Make Query in Data Tab to be a link, so we could go back and forth

omerl20 · ‎01-07-2025

In Sisense, under the Data tab, there’s a queries tool that displays information such as a cube’s title, size, and status. However, creating a query does not update the page URL, so you cannot use your browser’s back and forward buttons to navigate to it. Omer London BigPanda

KirstenInovalon · ‎12-27-2024

We'd like to be able to annotate our bld pods using the helm provisioner. Annotation we're wanting to apply: karpenter.sh/do-not-disrupt: "true" Per Sisense support: "If we are discussing the -bld- pods, it’s important to note that their configuration cannot be overridden manually. These pods are dynamically generated by the Management service, and the logic for their creation and configuration is embedded within the Management service code. As such, direct modifications to their configuration are not supported."

daat · ‎12-23-2024

Currently, when we select the option to highlight in a widget data is, nevertheless, usually sliced in other widgets using different categories. Imagine we have three bar charts and a table, all of which are marked as HIGHLIGHT. Each widget and table contains a different category, this is the relevant part. I would like to be able to select a category in one of the widgets and be able to see all elements in the other widgets, but just highlighted. Currently, since these are different categories than the one selected, they are sliced. In attached image, I am selecting a category in the second widget but all the other widgets display sliced data, despite having selected highlight.

Bold_Sisense · ‎12-20-2024

Allow disable user accounts in Sisense, but we can only currently able delete users. Our use case involves keeping users in the system without utilizing a license.

mfahner · ‎11-13-2024

Support indicates that starting with version 1.11.25, a toggle was introduced to enable the sending of empty Excel files when using the Report Manager. Please implement the same feature with other file types. At the moment I am using CSV.

Tim · ‎10-15-2024

Jump To Dashboard add-in It lists dashboards with the _drill_ prefix. It lists only dashboards using the same datasource. I have a drill-down dashboard that uses two datasources: one that matches my parent dashboard, and one that shows more granular information. I'd like this drill-down dashboard to appear on the JTD list. I think the JTD list should show any dashboards that share at least one datasource with the parent.

omeron · ‎10-01-2024

There is no option to modify table columns width in notebook results. This means that if I query a dataset of accessed URLs, where the end of the line matters most I cannot see anything beyond the domain name. Optional workarounds are hovering row by row or exporting all results to CSV. Both are cumbersome. Modifying columns width seems to be a common notebook functionality in similar solutions, so it would be nice if Sisense could support this as well.

Tim · ‎09-29-2024

In my datamodel, I want to delete 10 tables with names ending with "MySpecialSuffix". So, I go to datamodel list view and search for "MySpecialSuffix". I click delete on the first table. But then it loses my filter. So I have to re-type my filter for each table I want to delete.

Tim · ‎09-23-2024

See here: https://community.sisense.com/t5/technical-troubleshooting/refresh-schema-error/m-p/23594#M195 Refresh Schema fails when you have tables from two different schemas.

angupta · ‎09-11-2024

When we send more than one Combined Excel Report while using a dashboard having different filters on it. Names of those combined Excel sheet we get from them is same as they were using same dashboard for creating a report, which is difficult to identify when downloaded simultaneously. Can we base the name of excel sheet on Report Name itself rather than dashboard name as it will be more convenient. Thanks, Animesh Gupta

wallingfordce · ‎08-08-2024

Create a pivot widget of RSUM( [Total Quantity] ) over time (rows) and break by (columns) age range. Scanning down each column, over rows, the numbers only increase. Now change it to a line widget. The break by defaults from an RSUM within columns in the pivot to an RSUM within rows in the line chart. This is the same as not having an RSUM and doing a stacked area. Our clients expect the line chart the results from changing the pivot to a line chart, to reflect the same output as the source pivot. As it stands now, they are surprised to see negative curvature in their RSUM, think something is broken, and open a support ticket. The default behavior should be to render Break by Columns instead of Rows. As an aside, I'm having trouble coming up with, and would be interested in hearing, use cases for charts with break by set to rows.

bminehart · ‎08-07-2024

The content/formatting/text contained in the various Sisense-generated/automated emails is currently static. I went through a long dialog with support and determined that it's not customizable by customers. I would like it if we could modify these emails, and I'd especially like to have access to dynamic variables that we can insert in the email body (or subject). User's first name or last name were specific for my use case, but having access to a variety of variable could be helpful.

lsher1 · ‎02-15-2024

When creating a new table in an Elasticube, the area to write code into takes up a fraction of the screen space. Please make the pop-up to write code for tables stretch across the whole screen so users can see more lines of code at once. Or make the pop-up window adjustable so we can move it to be as big as we like.

danblack · ‎01-30-2024

We get requests to add full charts to a Pulse. The option doesn't currently exist in the dropdown.

gdartigueeis · ‎11-16-2023

Please enable the possibility of selecting a default CSI (storage class interface) from a set of existing CSIs so that it may be used as default Sisense persistent storage option. This is is a necessary feature for persistence of storage in cases such as autonomous cluster scaling or rebalancing, as well as disaster recovery.

gdartigueeis · ‎11-13-2023

Some end-users have several environments where they must provision Sisense and they strive to standardize and automate the processes as much as possible for efficiency. It would be great to be able to extend standardization and potential automation of configuration to the Helm Chart level: Please include some ways to enable feature or disable feature with the helm chart so that if we want to enable file management everywhere we could provide a value to all our helm charts so we can have uniform configuration.

DRay · ‎10-30-2023

Please add the ability to control widget zoom level via the Highcharts Navigator legend with the mouse wheel on Bar Chart type widgets via an option that can be enabled optionally. This would be similar to how map zoom can be controlled via the mouse wheel.

pbrooksSDL · ‎10-20-2023

Currently a user can only have access to one tenant at a time. In my organisation we are only able to log into Sisense with an AD account, so users can only have one login each. All of our reporting and elasticubes are currently on the one original System tenant. I need to set up a second tenant to hold some highly confidential elasticubes and then be able to grant access to this tenant to a select few users, but with them still retaining access to the original system tenant. The current setup means these users would lose access to all of their other dashboards on the original tenant.

sumana · ‎10-12-2023

We propose adding a valuable feature to our dashboard UI: the ability to export a comprehensive list of all data models, including both Elasticubes and live models. This enhancement is essential for efficiently monitoring model changes before and after Sisense upgrades. Presently, this process involves manual actions like taking screenshots or exporting a text file using 'si' commands, but it lacks the capability to export live models and essential metadata such as data model type, owner, last modification date, last publication date, activity, and size. By introducing export functionality in formats like CSV, users will be equipped to easily track and compare models, quickly identifying any discrepancies or replacements. This improvement will significantly streamline model management and ensure seamless transitions during upgrades.

pausan-gh · ‎09-22-2023

There are three features for BigQuery connections that would make your Edit Chart interface great. Show descriptions on the tables and fields: BigQuery supports adding a description to the fields and tables themselves. This information is often useful, and I find myself going to check the documentation on BigQuery consola in Google Cloud itself. We make use of this feature. Other databases also allow defining comments on tables and/or fields. It would be great to show them on the intervace via a tooltip when you put your mice over the field (right now is showing the type only) Display amount of data to be processed: one of the characteristics of BigQuery is that you pay by the amount of bytes you process. Building queries that are "efficient" is tricky task. Having a visual clue on the cost of the query allows me to understand better, before adding something in a dashboard or even running the query, how much data is going to consume. Also, if you tie that to the fact that I usually want to run the query using filters, and that there is no way for me to change filters in the editor, it makes my life miserable, because I need to copy the query, go to Google console, replace the generic filters [name=value] by real SQL filters, make a sense of the cost in SQL, etc... miserable experience. Show partitioned tables differently: For example, on Google Cloud BigQuery editor, partitioned tables are shown with a different icon than normal tables. Knowing if a table is partitioned, and knowing also which fields are the ones partitioned, would help to build efficient queries without leaving Sisense. Right now I find myself jumping in and out sisense. This takes time, and you are already showing all fields and tables in there, it would be great to just use a different icon for partitioned tables. That would be already helpful. Displaying the amount of data processed, to keep costs slim, would likely be the top thing (and Google does have API / command line in order to get the amount of bytes to be processed by a query).

Sisense Community

Make Query in Data Tab to be a link, so we could go back and forth

Bld Pod Annotation

When highlight is marked in a widget, data should not be sliced - regardless of filters applied

Allow feature to disable users

Report Manager - don't send if no results

JTD include dashboards with multiple sources

Allow modifying columns width in notebook results

When viewing a datamodel as list remember filter after deleting a table

Refresh Schema bugfix

Naming Convention of Combined sheet sent via Report Manager with Filters on it.

Default Break By behavior should be Rows instead of Columns

customize automated email templates

Elasticube SQL Area

Full Charts in a Pulse

Selection of default CSI for Persistent Storage

Helm Charts - Flexibility of features

Use scroll bar with Highcharts

User able to log into more than one tenant

Feature to export all datamodels from UI

BigQuery connection improvements when Editing Charts (descriptions, bytes to process, partitioned)