Currently, dynamicElastiCube supports multi-model dashboards by indicating in the config at a widget level which data source to point to. However, there is no setting to do the same for dashboard filters. Thus, all dashboard filters will point to the "primary" elasticube when routing. This breaks any filter associated with models other than the primary one. ... View more

Hi, Working on a dashboard containing 3 pivot tables. Each have a lot of columns. (see print screen attached). In order to have a proper PDF, I need to turn the page format to A0 / landscape When exporting to PDF at the Dashboard level (from the pdf button top right), I access to a PDF setup, where I can choose the layout (landscape) and the paper format (A0), so that all the columns appears properly. In this screen, there is a Save button so that the PDF setup is saved for next time (see print screen) When exporting to pdf at a widget level, the same setup otions are available (landscape and A0), BUT THERE IS NO SAVE BUTTON. I have to redo this setup each time (see print screen). Could we have the the Save button on the widget / PDF option page, same as we have ar the dashboard / pdf option page please ? Thank you ... View more

After using the following property in customize JTD widget script for Pivot widget, JTD is enabled for all rows.  drillToDashboardNavigateTypePivot: 1 It would be great if we have an option of enabling JTD for specific rows.  For example, we are having 4 rows and 2 value columns in the pivot but want to have JTD linked to only "row2" and have that "row2" data passing to JTD as filter (as shown in the picture). NOTE: Customize JTD widget script referenced from Official Sisense documentation: https://www.sisense.com/marketplace/jump-to-dashboard/  ... View more

Our customers want to use the same data field twice within a filter. For example, within the field primary impression we want to include "seizure" and exclude the value "pyschiatric/behavioral problem". Is this kind of functionality on the roadmap, or can we have it added? ... View more

It would be cool if our end users could receive a Digest Email that is sent out on a frequent basis from Sisense. This email would be most relevant if it was based on the groups a user is assigned to already. This would ensure relevant communication, as well as ensure there is control over the reports included in the digest that the user would already have access to them. We would not want the digest email to included recommended reports the user doesn't already have access to. If it was a feature the Admin could turn on/off at the group level that would be our preference. The feature would allow the Admin to select how often the digest went out (weekly, monthly, etc). The feature would allow the Admin to select what content was included: For example:  Changes, Top Used/Popular in the Users Groups (i.e. Org), and then for us I think Newly Published Reports would be ideal.  This would allow an organization to choose whether every time a new dashboard is released the user is notified, for us we would prefer a section in the digest that has these 3 dashboards were released to your group(s).  Other BI tools do already offer this-- Attached is an example of the Power BI digest, as reference. Thanks! ... View more

The behaviour of the From/To date component appears to be causing a lot of confusion new users - we have had multiple reports mis-selecting dates and/or thinking this is a problem with Sisense.   The problem appears to stem from the way the focus is automatically shifted to speed up input of the 'To' date. This is not expected by new users and causes confusion. When a date is selected in the 'From' box... If no date set in the 'To' box, move focus to 'To' box and allow the user to immediately select the 'To' Date If date already set in 'To' box, do nothing. So, the first time you set the date range the first click sets the 'From' date, and you can immediately set a 'To' date with a second click. This is handy, but at the same time confusing if you don't realise what it's doing, and in practice is causing complaints. ... View more

We currently have SSO enabled for our product development but we also have internal users who need to reset their password once in a while for personal or security reasons.  But the current behaviour is "if you have SSO enabled, users won't receive an email when they click forget password and only admins can reset their password instead". This is very troublesome and if you have a large organisations with hundreds of internal users, it is very difficult for the admins to manage that expectation.  Would really like to get some help from the dev team and allow "forget password" even when SSO is enabled!  ... View more

Goal Enable dynamic alerting based on history using formulas Enable reuse of conditional coloring rules for pulse threshold  Background Pulse allows you to trigger off of a threshold (e.g. > 10,000, <= 10) Conditional Coloring of widget values allows for functions (e.g. Min([Months in Date], [# of unique Transactions]) Perhaps the Automatic anomaly detection does this, but we have no visibility into what is results in an anomaly.  Also not sure if you have to wait for the anomaly detection to learn. e.g. the cube has been built every day for years and has years of data, but the widget was only created a couple weeks ago and the pulse alert was added yesterday.  Will it detect anomalies or out of bound conditions that we could write with a formula Desired Functionality Enable use of functions in Pulse thresholds similar to Conditional Coloring of widget values Ideally enable reference to the Conditional coloring options for the widget.  The dashboard designer already built it into the dashboard. The user just wants a pulse alert when the widget turns RED.  Provide means of selecting from existing conditional coloring rules (Whether they are static values or forumlas) when building/editing the Pulse tile. ... View more

We find our clients sometimes using the widget information (i) button to provide their users with context for a widget. Their users sometimes click the button in search of information even when the designers haven't added any text to the widget information button. It would be helpful for end users to have a way of knowing before clicking that the widget information does or doesn't have additional information about the widget. ... View more

---Summary:--- When you jump to dashboard, your dashboard filters are carried over to the destination. I want to also carry any Drill Into breadcrumbs. ---Example / use case--- I right-click on a FieldA row in my PivotTable and drill it down to FieldB. Then I click on a number to Jump To Dashboard. The destination filters for the FieldB row I clicked on, but it doesn't filter FieldA. That's fine when FieldB.value occurs only as a child of FieldA.value. But some of my FieldB items are repeated in several FieldA items. For example: Many cities have a "Main Street". I right-click and drill-down on New York's street names. Then I click on data for Main Street to jump. The destination dashboard will show data for every Main Street in every city, instead of just New York's. --- Can you make JTD respect such a drill-down? --- PS: I also made a request about making Drill create dashboard filters. That would partly solve this request, but not fully: Sometimes, I don't want Drill to create dashboard filters, but I will still want the Drill to be respected by JTD. ... View more

Opening a dashboard which leads to a temporary error will redirect the user away from the dashboard URL to a 'dedicated' error page, e.g. 'https://xxxxxxx.sisense.com/app/main/error?status=404'. If this is a temporary error and the user refreshes this page they will never return to their intended destination - they are stuck on the error page forever. This causes confusion for our clients. Is there a way to change the way errors work so that I'm not redirected to a 'dedicated' error page and instead I can refresh the page and see my intended dashboard once the error is resolved? ... View more

I've been trailing the Report Manager add-on and was disappointed to see that the 'Event Based' option for triggering reports did not allow for Pulse Alerts to be used as an Event. It seems the current workaround is to use a tool like Zapier (so the pulse goes out to Zapier via webhook, which then creates the Event and goes back into Sisense, causing the report to be sent. This seems convoluted and I would have thought being able to directly integrate Pulses to trigger Reports seems like a natural fit. ... View more

Many of our clients have found it confusing that the formula editor will sometimes render AGG( [Data Field] ) and sometimes render [Agg Data Field]. They are the same, and people eventually learn that they are the same thing. Still, we field more support tickets than I'd like in which we find formulas that contain things like AGG( [Agg Data Field] ). For example, SUM ( [Total Quantity] ). ... View more

Hello, Currently the number of queries running in parallel during an EC build is set at the server level. With setting "Build / Base Table Max Threads" (4 by default). The optimised number of simultaneous queries is very much dependant on the context of the EC. For instance, an EC with 4 differents date source is more likely to accept a high number of simultaneous queries (spread over the 4 data sources), than an EC with only one data source. Therefore, I would like to suggest to make this setting per cube instead of at the server level. An alternative would be to have this setting at the Data Group level. Thank you and best regards, Franck   ... View more

When you export a datamodel to a .smodel file, the file includes connection information (server name, password, etc.). I would like an option to exclude that information when I click export. The export dialog already offers check boxes for Data Security, Scope Configuration, etc.; this feature could be just another one that says "Connection Information". Ideally, I'd like it to exclude the connection information by default, so users are forced to explicitly ask to include it, which will remind them to consider the file as sensitive. But I understand if you don't want to change default behaviour that other users are used to. When you import a model that has had this information removed, the import should let you to enter new connection information, or leave it as placeholders like Server=0.0.0.0 and password=Password so you can enter the information after importing. Sisense GIT already removes this information; this feature could work in a similar way. You could even deliberately make GIT's "non-tracked entities" all appear on the list of export options. GIT per this page: https://docs.sisense.com/main/SisenseLinux/asset-translation-and-management.htm?tocpath=Git%20Integration%7C_____3#Non-trac ... View more

Hi, I have gone through your connection update process for live models. But As I discussed with sisense team, they don't have any single API for updating connection. As per current scenario we need to follow multiple steps like below:- 1. Get table by: GET /datamodels/datamodelId/schema/datasets/datasetId/tables/tableId. response => tableResult 2. Override table by PATCH /datamodels/datamodelId/schema/datasets/datasetId/tables/tableId} where body = tableResult from the step 1. Only after performing the above steps, you can use PATCH/datamodels?/datamodelId?/schema?/datasets?/datasetId to update the schema for this dataset. So I just want to proposed one idea here that we can use multiple option here like below:- 1. We can provide any Key Vault connectivity for each model where we can store our connection details and we can use them for our model connections. 2. We also can provide a single API where our connection can we updated for all relevant objects & model it self. ... View more

When a widget returns no data and is displayed in column format - it would be nice to have an option to show the column headers only to give users a reference point as to what data will be shown. Thanks ... View more

We've been asked by customers for the ability to view more results than the current max of 10 ("showing first 10 results") when hovering over a data point in a scatter map. ... View more

Currently when scheduling builds to run in intervals, you can choose for the builds to run once every X days, OR X hours, OR X minutes. https://docs.sisense.com/main/SisenseLinux/scheduling-builds.htm. It would be beneficial to: 1. Use Hours AND minutes so we can prevent builds scheduled for every one hour from colliding with another build on hourly (even if multiple hours) interval i.e. schedule one for every 1 hour, and one for every 4 hours and on the 4th hour they collide and prevent successful full build. 2. Allow specific scheduled time and multiple intervals i.e. start @ 7AM and repeat every hour for 6 hours, or start at x hr and repeat every x minutes.   ... View more