We are OEM with several hundred client organizations, each of whom have their own set of our standard data models. The data sources are prefixed with a client code so that the same data model can be distinguished and secured between clients. Have two sets of the same data models with different data.  Have two users, each with access to only one of the two sets of data models. One user creates a dashboard that uses multiple data sources. The dashboard is export to .dash file and shared to the other user who imports it. The second user then needs to update the dashboard data sources to see the dashboard render with their data. Importing that dashboard into Windows and updating the data sources: 2DSDashImportWindows.mp4 Just update the data sources at the dashboard level. Importing that dashboard into Linux and updating the data sources: 2DSDashImportLinux.mp4 Update one data source at the dashboard level. Then update each widget in the dashboard to use that data source. Then update the other data source at the dashboard level. Then update each widget in the dashboard to use that data source. How many widgets in your dashboards 😉 ... View more

While downloading a large csv/excel file (over several hundreds mb file) from the widget, there would be a long delay of couple minutes before the browser indicates the file has been downloaded. During this time, the user has no indication if the request to download is in process or has failed. It would be good to have an indicator to show the download of the file is in progress, so user would not click the download multiple times thus causing multiple queries to hit the backend.   ... View more

In addition to not being able type in dates with the Calendar item in the date filter (I submitted that as a separate idea to be able to type in dates), the general date selecting user experience is quite cumbersome.  It's hard to write this out and much easier to show.  But the short story is that it is difficult to select the dates on the first try.  A pretty typical interaction with the calendar component goes something like this: Open the filter Select Calendar Pick the start date Perform however many clicks it takes to get to the date you need (sometimes this can take a few clicks if you are going back a few years/months) At this point you think you have selected the start date Now, move your cursor to go select the end date At this point, the start date loses your initial selection.  I think this happens 90% of the time Sometimes the issue is that the start date gets set to the new end date Sometimes it resets before you even get to the start date Sometimes it goes back "Select" like you never picked a date This behavior is quite frustrating.  I have experienced it quite a bit myself and customers have complained.  I hope there is something that can be done to improve it. ... View more

It is currently possible to add a second axis, but we would like to expand this capability to have more axes on a chart or line chart with Compose SDK. Data visualizations are becoming more advanced and to match our competitors, we would like to have this capability to build a chart where users can select and display multiple measures on one chart. For our future dashboard, we plan to have a longer list of KPI measures that users can select from to ensure a customizable and interactive experience. ... View more

Idea: usage analytics reports can tell what reports use a certain field? Filter by a certain field in the usage analytics report and you will see all dashboards using that field.  It would also be beneficial to track table usage in dashboards too.  Use Case: region will be renamed to region_usa in our sql query and this could potentially break dashboards. to be proactive, i would like to know what dashboards are currently using the field 'region' so that I can redirect them to the correct field, 'region_usa' once the sisense schema & sql has been updated. ... View more

Our users often ask about concatenating strings contained in two separate columns as a calculated column in pivot tables. Although this is possible at the data model layer, it is not possible at the dashboard layer. We do not expose data model design and administration to our end users. Would be very helpful for Sisense to introduce this functionality. ... View more

It's great that in the formula editor one can add as much empty space as one likes to make the code as readable as possible... spaces, returns, blank lines, etc. Also great that fields in the formula editor can be renamed from what they are in the data browser to detail, for example, how a field is filtered. We can also hack that feature to add in a [Value]*0 as a comment. Still, revisiting big formulas is time consuming because of the lack of code comments. One can create an external repository that includes comments, but formulas cannot be copied and pasted from an external repository into the formula editor, making an external solution not much more helpful. So having a way of commenting in the formula editor, or a way to store formula code somewhere else that allows for commenting that also allows for easy update in Sisense when the code changes in the external repo.   ... View more

While it is possible to Lock a filter so that users can't change it, sometimes they get confused by the presence of that filter and want to try to change it, which results in a support call to us.  There could also be times when the filter criteria itself is sensitive. We should be able to right-click on a filter and choose "Hide from Viewers". This would also have the benefit of cleaning up the user interface a bit, so viewers don't have to wade through criteria that they can't control anyway. ... View more

Recently, we were trying to create a widget using the RPAVG function for a rolling 30-day average, which broke our connection to the live model while working (to an extent) on an elasticube. The function worked past the first 30 days on the elasticube, while the first thirty days were (SUM N )/ N. This formula works past those thirty days, but for the first value, for example, gives simply the first value.  A new version of these functions would be greatly appreciated.  ... View more

As an admin, have an option at the top of a dashboard to be able to view it as another specific user.  For example, if user John Smith is set under the data security on a cube to only have access to rows for a certain region, the ability to view a dashboard as John Smith would make checking user access very easy. ... View more

It would be helpful to choose where on a dashboard to add a new widget rather than it only being added to the bottom of the dashboard. ... View more

1. View all history of builds and its corresponding logs from the cubes. Because, I could not see the last build failure reason, if another build got started. I need to wait for another build to complete or fail. 2. View all history of changes and provide a way to revert as in Google docs for both the cubes and dashboards. Some times, if something went wrong, we should just be able to revert to the previous version and continue from there. 3. Provide a way to view the list of cubes in the queue waiting for the build. Also, allow remove or disable them for a period or rearrange the queue to build. This will help in prioritizing something manual on demand. 4. If a cube build fails due to the memory or other configurations issue, provide suggestions like what has to be changed and based on what before triggering another build. 5. Provide a page to derive the suggested the configurations like memory, cpu, timeouts etc by collecting details like 1. Number of cubes, 2. average cube size, max cube size, min cube size, or number of cubes by size range say <5g, <10G, <20G, <40G etc.., 3. Frequency of the build per cube etc.. 6. Provide a page to view all the slow running dashboards, slow running queries and some suggestions to improve it. 7. Some times, if a dashboard got changed and republished, it is not getting applied to all the users. Provide a way to view the version of the dashboard the user may view. 8. Between builds, if there is not much change in the data, Sisense build should go faster. Provide a way like one common place to build each table from other sources individually and keep it ready. From there, if we build say functional cubes, it should build in flashing fast using the locally stored data. I see the cubes are pulling the data faster from relational db but very slow from mongodb. Now, if we are pulling data from another sisense cube or from the source no big performance difference. 9. Also, I am not sure, if we are restarting the nodes, should we necessarily mark the cubes in queue as failed, instead adding back to the queue as it was before the restart and just marking the actual cube got failed should be good enough. More later .. Thanks, Muthusamy J ... View more

Instead of having to manually set the same format for each date type over and over, it would be nice if you could set defaults for each date type (Year, Quarter, Month, Week, Day) somewhere and have everything default to that with the ability to change away from the default if needed.  This could be done in the same area we set First Day of Week and Fiscal Year for the server. ... View more

Currently the values that get displayed in a "text" based dashboard filter is sorted by default in ascending order. This is ok for most cases. But for certain cases (e.g. date as text) - we wish to showcase values in descending order. Hence, the feature request for allowing sorting in dashboard filters. ... View more

While using the calendar date range in a filter, you should be able to type in the to and from date.  The old style filters allowed that option.  We recently switched to the "new" style (I say "new" because they are only new to us ... I think they have been available in the product for a long time).  In the new style you have to use your mouse to pick the date on a calendar, you can't type it in.   ... View more

Ability to sort the items of a filter by a secondary item. Currently. for days of the week, for example, they will naturally be displayed in alphabetical order. Instead of "Mon, Tue, Wed, Thu, Fri, Sat, Sun". Sisense is only capable of displaying it as "Fri, Mon, Sat, Sun, Thu, Tue, Wed". ... View more

In browsers, usually links can be right-clicked. You get a menu including "Open in new tab" and "Copy link". Some Sisense links block this behaviour: e.g. the list of dashboards and jump-to-dashboard links. It'd be nice to get it back. To be clear: I do not want every link to open in a new tab. That would be annoying. I just want the option to do so. For example, here's a link where the right-click does work:   ... View more

We have created many folders (and subfolders) to help us organize our dashboards. It is currently very cumbersome to share folder access and ownership, which must be done for every dashboard within the folders. It would be nice if there were an easy (and native) way to share access to a folder and every dashboard within it, or to change ownership of a folder. ... View more

Hello Everyone! There are a lot of Ideas around improving the ability to format the text in Widgets. We appreciate all the feedback! In order to make it easer for people to find and contribute to the discussion, I am combining them into this thread. Everyone, what are the customizations that you would like to see in the GUI rather than using a script? One of the ways we prioritize development efforts is by community interest. I encourage everyone to vote and comment on this suggestion and its comments. The more engagement a request receives, the higher the likelihood of it being considered for implementation. Thank you for participating, and we are excited to work with you to make a better Sisense! Have a great day! ... View more