Would like an easy way to transfer ownership of objects to someone else.  Or for a super-user admin to be able to "take ownership" of a data model or dashboard.  Will make it easier to deal with when someone leaves the company and they owned things in Sisense. ... View more

It would be cool if our end users could receive a Digest Email that is sent out on a frequent basis from Sisense. This email would be most relevant if it was based on the groups a user is assigned to already. This would ensure relevant communication, as well as ensure there is control over the reports included in the digest that the user would already have access to them. We would not want the digest email to included recommended reports the user doesn't already have access to. If it was a feature the Admin could turn on/off at the group level that would be our preference. The feature would allow the Admin to select how often the digest went out (weekly, monthly, etc). The feature would allow the Admin to select what content was included: For example:  Changes, Top Used/Popular in the Users Groups (i.e. Org), and then for us I think Newly Published Reports would be ideal.  This would allow an organization to choose whether every time a new dashboard is released the user is notified, for us we would prefer a section in the digest that has these 3 dashboards were released to your group(s).  Other BI tools do already offer this-- Attached is an example of the Power BI digest, as reference. Thanks! ... View more

The Data Security tab's group/user assignment window currently has a max search limit of 20 results.   The "results" search limit should be configurable because we have approx. 50 groups that need to be assigned, & it is very difficult to find/assign/manage all of the groups when the search window does not return all of the appropriate results. ... View more

This idea aims to help on-premises installations or live connections to better control load. The scenario: we have a big amount of users using the Report Manager plug-in, and we cannot limit the number of reports they can create or even the minimum periodicity for their schedules. Currently any user will be able to create a big number of reports, and those reports in a worst case scenario could be sent every hour. It could case a high usage of server resources. It is possible to setup the number of concurrent reports that will be processed, but depending on the number of reports it could cause bottlenecks and big deliver delays. The idea: adding some new 'admin' settings to Report Manager plug-in: - Maximum number of reports per user: defines the maximum number of reports a unique user can create. We could use 0 for unlimited (current behavior). - Maximum number of reports per user group: defines the maximum number of reports a user group can create. Same ideia as the above, but related to user groups. It could be a unique setting for any user group, or maybe a map with specific limits for each user group. - Minimum periodicity for scheduling: currently Report Manager offers the hours, days, week and months options. For instance, if this setting is set to days, then users will not be able to select hours when creating new schedules. Current existing schedules could be kept. ... View more

When replacing a server, or testing an upgrade, we often find our clients taking a backup of their Sisense database and restoring it to another server. After updating the server identity in the mongodb, it's pretty much ready to go. However, use dashboards all reference the old server and have to be updated. This is a manual process that the users themselves one dashboard and data source at time. An administrator cannot easily do that work on their behalf. Acknowledging that there is a replace_datasource API call that allows you to apply a new server and data source to a single dashboard, I would love an easier a way to update just the server across all dashboards. ... View more

Hi, We are facing some issues in the hour timezone related to builds. There's no way to change the UTC setting for the build schedule. It's very confusing and it's generating many issues in timezones when there are changes in the hour due to summer/winter time adjustments. We tried to change the timezone in the upgrade process, but the build schedule only works in UTC. This is a nightmare for data administrators. We need to be able to set the local timezone as the build schedule setting.  Best ... View more

Currently when scheduling builds to run in intervals, you can choose for the builds to run once every X days, OR X hours, OR X minutes. https://docs.sisense.com/main/SisenseLinux/scheduling-builds.htm. It would be beneficial to: 1. Use Hours AND minutes so we can prevent builds scheduled for every one hour from colliding with another build on hourly (even if multiple hours) interval i.e. schedule one for every 1 hour, and one for every 4 hours and on the 4th hour they collide and prevent successful full build. 2. Allow specific scheduled time and multiple intervals i.e. start @ 7AM and repeat every hour for 6 hours, or start at x hr and repeat every x minutes.   ... View more

Hello, Currently the number of queries running in parallel during an EC build is set at the server level. With setting "Build / Base Table Max Threads" (4 by default). The optimised number of simultaneous queries is very much dependant on the context of the EC. For instance, an EC with 4 differents date source is more likely to accept a high number of simultaneous queries (spread over the 4 data sources), than an EC with only one data source. Therefore, I would like to suggest to make this setting per cube instead of at the server level. An alternative would be to have this setting at the Data Group level. Thank you and best regards, Franck   ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** User parameters must be set and cannot be used for dynamic customizations. When setting up data models, these parameters cannot be included as part of a filter in the underlying query. We would like a way to reference a global or system variable that includes the username of the currently logged in user. ... View more

Hi, For security reasons, one of the requirements we have seen in our customers are reltaed to the ablity to have more customized Admin roles. Some customers have different departments, that are responsible to manage the administration of some features independently. It's not fixed just with the Data Admin and the Admin. For example, some area needs to manage the Users and groups, but other area needs to manage the look&feel and white labeling, feature management... Now, an admin is a root user. And the Data Admin is restricted to Data Groups management.  Best! ... View more

Looking for a way to change the logo based on their corresponding theme. We can create themes for the different companies but there is no option for logo in the Theme and would like to capability to extend the white labeling past just 1 logo ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** Sisense doesn’t have an API to get data from the Sessions Table. This data is available in the UI only. We would like to be able to use this data in a custom application that we have built. We’d like to see an API that will allow us to get the Session Table details.   ... View more

Hi, Our CSMs/Marketing teams using downloaded PDFs as additional information to our customers. A need was raised to make the PDF generated more company branded, including the company logo (which includes in the platform).  It will be very valuable feature for a lot of internal users in the company.  ... View more

I would like to know which features of Sisense the users are using. Are they using Pulse? how much, in what ways? Which users have scheduled email reports (not the plugin)?  frequency, sending to self or others?  ... View more

We need a view that shows us which dashboards are dependent on which table in the datamodel. We want to remove some tables, but because we have many dashboards we don't know where exactly that table data is being used so it's very risky to change/delete tables. The depedency granularity of the data model is good but not enough. ... View more

Two problems: Datamodels store old connection information without the user being aware. That increases the chance of accidentally exposing credentials to a different security context. Sisense R&D said that the reason is to show Recent Sources. When you change a dataset, you can end up with two copies of the dataset, which is confusing.   Ideas for improvements (take some or all): Sisense could track the Recent Sources separately. Then Sisense could automatically remove empty datasets. Sisense could show empty datasets under Data Sources in the data model editor UI, and give the user a delete button for them. The Data Model editor could have a drag-and-drop to move tables between data sources. When you click export, there could be a checkbox "Remove data source connection information".   More detail about the problems here: https://community.sisense.com/t5/support-portal/bd-p/SupportPortal?page=casedetails&caseId=500Pk00000Es4PyIAJ and here:https://community.sisense.com/t5/help-and-how-to/models-have-empty-datasets/m-p/20632#M222   ... View more

We have a use case where we need a Viewer role to have the ability to import and share dashboards. The problem is that those elements are set to canBeOverridden: false. Please change share and import to canBeOverridden: true for the roles API. ... View more

Under an Admin Account and User Mgmt. it is not easily possible to sort the user role (ascending/decending) like it is with other columns.  License utilization is one thing, but being able to easily filter roles and reassign as needed would be a huge help ... View more

Hi, Actual access to Grafana monitoring tool is under Server & Hardware > System Management where are a Monitoring and Support option in the main Admin option.  It's not very intuitive now. Best ... View more