Currently, the ArcGIS Map Integration allows only one data point to be displayed as a tooltip. It is crucial for us to have the ability to show multiple data points in the tooltip. Adding support for multiple data points in the Detail field and previewing them as tooltips would significantly enhance the functionality.   Thank you.  ... View more

Currently, when we select the option to highlight in a widget data is, nevertheless, usually sliced in other widgets using different categories. Imagine we have three bar charts and a table, all of which are marked as HIGHLIGHT. Each widget and table contains a different category, this is the relevant part. I would like to be able to select a category in one of the widgets and be able to see all elements in the other widgets, but just highlighted. Currently, since these are different categories than the one selected, they are sliced. In attached image, I am selecting a category in the second widget but all the other widgets display sliced data, despite having selected highlight.   ... View more

Jump To Dashboard add-in It lists dashboards with the _drill_ prefix. It lists only dashboards using the same datasource. I have a drill-down dashboard that uses two datasources: one that matches my parent dashboard, and one that shows more granular information. I'd like this drill-down dashboard to appear on the JTD list. I think the JTD list should show any dashboards that share at least one datasource with the parent. ... View more

When we send more than one Combined Excel Report while using a dashboard having different filters on it. Names of those combined Excel sheet we get from them is same as they were using same dashboard for creating a report, which is difficult to identify when downloaded simultaneously. Can we base the name of excel sheet on Report Name itself rather than dashboard name as it will be more convenient. Thanks, Animesh Gupta ... View more

Create a pivot widget of RSUM( [Total Quantity] ) over time (rows) and break by (columns) age range. Scanning down each column, over rows, the numbers only increase. Now change it to a line widget. The break by defaults from an RSUM within columns in the pivot to an RSUM within rows in the line chart. This is the same as not having an RSUM and doing a stacked area. Our clients expect the line chart the results from changing the pivot to a line chart, to reflect the same output as the source pivot. As it stands now, they are surprised to see negative curvature in their RSUM, think something is broken, and open a support ticket. The default behavior should be to render Break by Columns instead of Rows. As an aside, I'm having trouble coming up with, and would be interested in hearing, use cases for charts with break by set to rows.  ... View more

The content/formatting/text contained in the various Sisense-generated/automated emails is currently static. I went through a long dialog with support and determined that  it's not customizable by customers. I would like it if we could modify these emails, and I'd especially like to have access to dynamic variables that we can insert in the email body (or subject). User's first name or last name were specific for my use case, but having access to a variety of variable could be helpful. ... View more

"Analyse SQL" helped me understand some widget measure formulas and filters. I wanted to then experiment with it in Sisense's "SQL Runner", but that didn't work: the query is too large, and it uses strange names for tables and columns (aFactXwAaSaleXwAaorders for the table Fact_Sale_orders, and aCountryCode for the CountryCode column). It'd be helpful if you modified SQL Runner and/or Analyse SQL so that I can paste results, edit, and run them. The purpose to help me investigate questions such as "How does this filter affect my measure?" or "What does my colleague's horribly convoluted measure formula mean, why is it wrong, and how might I fix it?" or "Is my widget doing unexpected joins?". I'd like this as a tool for myself and to recommend to colleagues. ... View more

Hi Sisense Team, When the same widget is used in multiple reports, could it be possible that when updates are done to the widget in one report, these updates are automatically done in all other reports that contain the same widget? Thank you! ... View more

Hi - Is it possible or planned to allow Sisense Narratives to connect to a different LLM provider? We are hosted in AWS and have restrictions around data transmission, so would need to use an internally available provider such as Bedrock instead of Arria for NLG. ... View more

I want an option to remove the "Can Design" role when sharing dashboards (yaml? admin settings? does it already exist?). I dislike the role because: Users don't realise that they're editing a temporary copy, and that the owner can Republish to overwrite. They might make many changes, and then months later someone republishes the owner/master version. I'm not entirely sure if republish always overwrites - if the user has made changes, do they keep their version when you republish or get the new one? If they keep theirs, it makes it confusing when trying to make changes requested by a user, because you make a change, click republish, and then the user forgets to click the revert-to-master-button. Instead of the Designer Role, users can just duplicate the dashboard. That way, no risk of overwrite or confusion.   ... View more

Currently, when exporting CSVs, numerical values are wrapped in quotes. For example, if I had   Customer_1, "204.56" Customer_2, "34.89" the values "204.56" and "34.89" are wrapped in quotes even though they're numeric values. Please allow for exporting of CSVs without double-quotes. ... View more

We get requests to add full charts to a Pulse.  The option doesn't currently exist in the dropdown. ... View more

When Highcharts is installed there is no option to choose what kind of scroll bar to use for a Widget. It would be nice if the designer could choose the Highcharts zoom bar or the regular scroll bar per Widget or Dashboard ... View more

Please add the ability to control widget zoom level via the Highcharts Navigator legend with the mouse wheel on Bar Chart type widgets via an option that can be enabled optionally. This would be similar to how map zoom can be controlled via the mouse wheel. ... View more

We propose adding a valuable feature to our dashboard UI: the ability to export a comprehensive list of all data models, including both Elasticubes and live models. This enhancement is essential for efficiently monitoring model changes before and after Sisense upgrades. Presently, this process involves manual actions like taking screenshots or exporting a text file using 'si' commands, but it lacks the capability to export live models and essential metadata such as data model type, owner, last modification date, last publication date, activity, and size. By introducing export functionality in formats like CSV, users will be equipped to easily track and compare models, quickly identifying any discrepancies or replacements. This improvement will significantly streamline model management and ensure seamless transitions during upgrades. ... View more

There are three features for BigQuery connections that would make your Edit Chart interface great. Show descriptions on the tables and fields: BigQuery supports adding a description to the fields and tables themselves. This information is often useful, and I find myself going to check the documentation on BigQuery consola in Google Cloud itself. We make use of this feature. Other databases also allow defining comments on tables and/or fields. It would be great to show them on the intervace via a tooltip when you put your mice over the field (right now is showing the type only) Display amount of data to be processed: one of the characteristics of BigQuery is that you pay by the amount of bytes you process. Building queries that are "efficient" is tricky task. Having a visual clue on the cost of the query allows me to understand better, before adding something in a dashboard or even running the query, how much data is going to consume. Also, if you tie that to the fact that I usually want to run the query using filters, and that there is no way for me to change filters in the editor, it makes my life miserable, because I need to copy the query, go to Google console, replace the generic filters [name=value] by real SQL filters, make a sense of the cost in SQL, etc... miserable experience. Show partitioned tables differently: For example, on Google Cloud BigQuery editor, partitioned tables are shown with a different icon than normal tables. Knowing if a table is partitioned, and knowing also which fields are the ones partitioned, would help to build efficient queries without leaving Sisense. Right now I find myself jumping in and out sisense. This takes time, and you are already showing all fields and tables in there, it would be great to just use a different icon for partitioned tables. That would be already helpful. Displaying the amount of data processed, to keep costs slim, would likely be the top thing (and Google does have API / command line in order to get the amount of bytes to be processed by a query). ... View more

we want larger area to edit and view widget description ... View more

The Sunburst chart is a great way to view multilayered data and obtain high level values and percentages from the source. Surprisingly, this visualisation does not support Jump to Dashboard (JTD) functionality which I would like to request. The ability to drill into the data is vital and provides users with an understanding of what sits beneath the chart should they require the detail.  ... View more