Because a non-trivial amount of the population is colorblind, it's a best practice to never rely solely on color when indicating behavior or status of a UI element. The filter-pane buttons are by default, I think, green for positive selection, red for exclusion, and grey for unselected. It would be better if there was also a small icon in the button that would indicate checkmark if positive, "X" if negative, and blank if unselected. Or perhaps, if Unselected (red), show a thin "X" over the whole body of the button. Thank you. ... View more

We are a multi-tenant software provider and we embed and white label Sisense.  In our setup, we have 2 models.  Model 1 is used by Engineering to create our pre-built dashboards, where we share these with specific groups we've set up so that all of our customers see our pre-built "out of the box" dashboards The second model is what we expose to our Premium users so that they can create their own custom dashboards.   There are times when our customers will create a new, custom dashboard with the second model.  These users sometimes share their dashboard very broadly.  When this happens, there are certain users that wish to remove themselves from the share.  Perhaps they don't have row-level security to see anything.  Perhaps they have changed roles or simply do not use that dashboard. Note that we do not want to allow customers to remove themselves from our pre-built shared dashboards, as this could cause support confusion as to why our analytics solution is enabled but a user doesn't see "all of the dashboards".   With the above noted, we would like a configurable means to show/hide a "leave shared dashboard" dashboard option, based on the model with which a dashboard is associated.  This will ensure that users cannot remove themselves from our pre-built dashboards (we would hide on our model) yet allow them to remove themselves from custom dashboards that were shared with them (we would show on model 2 for self-authoring) When a user leaves a shared dashboard, there should also be configuration options to alert the owner of the dashboard via email.  This email should be capable of white labeling.  It should include dashboard name, who left, and when.  Should there be links to the dashboard in the email, there must be a way to disable hyperlinks in the email. ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

Hello There, We need to create a data model with 2 different data sources . One databricks live and another one is an excel file with some additional data . We need to create a combined model so that we can join these two tables and get the result. Currently sisense does not support it and other providers like Power BI and Zoho supports this feature. This is a common use case for our scenario  ... View more

We support multiple applications of data within a model, as there is crossover between the applications; however, our customers have granularity to choose which application data with which they are allowed to see when they create new dashboards. We use column level security for attributes today so that Application A author can only see table of data pertaining to application A while Application B author can only see tables of data pertaining to application B (note that a user can have both author rights and see all both application data). We found that this does not pertain to Shared Formulas.  This now increases the "noise" that authors see, as they are seeing formulas for an application that isn't something they can readily use. ... View more

The list of our shared formulas can grow to be quite long.  We would like the ability to search within formulas, just as you can for attributes. ... View more

When building dashboards, a common frustration is the lack of ability to multi-select widgets and perform mass actions, such as moving a group of widgets all-together at the same time, or deleting multiple widgets at once. Currently, to do either of those actions, you must do it one-at-a-time on each widget individually. This is tedious and time-consuming if you have many widgets you need to move or delete. It would be nice if there was some way to select multiple widgets at once and perform some kind of mass action on them, like click-and-drag to reposition, or to select "delete" and delete all selected widgets at once. I'm not sure what the best way to do this would be. Perhaps a toggle at the top of the dashboard that allows you to click a checkbox next to each widget. Similar functionality already exists for the main dashboard list, on the left-hand sidebar...a toggle at the top will cause checkboxes to display next to each dashboard (or dashboard folder). Checking any of the boxes will cause additional options to display at the bottom of the sidebar, allowing you to export or delete the selected dashboards. Alternatively, if there were a way to "group" widgets into a container of some sort, then you could perform an action on that container which would apply to all widgets within it. For example, if you had a container, and then three widgets inside, you could select the container and move it, which would move the widgets as well, or you could select "delete" which would delete the container and everything inside it. ... View more

In the left-hand sidebar where the list of Dashboards is shown, it would be nice if there was a visual indicator of whether a Dashboard that you own is being shared with anyone else. Currently, the only way to determine this is to click the kebab icon (⋮) next to the dashboard name and see if it says "Republish" (indicating the dashboard is currently being shared) or "Share" (indicating the dashboard is not currently being shared with anyone). However, if you are the owner of MANY dashboards, some of which are shared and some of which are not, then it can be very tedious to check this one-by-one. If you hover over a dashboard in the list, a pop-up will display with additional information, one of which is a "Last Published" date/time. However, this doesn't really help. First, it only appears on mouseover, so it doesn't solve the problem of this information being tedious to check/verify (since you still have to check each dashboard one-by-one). Second, the "Last Published" displays if the dashboard has EVER been shared, even if it's not currently being shared with anybody. For example, if I shared a dashboard with Bob, but then later removed him from the share list, then the dashboard is only visible to me and no one else, but the pop-up will still show the last time I published it to Bob (even though he can't see it anymore). There's also a visual indicator, to the left of the dashboards, in the form of an icon that changes depending on the status of the dashboard in question. Unfortunately, this icon only shows the ownership status of the dashboard, not it's share status. That is: it helps you identify at-a-glance (A) which dashboards in a list are ones you own, vs (B) dashboards that someone else owns and has shared with you. However, for the dashboards that fall into (A), there's no indicator as to whether you've shared it or if they are only visible to you.  Perhaps a different icon could be used to indicate each state. Another nice-to-have: for dashboards that fall into (B), i.e. dashboards that someone else owns and has shared with you, perhaps there could be different icons depending on the way it was shared with you. That is: whether the person shared it with you specifically vs shared it with a group that you're part of. Essentially, the icon should indicate all the possible states that a dashboard can be in: Dashboards you own that are not shared with anybody (i.e. only you can see it) Dashboards you own that have been shared with others Dashboards you do NOT own that have been shared with you Dashboards shared with you specifically Dashboards shared with a group you're in ... View more

We want to rotate the API key for our system user but need to make sure there's no downtime.  This means we need to have 2 keys working in parallel for the same user for a period of time until we can cycle all of our services to pick up the latest api key. The problem is as soon as the API key is rotated, the old key immediately stopped working.   Majority of systems out there support key rotation (like allowing a time delay before the old key expires like FB app, or ability to temporary create a second key and then we can promote it as primary once we are ready).   Key rotation is a best practice for security principles. ... View more

When adding a dependent filter, the only [available] lock option is a group lock. It is more useful having the ability to lock the primary filter but allow for dependent filtering. For example, if I lock an audit title, I want to retain the ability to filter specific question(s) within the audit. If both are locked as a group, I have to ensure end users know how to filter through the widget, which can be difficult if the full text of the question does not display or the user is not proficient. ... View more

Currently the Analytics screen displays available dashboards in a "list" view or a "tile" view.  The "tile" view includes columns "Name", "Owner", "Data Sources", "Last Published", "Last Modified", "Total Viewers", "No. of Widgets".   This is a request to add a new column "Source Folder".  This would be helpful for users with a large quantity of dashboards as they could sort by the "Source Folder".  In the future, the list view functionality could be expanded to allow grouping by this column which would further consolidate the view. Thank you! ... View more

the display format of the cube build time is shown as "Nov 8, 2023 2:00:01 AM" We should have option to format it to "11/08/2023 02:00 ' i.e. MM/dd/yyyy HH:mm:ss' ... View more

We have created many folders (and subfolders) to help us organize our dashboards. It is currently very cumbersome to share folder access and ownership, which must be done for every dashboard within the folders. It would be nice if there were an easy (and native) way to share access to a folder and every dashboard within it, or to change ownership of a folder. ... View more

We would like the ability to export table widget data to Excel.  While CSV is supported, we have had customer complaints because they format in the CSV file and forget to save as Excel, losing the work they've done.  We prefer this is a Sisense feature over use of a plugin as plugins require additional operational overhead to maintain and upgrade. ... View more

We create a basic set of pre-built dashboards that we publish, where business users can view but not modify.  We also have two-tiers of analytics offering for business users (standard and premium).  On our common, pre-built dashboards, which are available to both standard and premium, we would like the ability to expose Simply Ask to only those users of premium (hiding it from those who are standard).   While this may be achievable via a 2-model, 2-dashbaord set approach, we desire to manage a single set of dashbaords and model to simplify deployment overhead and maintenance. ... View more

We need a view that shows us which dashboards are dependent on which table in the datamodel. We want to remove some tables, but because we have many dashboards we don't know where exactly that table data is being used so it's very risky to change/delete tables. The depedency granularity of the data model is good but not enough. ... View more

Hi, We are facing some issues in the hour timezone related to builds. There's no way to change the UTC setting for the build schedule. It's very confusing and it's generating many issues in timezones when there are changes in the hour due to summer/winter time adjustments. We tried to change the timezone in the upgrade process, but the build schedule only works in UTC. This is a nightmare for data administrators. We need to be able to set the local timezone as the build schedule setting.  Best ... View more

Hello we would be pleased to see possibility to upload custom error pages in Sisense. 403, 404, 500. Also when you will end on not existing page e.g. /app/de. It would be perfect if such pages could also be translatable. It could be set as Look and Feel option or wherever you like.  ... View more

When a user makes an edit to a report, they can click Publish Changes so that report with those edits are live for users to see. Our customers would like to have an undo button so that the edits made in the last push is reverted and the version prior to publishing changes is now the current version. ... View more