Hi, Working on a dashboard containing 3 pivot tables. Each have a lot of columns. (see print screen attached). In order to have a proper PDF, I need to turn the page format to A0 / landscape When exporting to PDF at the Dashboard level (from the pdf button top right), I access to a PDF setup, where I can choose the layout (landscape) and the paper format (A0), so that all the columns appears properly. In this screen, there is a Save button so that the PDF setup is saved for next time (see print screen) When exporting to pdf at a widget level, the same setup otions are available (landscape and A0), BUT THERE IS NO SAVE BUTTON. I have to redo this setup each time (see print screen). Could we have the the Save button on the widget / PDF option page, same as we have ar the dashboard / pdf option page please ? Thank you ... View more

The helm chart supplied with Sisense allows global annotation of all service accounts within the sisense namespace. For example I can annotate an AWS role that is able to be assumed by pods: helm upgrade sisense ${sisense_chart} --namespace sisense \ --reuse-values \ --set global.serviceAccountAnnotations."eks\.amazonaws\.com/role-arn"=${pod_role_arn} While this covers most of the pods by updating all the sisense-* service accounts in kubernetes the ec-build pod (the one that actually builds the elasticube) only uses the default service account in the sisense namespace. A workaround is to annotate the default service account: kubectl annotate serviceaccount default eks.amazonaws.com/role-arn=${pod_role_arn} --namespace sisense But it seems odd that the pod would a) assume the default service account when all other pods have service accounts explicitly defined for them and b) despite having gone to the trouble of wiring up global service account annotations in helm for them not to be applied at the final step of elasticube building. This specific use case is for supplying web identity tokens to a JDBC driver so that you can interact with AWS by using a specific OIDC assumed pod role, rather than using an EC2 role or worse, static credentials in a file or connection string. Even more specifically using CData JDBC parquet driver with S3.   ... View more

Similar to widow-orphan control of Paragraph page breaks in MS Word... it would be nice to have this in pivot tables too. That is, let's say the existing rows/subtotals in a pivot table take up 20 out of the "rows per page" value of 25.  If the next sub-section to display is going to take 3 rows, great, show that section.  But if the next sub-section is going to show 10 items, it means the subsection/subtotal will be split across two pages.  This is hard to remembe/digest/use when interacting with the dashboard.  With widow-orphan control, it would do a page break "early" before showing that next subsection of 10 items. ... View more

We disabled the new Simply Ask option in the Sisense configuration but it's still showing as a disabled option when you click a dashboard's context menu. We submitted this as a defect but were told that it's "by design". It's by design to show an option that's been disabled? We don't want users to request the option be turned on, as the hover text suggests. ... View more

Would you consider allowing the retrieval of files from the nodes with the file management so that end-users can retrieve logs with having ssh access. ... View more

we have "label" field that have multiple values per entity and would like to be able to use the same field for both column and row in the pivot table. We will use different filter on column vs row so different values will be shown ... View more

To recreate: Go into any dashboard Click PDF at the top The pop-up screen looks like this The circled Paper Size A4 is the issue. ... View more

Hi, We are having several issues when dealing with Elasticube Builds. We can now schedule the build (both UI and REST API), but we have no tool to monitor and control this key functionality. What's the history of the builds for a cube? When can we see the whole picture of the time each build for each cube happens to optimize resources and find concurrent builds in time? Now we can just see the last build log, as an isolated entity. We cannot monitor all the builds as a whole, to see the whole picture of all the builds (when it happened, how many time it got, etc.). As administrators, we have no way to control now this. Even we cannot check the history of builds for a cube. It's a critical feature for administrators.  Best ... View more

Hi Team,  In Support Portal we can have a lot of tickets raised and some of them are in Sisense side and some on our side.  Will it be possible to retrieve the info if a ticket is waiting from us or from Sisense directly in a list view ?  Thanks  Bastien   ... View more

Hello, In a multitenancy environment, it would be useful to be able to define an email notifications sender per tenant. ie : Tenant "Tenant A" : mail sender is "Sisense - A" Tenant "Tenant B" : mail sender is "Sisense - B" For now, email setup is only available from the default tenant, therefore unique accros all tenants. Thank you. Franck ... View more

We have a few dashboards where the displayed data is only valid when a SINGLE ITEM is selected for a filter. We want to have the standard dashboard filters that our users are used to, but we want to prevent them from selecting more than one item at a time.  In the attached image, we want the red highlighted areas to be disabled (not selectable) for non-owners/non-editors of the dashboard.  We should be able to publish the dashboard with a default value for the filter and allow them to select a different value, but not multiple values.  ... View more

We have tried increasing the row limit for CSV download of live models to 250K rows but Report Manager is still limiting output to 5,000 rows which is the query setting of live models. We would appreciate a specific setting for Report Manager that determines the number of rows or have RM use the row limit defined for the report type (in this case CSV and 250K rows). Changing the query limit for the model does impact the report manager, but this impacts all users and every UI interaction, so the data retrieval volume explodes. There should be an independent setting related to report generation. ... View more

Summary: Live Model slow, can be fixed by prioritising a filter I use a Live Model to return info about a few records from a big dataset. One filter should efficiently narrow the big dataset down. But the server sometimes applies other filters or joins first, making it unusably slow. I want an option to tell the Live Model to fetch the important filter's items first, and then write those items into the filtering clause when writing the main query. That will cause the server to correctly discover that applying the important filter first is the most efficient query plan.   Details (I'm querying SQL Server, but I suspect other sources would also benefit.) Sisense documentation says "Analytical Engine inserts filtering clauses into the innermost SQL statement. This means that filtering is the first operation performed". Sometimes that helps performance. But it depends on the source server. If you apply multiple filters or joins, the server may decide to perform a less efficient one first, or it may parallelise. In my case, my query went from a few seconds to over an hour depending on the server's choice.  The problem is that the server can't estimate the cardinality of the "filtering clauses" entered by Sisense. For example: The server doesn't know that my "dimCustomer.[Customer Name] = 'Joe Bloggs'" filter returns only 100 rows from my fact table, whereas "dimDateTime.FiscalYear = 2022" returns 100,000,000 rows from the fact table. There is a solution. Instead of "Where Fact.[Customer ID] In (Select [Customer ID] From dimCustomer Where [Customer Name] = 'Joe Bloggs')", Sisense should first run the query Select [Customer ID]... query to find that Joe's ID is 5. Then put the result into the filtering clause, i.e. "Where Fact.[Customer ID] IN (5)". For a hardcoded ID like that, the server can estimate the cardinality, so it sees that filtering on [Customer ID] first will be more efficient that other query plans. Sisense mustn't just do that for all filters. If it tries prefetching "dimDateTime.FiscalYear = 2022", that'll return all 31,536,000 seconds, and then pass that back in the query as "Where Fact.DateTimeID IN (...)".  Solution: The solution I request is: Allow the Live Model developer to set a "Prefetch Filter Items" flag on a field. If it is set, when a widget or dashboard filters that field, then Sisense first creates a query "Select dimSomething.[Relationship column] From dimSomething.FieldWithPrioritisedFilter". Then, when building the main query, change the "filtering clauses" to be "Where Fact.[Relationship column] IN (<put prefetched values here>)". Reference: For reference: https://docs.sisense.com/main/SisenseLinux/analytical-engine-overview.htm: Analytical Engine inserts filtering clauses into the innermost SQL statement. This means that filtering is the first operation performed, minimizing the number of rows that need to be scanned in order to process the query. Complex filters, such as top ranking and filter on measure are significantly improved as a result. Proof of concept: Build a Live Model. FactA joins to DimB on ID_B and to DimC on ID_C. The source is SQL Server. In SQL Server, all three tables have millions of rows, and the FactA has foreign keys to DimB and DimC. DimB.Name has a unique name for each row. DimC.Type is 1 for half the rows, and 0 for half the rows. Create a widget that filters for DimB.Name=<some name> and DimC.Type=1. Use SQL Profiler to find the query your Live Model runs. Run the query; it should take over a minute or time out. Then change the "Where FactA.ID_B IN (Select ID_B From DimB Where DimB.Name IN ('<some name>'))" to instead be "Where FactA.ID_B IN (<copy paste the ID of <some name> here>)". It should run much quicker. The original query might run quickly without change, depending on server settings; if so, mess about with more complicated joins or ask me. In my setting key queries were reliably slow. ... View more

Sisense charts show tooltips when you move the mouse above them. When showing those tooltips the website automatically formats numbers in the tooltip in order to simplify the reading and shrinks those numbers if they go above 10k. Most of the times this is what I want as a user, but not always. According to my observations, tooltips stop showing the real number and show a simplification when it goes above 10,000  (e.g instead of showing 16742 it will show 16.7k). This idea would be to allow this number to be displayed in full instead of the shrinked version. Sometimes it is just useful to see the real value and not the simplified one. As a user, I'd like to see the real one sometimes. There are two possible ways of implementing this that come to mind, in the Tooltip section when editing a graph: Add a checkbox, clickable, with the current behaviour by default "[ ] Show raw numbers". This would be below "[ ] Show Total in tooltip" Add a threshold numeric input so that users could manually specify from which number onwards the formatting would shrink (e.g 10,000 by default).  "Shrink numbers above: [            10000]" First option is simpler to understand, second one is more flexible.  Right now, the workaround I'm using is to Edit a chart, then click on "Output" in order to see the real numbers as a table, but this is inconvenient. Here is an example of the number I'm referring to, in a chart. You see 15.9k and I'd like to see 15935.   ... View more

It would be very helpful to be able to pass User or Group parameters as Claims in a Web Access Token. This will allow customers to leverage the dynamic features related to User/Group Parameters (e.g. dynamic live query) when using Web Access Tokens. ... View more

When connecting a notebook to an Elasticube, there is no indication what subset of SQL is expected to work Simple features like setting Cell 1 = select * from some_table Cell 2 = select * from Cell1 give errors suggesting the WITH syntax is not permitted, which is a bit of an issue given how heavily notebooks rely on it. There also seems to be limitations using ORDER/LIMIT in subqueries (which is fairly essential if CTEs arent allowed) Any real use of Notebooks on Elasticubes seems quite far away without finishing this feature ... View more

Use Case: As a user, I want to be able to share a dashboard with another user with the pre-selected filters so that they can see the same results as I do. Description: The current functionality of the dashboard filters is user-specific, meaning that each user has their own selected filters. However, there is a need to enable users to share a dashboard with another user, ensuring that the pre-selected filters are applied, allowing them to view the same results. This enhancement would allow a user to easily share a dashboard, including their filter selections, with another user. When the recipient accesses the shared dashboard, they would see the same filter settings as the original user, providing a consistent and synchronized view of the data. By enabling the ability to share dashboards with pre-selected filters, users can streamline collaboration, discussions, and decision-making processes. This feature enhances the dashboard-sharing experience and ensures that all parties involved are viewing the same data and insights. ... View more

We would like to configure multiple data security rules on a live data source table. With the available APIs there is a constraint to set one rule at a time. Having an API that accepts a collection of multiple rules is desired for our use case since we have more that 18,000 rules to be set. ... View more

I use pulse alerts to alert my clients when there is data on Sisense that needs their attention. The Pulse alert emails are accompanied by a big yellow 'Open Pulse' button. This button is the obvious thing to click on, but unhelpfully, it leads to the 'Pulses' tab of Sisense, not the actual dashboard. As a viewer, I want to jump straight to the dashboard, not be confused but this 'Pulses' tab which I most likely will not have seen before nor used. An option to have the button instead open the dashboard directly would be much better and make it much easier to engage customers with the Sisense platform.   I know there is a link to the dashboard on the pulse itself, but going via this screen this is inconvenient at best and confusing at worst. ... View more