NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Ability to sort the items of a filter by a secondary item. Currently. for days of the week, for example, they will naturally be displayed in alphabetical order. Instead of "Mon, Tue, Wed, Thu, Fri, Sat, Sun". Sisense is only capable of displaying it as "Fri, Mon, Sat, Sun, Thu, Tue, Wed". ... View more

It's great that in the formula editor one can add as much empty space as one likes to make the code as readable as possible... spaces, returns, blank lines, etc. Also great that fields in the formula editor can be renamed from what they are in the data browser to detail, for example, how a field is filtered. We can also hack that feature to add in a [Value]*0 as a comment. Still, revisiting big formulas is time consuming because of the lack of code comments. One can create an external repository that includes comments, but formulas cannot be copied and pasted from an external repository into the formula editor, making an external solution not much more helpful. So having a way of commenting in the formula editor, or a way to store formula code somewhere else that allows for commenting that also allows for easy update in Sisense when the code changes in the external repo.   ... View more

It would be interesting to be able to modify livenessProbe and readinessProbe values in Sisense Provisioner's Helm charts (chart.png).   Currently, the values are hardcoded in the deployment charts. It is therefore not possible for us to change the values using a value file (configuration.png). ... View more

Idea: usage analytics reports can tell what reports use a certain field? Filter by a certain field in the usage analytics report and you will see all dashboards using that field.  It would also be beneficial to track table usage in dashboards too.  Use Case: region will be renamed to region_usa in our sql query and this could potentially break dashboards. to be proactive, i would like to know what dashboards are currently using the field 'region' so that I can redirect them to the correct field, 'region_usa' once the sisense schema & sql has been updated. ... View more

Recently, we were trying to create a widget using the RPAVG function for a rolling 30-day average, which broke our connection to the live model while working (to an extent) on an elasticube. The function worked past the first 30 days on the elasticube, while the first thirty days were (SUM N )/ N. This formula works past those thirty days, but for the first value, for example, gives simply the first value.  A new version of these functions would be greatly appreciated.  ... View more

People sometimes build bad data models. Rather than them doing more training (or asking me to help), you could build a tool that points out common problems. The user would click a button, wait a minute or so, and then get a list of potential problems and suggested changes. The tool would describe an example using their data that they can use to prove the problem (e.g. "filter a widget by Location and Date and then you see it's double counting the Dollars field"); that would be more motivating than an abstract argument. Not only can they debug themselves, doing so will be better than training for teaching them to design better data models. Here are my ideas for issues to look for. They might not always indicate a problem, but you can point them out for the user to decide. Do they use a convention for distinguishing Fact and Dim tables? Typically "fact" and "dim" prefixes for table names. Does any widget use a dim-table field in an aggregation in a Values pane formulas? Does any widget use a fact-table field in a non-values pane, or as a members filter in a formula? Do any dim-tables join to a fact-table via another fact-table? Does any pair of tables have multiple relationship paths of the shortest length? (Should be only one short path and it shouldn't include a fact table, but there might be several longer ones via other fact tables.) Any many-to-many relationships? Sometimes this is intentional and the user is meant to select a single item from a dim-table, so maybe ignore it if all uses in widgets filter one side of the relationship. ... View more

It would be great if we were able to setup Active Directory for an individual tenant while having SSO enabled for another tenant. This would help us differentiate between our external customer facing and internal BI. ... View more

Currently, the Area Map widget only offers two map types: World and USA. This becomes problematic if your data is limited to a specific country (Indonesia, in my case), and you only want to display that country on the map. I've managed to filter for Indonesia using the following code: ...res.geoJson.features.filter(feature => feature.properties.name === 'Indonesia'), However, this approach leads to another issue: when the dashboard loads, the Indonesian area is too small, and I have to manually zoom in. I would greatly appreciate any code or method to set the widget to automatically zoom into the Indonesian region when displayed on the dashboard. ... View more

Bug Click Edit on a dashboard filter that is near the bottom of the screen. The edit filter dialog pops up, but the OK button is off the bottom so you can't click it. Scrolling doesn't help. The only way to fix is it to reposition the filter so there are other filters beneath it (but then those get that problem). Applies to Sisense Windows 20.24.3.10115. In Sisense Linux, the edit filter dialog positions itself in a way shows the OK/Apply button even if you clicked on a filter at the bottom of the screen. ... View more

For some reason when editing a Pivot for example you can get 3 options for sorting on the "rows" - DESC, ASC, and No Sort  However when using the sort in the Pivot table itself - there is only DESC and ASC order. Could you please add the "No Sort" option to the widget too? ... View more

Instead of having to manually set the same format for each date type over and over, it would be nice if you could set defaults for each date type (Year, Quarter, Month, Week, Day) somewhere and have everything default to that with the ability to change away from the default if needed.  This could be done in the same area we set First Day of Week and Fiscal Year for the server. ... View more

Currently the values that get displayed in a "text" based dashboard filter is sorted by default in ascending order. This is ok for most cases. But for certain cases (e.g. date as text) - we wish to showcase values in descending order. Hence, the feature request for allowing sorting in dashboard filters. ... View more

1. View all history of builds and its corresponding logs from the cubes. Because, I could not see the last build failure reason, if another build got started. I need to wait for another build to complete or fail. 2. View all history of changes and provide a way to revert as in Google docs for both the cubes and dashboards. Some times, if something went wrong, we should just be able to revert to the previous version and continue from there. 3. Provide a way to view the list of cubes in the queue waiting for the build. Also, allow remove or disable them for a period or rearrange the queue to build. This will help in prioritizing something manual on demand. 4. If a cube build fails due to the memory or other configurations issue, provide suggestions like what has to be changed and based on what before triggering another build. 5. Provide a page to derive the suggested the configurations like memory, cpu, timeouts etc by collecting details like 1. Number of cubes, 2. average cube size, max cube size, min cube size, or number of cubes by size range say <5g, <10G, <20G, <40G etc.., 3. Frequency of the build per cube etc.. 6. Provide a page to view all the slow running dashboards, slow running queries and some suggestions to improve it. 7. Some times, if a dashboard got changed and republished, it is not getting applied to all the users. Provide a way to view the version of the dashboard the user may view. 8. Between builds, if there is not much change in the data, Sisense build should go faster. Provide a way like one common place to build each table from other sources individually and keep it ready. From there, if we build say functional cubes, it should build in flashing fast using the locally stored data. I see the cubes are pulling the data faster from relational db but very slow from mongodb. Now, if we are pulling data from another sisense cube or from the source no big performance difference. 9. Also, I am not sure, if we are restarting the nodes, should we necessarily mark the cubes in queue as failed, instead adding back to the queue as it was before the restart and just marking the actual cube got failed should be good enough. More later .. Thanks, Muthusamy J ... View more

I think table and custom table usage should be added to the scope of usage analytics. I have large data sources that have been around for many years. Often dashboards are unused (which I can currently track with usage analytics) and can be deleted or archived. But the data that drives them is much harder to keep track of. I have no way of knowing which tables are used in dashboards and which ones could be removed. This is especially true for custom tables that eat up build time and might not be used at all. ... View more

While it is possible to Lock a filter so that users can't change it, sometimes they get confused by the presence of that filter and want to try to change it, which results in a support call to us.  There could also be times when the filter criteria itself is sensitive. We should be able to right-click on a filter and choose "Hide from Viewers". This would also have the benefit of cleaning up the user interface a bit, so viewers don't have to wade through criteria that they can't control anyway. ... View more

Currently File management on Sisense UI under App Configuration shows only storage data. It would be very helpful if various logs can be configured and accessed from file management tab without needing to login to server. Especially in production when there is a need to get the logs for any issue developer has to raise a request with the production support team and wait for their approvals. It would take more than a day to get the files. There is Generate support file option but that is too huge and combines all the logs. ... View more

At the moment, the usage analytics functionality is only available for the system tenant. You can monitor activity across all tenants from there. However, this means that you cannot share usage analytics data with designers within the self-contained tenant. ... View more

Currently Embed SDK doesn't provide a function to perform the same function as clicking Restore my default filters button in dashboard filter. It would be great to add it in the future. ... View more