In the left-hand sidebar where the list of Dashboards is shown, it would be nice if there was a visual indicator of whether a Dashboard that you own is being shared with anyone else. Currently, the only way to determine this is to click the kebab icon (⋮) next to the dashboard name and see if it says "Republish" (indicating the dashboard is currently being shared) or "Share" (indicating the dashboard is not currently being shared with anyone). However, if you are the owner of MANY dashboards, some of which are shared and some of which are not, then it can be very tedious to check this one-by-one. If you hover over a dashboard in the list, a pop-up will display with additional information, one of which is a "Last Published" date/time. However, this doesn't really help. First, it only appears on mouseover, so it doesn't solve the problem of this information being tedious to check/verify (since you still have to check each dashboard one-by-one). Second, the "Last Published" displays if the dashboard has EVER been shared, even if it's not currently being shared with anybody. For example, if I shared a dashboard with Bob, but then later removed him from the share list, then the dashboard is only visible to me and no one else, but the pop-up will still show the last time I published it to Bob (even though he can't see it anymore). There's also a visual indicator, to the left of the dashboards, in the form of an icon that changes depending on the status of the dashboard in question. Unfortunately, this icon only shows the ownership status of the dashboard, not it's share status. That is: it helps you identify at-a-glance (A) which dashboards in a list are ones you own, vs (B) dashboards that someone else owns and has shared with you. However, for the dashboards that fall into (A), there's no indicator as to whether you've shared it or if they are only visible to you.  Perhaps a different icon could be used to indicate each state. Another nice-to-have: for dashboards that fall into (B), i.e. dashboards that someone else owns and has shared with you, perhaps there could be different icons depending on the way it was shared with you. That is: whether the person shared it with you specifically vs shared it with a group that you're part of. Essentially, the icon should indicate all the possible states that a dashboard can be in: Dashboards you own that are not shared with anybody (i.e. only you can see it) Dashboards you own that have been shared with others Dashboards you do NOT own that have been shared with you Dashboards shared with you specifically Dashboards shared with a group you're in ... View more

the display format of the cube build time is shown as "Nov 8, 2023 2:00:01 AM" We should have option to format it to "11/08/2023 02:00 ' i.e. MM/dd/yyyy HH:mm:ss' ... View more

We would like the ability to modify attribute names and shared formula names without breaking dashboards or requiring partner plugins.   ... View more

We create a basic set of pre-built dashboards that we publish, where business users can view but not modify.  We also have two-tiers of analytics offering for business users (standard and premium).  On our common, pre-built dashboards, which are available to both standard and premium, we would like the ability to expose Simply Ask to only those users of premium (hiding it from those who are standard).   While this may be achievable via a 2-model, 2-dashbaord set approach, we desire to manage a single set of dashbaords and model to simplify deployment overhead and maintenance. ... View more

we have "label" field that have multiple values per entity and would like to be able to use the same field for both column and row in the pivot table. We will use different filter on column vs row so different values will be shown ... View more

  Background and customer pain points Currently Sisense is capable of showing numeric figures in abbreviated format, but only in the American/European short scale form: thousand (k), million (M), billion (B), trillion (T). In east Asian countries, there is a different scale form, so viewing information in these k/M/B/T is very difficult to understand.  Non-abbreviated Standard abbreviation (US/Europe) Indian abbreviation East Asian abbreviation 1,000 1 k (thousand) 1,000 1 千 10,000 10 k 10,000 1 万 100,000 100 k 1 lakh 10 万 1,000,000 1 M (Million) 10 lakh 100 万 10,000,000 10 M 1 crore 1000 万 100,000,000 100 M 10 crore 1 億 1,000,000,000 1 B (Billion) 1 arab 10 億 10,000,000,000 10 B 10 arab 100 億 100,000,000,000 100 B 1 kharab 1000 億 1,000,000,000,000 1 T (Trillion) 10 kharab 1 兆 Business case description/value To be able to select the scale form for number abbreviations for different APAC regions as well. Use case A user in Europe is creating a dashboard in Insights with an indicator to show total profit in an Indicator form. Let's suppose that the total profit to display is 1,610,000. 2. Europe user formats the content to abbreviate the display in the short scale form. User will see "1.61 M". 3. A user in Japan is creating the exact same dashboard on the same data. 4. Japan user formats the content to abbreviate the display in Asian scale form. User will see "161 万". 5. A user in India is creating the exact same dashboard on the same data. 6. India user formats the content to abbreviate the display in the India scale form. User will see "16.1 Lakh".   ... View more

It would be better to have more control options over exactly when the email report for a dashboard is triggered out to users. Currently we use the option "Every Elasticube update. No more than 1 emails per day" but that has issues: 1) We would only like the email to send if the Elasticube update is successful, rather than every update (including build failures). Otherwise we send a report out with missing data. 2) The rule of "No more than 1 emails per day" doesn't seem to be working properly. Meaning if we refresh the Elasticube more than once per day, users are receiving duplicate reports. ... View more

Selecting a value in a row selects only the value and not the row. This prevents passing a specific value unless the unique value is exposed in the table and selected by the user. Right clicking on a value in a row should provide the option to select the specific value that was clicked on, or the specific Row that the value is in. For instance: A pivot table of people with lots of names and dates. If a user finds the person they want to drill into they can drill into the name, but there might be duplicate names, so the drill through will have all the people with the same name. If they select the birthdate of the record it will drill into that birthdate, not specific person with that birthdate. A third unique value has to displayed for each result, like a userID. This value has no meaning for the end user, other than they have to click on the userID and only the userID if they want to drill into that user. There should be a way to select the row, not just a specific value. ... View more

Currently Notebooks provide a powerful opportunity to access and visualize data utilizing SQL and to add these to fusion dashboards.  Fusion's primary analytics environment allows for powerful dashboard-wide filters.   Currently dashboard filters do not apply to charts or tables which are created through notebooks even if the notebook is pointed to the exact same data table and column as other dashboard widgets.   Please develop the ability for dashboard filters to filter both fusion dashboard widgets and also notebook-based widgets.   ... View more

working with the plugin ExtenedPivotOnPDF shows the header of the Pivot only on the first page, doesn’t show starting form the second page. Please add header of table on all the pages. ... View more

We would like explanations to work with Formulas.  This have a few use cases that this benefit. Ideally a user can select a formula and generate a list of explanations with the data fields for the anomalies of the formula. ... View more

We have a few dashboards where the displayed data is only valid when a SINGLE ITEM is selected for a filter. We want to have the standard dashboard filters that our users are used to, but we want to prevent them from selecting more than one item at a time.  In the attached image, we want the red highlighted areas to be disabled (not selectable) for non-owners/non-editors of the dashboard.  We should be able to publish the dashboard with a default value for the filter and allow them to select a different value, but not multiple values.  ... View more

We have tried increasing the row limit for CSV download of live models to 250K rows but Report Manager is still limiting output to 5,000 rows which is the query setting of live models. We would appreciate a specific setting for Report Manager that determines the number of rows or have RM use the row limit defined for the report type (in this case CSV and 250K rows). Changing the query limit for the model does impact the report manager, but this impacts all users and every UI interaction, so the data retrieval volume explodes. There should be an independent setting related to report generation. ... View more

Sisense charts show tooltips when you move the mouse above them. When showing those tooltips the website automatically formats numbers in the tooltip in order to simplify the reading and shrinks those numbers if they go above 10k. Most of the times this is what I want as a user, but not always. According to my observations, tooltips stop showing the real number and show a simplification when it goes above 10,000  (e.g instead of showing 16742 it will show 16.7k). This idea would be to allow this number to be displayed in full instead of the shrinked version. Sometimes it is just useful to see the real value and not the simplified one. As a user, I'd like to see the real one sometimes. There are two possible ways of implementing this that come to mind, in the Tooltip section when editing a graph: Add a checkbox, clickable, with the current behaviour by default "[ ] Show raw numbers". This would be below "[ ] Show Total in tooltip" Add a threshold numeric input so that users could manually specify from which number onwards the formatting would shrink (e.g 10,000 by default).  "Shrink numbers above: [            10000]" First option is simpler to understand, second one is more flexible.  Right now, the workaround I'm using is to Edit a chart, then click on "Output" in order to see the real numbers as a table, but this is inconvenient. Here is an example of the number I'm referring to, in a chart. You see 15.9k and I'd like to see 15935.   ... View more

Use Case: As a user, I want to be able to share a dashboard with another user with the pre-selected filters so that they can see the same results as I do. Description: The current functionality of the dashboard filters is user-specific, meaning that each user has their own selected filters. However, there is a need to enable users to share a dashboard with another user, ensuring that the pre-selected filters are applied, allowing them to view the same results. This enhancement would allow a user to easily share a dashboard, including their filter selections, with another user. When the recipient accesses the shared dashboard, they would see the same filter settings as the original user, providing a consistent and synchronized view of the data. By enabling the ability to share dashboards with pre-selected filters, users can streamline collaboration, discussions, and decision-making processes. This feature enhances the dashboard-sharing experience and ensures that all parties involved are viewing the same data and insights. ... View more

With the "Jump to Dashboard" add-on installed & the "suppress _drill_" dashboard parameter configured, SiSense hides the _drill_ dashboards from everyone except the owner (which includes the sisenseadmin account).   As a result, it is hard for the administrator to view and/or manage _drill_ dashboards that are owned by a designer.   There is a workaround via F12 that SiSense showed me, but it's not intuitive.   It would be nice if there was a parameter to allow the sisenseadmin to always have the ability to see/edit the _drill_ dashboards (or perhaps that should be the default behavior). ... View more

Currently, when you share a dashboard you can have it email the dashboard out to people following a couple different schedules: Every Elasticube update (with a limit on times per day) Daily (can specify which days and a time) Monthly (can specify which months and what day of the month) The trick is that elasticube updates includes failed updates.  I would like to add an option to exclude failed builds from triggering these dashboard update deliveries. Now that we have alerting for build failures, there doesn't seem to be a reason for dashboards to deliver without new information. ... View more

While using the calendar date range in a filter, you should be able to type in the to and from date.  The old style filters allowed that option.  We recently switched to the "new" style (I say "new" because they are only new to us ... I think they have been available in the product for a long time).  In the new style you have to use your mouse to pick the date on a calendar, you can't type it in.   ... View more

We create filters on certain records that have long names, sometimes with similar names.  The current width of the filter panel cuts off these record names and makes it difficult to find the correct record(s) to select. We suggest either making the filter panel size-able, or possibly at least wrapping the name. ... View more