In report manager, when trying to add recipients for email, we receive sisense user email id suggestions based on keyword entered. This can be confusing to users, as our end users send emails to external recipients(non sisense) and that email id suggestion is sisense internal user email. It will be really helpful if we can have a functionality to disable these email id suggestions from popping up in report manager, and avoid confusion to users.   ... View more

In dashboard filters we currently cannot add custom tool tip to filters. While using the dashboard, it will be helpful to add some tool tip description to the filter which may pop up by hovering around it or through some information icon. For example, if a user needs to use a custom filter, the JAQL syntax may not be intuitive. Using some tool tip, will help a user understand how to use the filter in a JAQL format. ... View more

Hi, Working on a dashboard containing 3 pivot tables. Each have a lot of columns. (see print screen attached). In order to have a proper PDF, I need to turn the page format to A0 / landscape When exporting to PDF at the Dashboard level (from the pdf button top right), I access to a PDF setup, where I can choose the layout (landscape) and the paper format (A0), so that all the columns appears properly. In this screen, there is a Save button so that the PDF setup is saved for next time (see print screen) When exporting to pdf at a widget level, the same setup otions are available (landscape and A0), BUT THERE IS NO SAVE BUTTON. I have to redo this setup each time (see print screen). Could we have the the Save button on the widget / PDF option page, same as we have ar the dashboard / pdf option page please ? Thank you ... View more

This is an "add on" request to this product request. Our customers need to be able to filter on datetime columns using a combination of both the date and the time. I'd like to see this added as a capability of filtering. For example, I'd like to filter records from "0800 yesterday to 0800 today". Or "0800 on Monday to 1700 Wednesday". Or "0800 4/1/23 to 0800 4/5/23". ... View more

When viewing a Dashboard, it is impossible to determine whether there are filters being applied at the widget level without opening each widget individually and reviewing whether (a) the inheriting of Dashboard-level filters has been disabled and/or (b) if additional and/or conflicting filters have been applied at the widget-level. This makes troubleshooting and/or viewing Dashboards very cumbersome. I'd like to see a simple visual flag from the Dashboard view indicating that "there is a filter applied within this widget". It doesn't need to display what that filter is -- only that there is (or is not) a filter within the widget. ... View more

Upon receiving the warning "Maximum number of series (50) exceeded", the warning does not reappear with a widget, dashboard, or page refresh. Instead, a filter change is required in order to trigger it again. IMO the warning should persist with refreshes and be visible every time due to the impact of the limitation being exceed - data is literally missing from the widget and the widget does not reflect the data set expected by the user.  To that end of being clear about the impact of having more series than the limitation allows, the warning would be best reworded to indicate that impact and avoid users making decisions on an uncontrolled subset of data. For example, "Results limited to maximum number of series (50)..." or "Data limited..." This limitation should also be documented in Sisense documentation, but is not currently. ... View more

The email schedules have a limitation when the file used in attachment is large in size. Most email servers have a 25mb max limit.  It would be really helpful, if there was an option to include a downloadable link in the email. When a user schedules an email, with the link option, the attachment is downloaded to a temporary path and the link to that path is provided in the email. Clicking on the link should download the file from the temporary path which can be an s3 bucket or from some server. We can keep a retention policy of few days for the files. ... View more

Within dashboards, the only way to know currently if there is a filter on a widget is to open that widget. This is VERY time consuming if there are multiple widgets within a dashboard (we sometimes have up to 10). Please add an icon at the top of widgets (near the pencil would be great). If the icon is grey, no widget level filter is set. If the icon is colored in, a filter is set. If a filter is set, mousing over the icon should return a preview of what the filter is. ... View more

Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

When we are building pivot tables, sometimes there is a need to sort things by the columns. If I want to show a pivot table with a Team Lead as the rows, Total Spend and Total Volume as the values, and Weeks as the the columns, I have no way to sort this to show the date in descending order and keep the table structure the way I want to see it. I think it would be helpful to have this option. ... View more

When using dependent filters and selecting new filter values this automatically resets all filter values already chosen.  Whilst this is desirable from a security perspective, not all models have security applied.  The proposition here is to have a toggle or similar that the designer/owner of the dashboard can use to turn this behavior on/off.  Thus the reset reasoning behind this can be maintained if required for that model or use case and the behavior can be turned off if non resetting is optimal for the use case needed. ... View more

NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Hi, I have issue with setting two date dimensions in dashboard. The goal I want to achieve is to have a history of records, which are also have it's own date dimension. You can download model and dashboard. I would like to have difference in growth ower selected period for defined dates. For example 2 days ago I sold a car for 1000, and yesterday the proce have changed to 1500. The sale date is for today. So the growth over 2 days is 1500, and for 1 day 500. Additionally i would like to compare those values to previous year, and go back with both date dimensions. Tricky part is also, that if there is not sale for this year, PastYear() wont count prior year. I tried to play around with filtered measure plugin, however it doesn't give me exactly what i want. Do you have any suggestions how can I approach such data and 2 date dimensions? Thanks 🙂 ... View more

We would like to be able to dynamically aggregate different categories of data into a fewer number of categories to make the visualization and analysis of that data cleaner and more Viewer-friendly. Example: I may have records of a color that I want to count on. I may have these possible values: "Red", "RED", "red", "Blue", "BLUE", "blue", "Orange", "ORANGE", "orange", and so on. If I COUNT on these values I may get: "Red": 10 "RED": 7 "red": 12 "Blue": 2 "BLUE": 7 "blue": 22 ...and so on.. I'm asking for aggregation feature that I, as a user, could define based on the values in these records such taht the data above could be represented as: "Red": 29 (i.e., 10 + 7 + 12) "Blue": 31 (i.e., 2 + 7 + 22) ... View more

Hi, Currently in the filters, we are unable to directly filter a comma separated list of entries. The options available are individually selecting the members, however that can get tedious if the list of entries we need to filter are large. For example, filter more than 100 entries. The other option is using the custom option in the filter. However, that too requires JAQL code which might be difficult for non technical users.  It can be useful to have the option to directly copy paste a comma separated list of entries in the filters instead of multiselecting or using the custom JAQL option.   ... View more

Currently, if we export the pivot as an excel/csv, there is no indication of the date range it was run for in the output file. It will be really helpful to have control on the exported output in excel or csv, such that we can include the date range of the result or other filters applied in the output. ... View more

Is there a way to add dynamic values inside of the text boxes that can be added to Dashboards? As far as I can tell, this is strictly static text. Maybe through scripting or something that is not obvious? If not -- this would be a useful feature to be able to link values to, for example, Dashboard filter values (records from "last 90 days" or "last 30 days") according to what has been configured. ... View more

The number of source of frustration and confusion amongst our users, when building Dashboards, is conflicts/inconsistencies between Dashboard and Widget filters. I have separately suggested that Sisense introduce a visual indicator of widget-level filters and it sounds like that is planned for the future, which is great. Another related feature that a user suggested was a "reset all widget filters" button which would be a single place at the Dashboard level. If the user clicks it, it forces all Widget filters to (a) be deleted (or maybe disabled?), and (b) puts the widget filter settings back in-sync with the dashboard (meaning if the user has selectively toggled off Dashboard filter inheritance at the widget level, that will revert back to the defaults). This is a really quick and easy method to put users back to square one if they have painted themselves into a corner, so to speak. ... View more

The list of our shared formulas can grow to be quite long.  We would like the ability to search within formulas, just as you can for attributes. ... View more