful, and I find myself going to check the documentation on BigQuery consola in Google Cloud itself. We make use of this feature. Other databases also allow defining comments on tables and/or fields. It would be great to show them on the intervace via a tooltip when you put your mice over the field (right now is showing the type only) Display amount of data to be processed: one of the characteristics of BigQuery is that you pay by the amount of bytes you process. Building queries that are "efficient" is tricky task. Having a visual clue on the cost of the query allows me to understand better, before adding something in a dashboard or even running the query, how much data is going to consume. Also, if you tie that to the fact that I usually want to run the query using filters, and that there is no way for me to change filters in the editor, it makes my life miserable, because I need to copy the query, go to Google console, replace the generic filters [name=value] by real SQL filters, make a sense of the cost in SQL, etc... miserable experience. Show partitioned tables differently: For example, on Google Cloud BigQuery editor, partitioned tables are shown with a different icon than normal tables. Knowing if a table is partitioned, and knowing also which fields are the ones partitioned, would help to build efficient queries without leaving Sisense. Right now I find myself jumping in and out sisense. This takes time, and you are already showing all fields and tables in there, it would be great to just use a different icon for partitioned tables. That would be already helpful. Displaying the amount of data processed, to keep costs slim, would likely be the top thing (and Google does have API / command line in order to get the amount of bytes to be processed by a query). ... View more