When using Starred Filters, end uses can create their own filter and save the selection for repeat use. However, any Starred Filter created will be visible to all users regardless of their Group or Parameter assignment. This is because these items are stored in the Data Browser as additional elements linked only to the data source and not to a user or group. As a result, this causes confusion, lack of control where one end users Starred Filters can be removed by another and concerns about data security. Appreciate utilising multitenancy would be a solution, however, this is not possible in all circumstances and requires a significant amount of additional administration.  I am recommending a functionality change to control / limit the visibility of Starred Filters to the User or Group that created them.  ... View more

Allow users to customize and set their preferred date format across the entire application interface. This feature would enable the seamless adjustment of date displays to match regional or personal preferences (e.g., MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD), ensuring a consistent and user-friendly experience. Admin will have the ability to select their desired format once, and the change will be reflected globally across dashboards, tables, and all date-related elements of the UI. ... View more

Our users often ask about concatenating strings contained in two separate columns as a calculated column in pivot tables. Although this is possible at the data model layer, it is not possible at the dashboard layer. We do not expose data model design and administration to our end users. Would be very helpful for Sisense to introduce this functionality. ... View more

Suggestion for improving subscribed dashboards: Include the date/time of the last cube build in subscribed dashboard emails.  Currently, we see the date/time per the settings configured in the subscription. We'd like to also see the date/time that shows when the data was pulled, or the "as-of". If there is a discrepancy in data, or if/when we need to trace back and review platform data changes, or if changes are made after the subscribed reports that may be important to call out to shared dashboard subscription recipients.  Thank you! ... View more

Currently, when we select the option to highlight in a widget data is, nevertheless, usually sliced in other widgets using different categories. Imagine we have three bar charts and a table, all of which are marked as HIGHLIGHT. Each widget and table contains a different category, this is the relevant part. I would like to be able to select a category in one of the widgets and be able to see all elements in the other widgets, but just highlighted. Currently, since these are different categories than the one selected, they are sliced. In attached image, I am selecting a category in the second widget but all the other widgets display sliced data, despite having selected highlight.   ... View more

It would be great if Sisense would allow to sort a table/pivot by multiple values, combining ASC and/or DESC and indicating the sequence for sorting, e.g. by Field 1 ASC, then Field 2 DESC, etc. For instance, I am attaching an example with two values, so that I could sort based on % Compliance first and then by # Assignments, both in descending order. Additionally, it would be great to sort a table/pivot based on a field/value not displayed in the table/pivot. Currently, we need to use a script to hide that particular column. ... View more

While using the calendar date range in a filter, you should be able to type in the to and from date.  The old style filters allowed that option.  We recently switched to the "new" style (I say "new" because they are only new to us ... I think they have been available in the product for a long time).  In the new style you have to use your mouse to pick the date on a calendar, you can't type it in.   ... View more

We create filters on certain records that have long names, sometimes with similar names.  The current width of the filter panel cuts off these record names and makes it difficult to find the correct record(s) to select. We suggest either making the filter panel size-able, or possibly at least wrapping the name. ... View more

In report manager, when trying to add recipients for email, we receive sisense user email id suggestions based on keyword entered. This can be confusing to users, as our end users send emails to external recipients(non sisense) and that email id suggestion is sisense internal user email. It will be really helpful if we can have a functionality to disable these email id suggestions from popping up in report manager, and avoid confusion to users.   ... View more

In dashboard filters we currently cannot add custom tool tip to filters. While using the dashboard, it will be helpful to add some tool tip description to the filter which may pop up by hovering around it or through some information icon. For example, if a user needs to use a custom filter, the JAQL syntax may not be intuitive. Using some tool tip, will help a user understand how to use the filter in a JAQL format. ... View more

When we are building pivot tables, sometimes there is a need to sort things by the columns. If I want to show a pivot table with a Team Lead as the rows, Total Spend and Total Volume as the values, and Weeks as the the columns, I have no way to sort this to show the date in descending order and keep the table structure the way I want to see it. I think it would be helpful to have this option. ... View more

When using dependent filters and selecting new filter values this automatically resets all filter values already chosen.  Whilst this is desirable from a security perspective, not all models have security applied.  The proposition here is to have a toggle or similar that the designer/owner of the dashboard can use to turn this behavior on/off.  Thus the reset reasoning behind this can be maintained if required for that model or use case and the behavior can be turned off if non resetting is optimal for the use case needed. ... View more

NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Hi, I have issue with setting two date dimensions in dashboard. The goal I want to achieve is to have a history of records, which are also have it's own date dimension. You can download model and dashboard. I would like to have difference in growth ower selected period for defined dates. For example 2 days ago I sold a car for 1000, and yesterday the proce have changed to 1500. The sale date is for today. So the growth over 2 days is 1500, and for 1 day 500. Additionally i would like to compare those values to previous year, and go back with both date dimensions. Tricky part is also, that if there is not sale for this year, PastYear() wont count prior year. I tried to play around with filtered measure plugin, however it doesn't give me exactly what i want. Do you have any suggestions how can I approach such data and 2 date dimensions? Thanks 🙂 ... View more

It's great that in the formula editor one can add as much empty space as one likes to make the code as readable as possible... spaces, returns, blank lines, etc. Also great that fields in the formula editor can be renamed from what they are in the data browser to detail, for example, how a field is filtered. We can also hack that feature to add in a [Value]*0 as a comment. Still, revisiting big formulas is time consuming because of the lack of code comments. One can create an external repository that includes comments, but formulas cannot be copied and pasted from an external repository into the formula editor, making an external solution not much more helpful. So having a way of commenting in the formula editor, or a way to store formula code somewhere else that allows for commenting that also allows for easy update in Sisense when the code changes in the external repo.   ... View more

Currently, the Area Map widget only offers two map types: World and USA. This becomes problematic if your data is limited to a specific country (Indonesia, in my case), and you only want to display that country on the map. I've managed to filter for Indonesia using the following code: ...res.geoJson.features.filter(feature => feature.properties.name === 'Indonesia'), However, this approach leads to another issue: when the dashboard loads, the Indonesian area is too small, and I have to manually zoom in. I would greatly appreciate any code or method to set the widget to automatically zoom into the Indonesian region when displayed on the dashboard. ... View more

Currently Embed SDK doesn't provide a function to perform the same function as clicking Restore my default filters button in dashboard filter. It would be great to add it in the future. ... View more

Hello, On PDFs previews there is different mechanism of showing dashboard. Basically there is now possibility to register any events such 'widgetbeforequery'. Which can lead to incorrect views. The idea here is simple, to add possibility to register and run events on PDF previews. ... View more

We use jump to dashboard to allow users to view a data table to give them context to the chart they are looking at. For large data sets, this can lead to millions of records. The issue comes up when users try to then export this table. It would be nice if there was a way to set a hard limit to the number of records returned in a table/table with aggregation. When users try to download too large of a table, it impacts server performance for everyone, and the only way to really limit the tables right now and still allow them to be filterable on all required fields is not efficient (rank filter on a semi-unique identifier using the max of a unique identifier). I am looking to place simple guard rails into how much data can be exported into one file, I am flexible as to where this option presents itself and how - either a count of max records or a file size works. Having an option to set the max number of records returned in this widget type also would work. I would be fine with this as an option buried in the configuration settings page or within the admin page itself. I just want the option present somewhere. ... View more