NOTE: This is based on a post I made in the "Help & How To" forum. It was recommended to me to make a post here, in the Product Feedback forum, about it. There should be a way for Sisense to display the currently-selected filter values directly on the dashboard. I know that users can see this by expanding the right-hand sidebar to see the Dashboard Filters, and it's also a display option when you export to PDF. However, these aren't always obvious or available to the intended audience for the dashboard. For example, if I have a dashboard that's setup with a dashboard-level filter for "Work Group", it would be nice if I could display - directly on the dashboard itself - what work group is currently being filtered down to. Also, some of the values can be unclear, especially for date filters that use colloquial language such as "This Year" or "Last Quarter". There should be some way of displaying the exact date ranges that are being filtered for. For example, if today is November 13th 2024, then the "Last Quarter" filter value would mean dates from July 1st 2024 through September 30th 2024. But after the new year, if I were to check the dashboard again on January 6th 2025, then the date range would instead be from October 1st 2024 through December 31st 2024. Currently, in both cases, it'll just still how as "Last Quarter" and it's up to the user to figure out what that means (which can be difficult if they're looking at a static printout from some unknown time in the past). Other time periods can also be ambiguous or prone to misunderstanding. For instance, it's common to see people assume "Last Week" means a rolling time period covering the last 7 days, rather than the prior calendar week. Or assuming "Last 2 months" means the same as "this and last month", rather than the prior two calendar months not including the current month.  ... View more

Currently, the Area Map widget only offers two map types: World and USA. This becomes problematic if your data is limited to a specific country (Indonesia, in my case), and you only want to display that country on the map. I've managed to filter for Indonesia using the following code: ...res.geoJson.features.filter(feature => feature.properties.name === 'Indonesia'), However, this approach leads to another issue: when the dashboard loads, the Indonesian area is too small, and I have to manually zoom in. I would greatly appreciate any code or method to set the widget to automatically zoom into the Indonesian region when displayed on the dashboard. ... View more

Using the jumpToDashboard plugin, there is a feature enabled with flag "hideSharedDashboardsForNonOwner" that allow the owner of a dashboard to hide dashboards even if shared with other users. The owner is the only one who can see it. The problem of this option is that, when a dashboard is configured to be hidden, the only way the owner has to know this setting is to open the dashboard menu and check the flag status. As a result, it could happen that the owner doesn't have a clear overview of which of his dashboards are visible and which one are hidden to other users. It could be useful to show somehow to the owner, in the tile and list view, if a dashboard is hidden. One simple option is to set a value of opacity for hidden dashboard like "0.65" to distinguish them easily. Attached my implementation of this feature. It's based on 1.3.1 version of jumpToDashboard and adds this feature; it also fixes some issue I found with proxy base url set on the system (win and linux). There is a know bug in this feature (already in the base plugin version); the viewer see the real count of dashboards but then see just the dashboard that are not hidden (e.g.: 5 dashboards counted, but 3 tiles displayed). Here an example of 2 dashboards listed, one hidden and one not: 2024-10-02 - Updated attached version to fix dashboard counter when some dashboard is hidden ... View more

Idea: Allow developers to build/test add-ons in a local environment rather than requiring a live environment. Note that this would be for the purpose of creating custom add-ons for additional functionality that would require testing on the "out of the box" Sisense UI. Background/Context: In most development workflows it is common practice to work on your code locally on your machine and deploy to a local server aka "localhost" to test/view your work in the browser. An example of this is building and deploying a local React.js app to your browser. As you make changes to the code it will recompile locally and update what you see on your localhost. If you're using Sisense out of the box however, to test/view any changes to an add-on developers are forced to upload the files in some way to a live Sisense Environment. This not only limits the innovation of add-ons to developers with an active license and live environment, it makes it painfully inefficient to develop customizations on top of the Sisense application. I understand there are likely some business concerns with allowing the use of the product locally but I'd argue that there are ways to prevent that, such as enforcing some default sample data etc., but in such a way that would give developers a "local playground" to develop/innovate on. ... View more

When we send more than one Combined Excel Report while using a dashboard having different filters on it. Names of those combined Excel sheet we get from them is same as they were using same dashboard for creating a report, which is difficult to identify when downloaded simultaneously. Can we base the name of excel sheet on Report Name itself rather than dashboard name as it will be more convenient. Thanks, Animesh Gupta ... View more

Hello, I would like to suggest adding custom number of characters for the search bar on left panel when search is performed. For example, search will start after typing 3 letters. It would also be great if that search would be asynchronous instead of stopping everything.  Currently search is run after 1 character and with a big number of dashboards freezes whole application, sometimes causing browser to show alert that page is unresponsive. ... View more

Currently you only provide a direct link to a dashboard.  Allow the ability to have the ID of the dashboard. That way customers embedding the dashboard into their main app can load it natively into their app instead of directing the user directly to the Sisense instance. ... View more

The in app Look and Feel UI theme editor is an improvement to the CSS editing of the past, but it has removed some capabilities that were possible in the past. Items that should be added to the theme editor Primary Button Outline color Cancel Button Outline color Primary button hover state text color Cancel button hover state text color ... View more

Hello Everyone! There are a lot of Ideas around improving the ability to format the text in Widgets. We appreciate all the feedback! In order to make it easer for people to find and contribute to the discussion, I am combining them into this thread. Everyone, what are the customizations that you would like to see in the GUI rather than using a script? One of the ways we prioritize development efforts is by community interest. I encourage everyone to vote and comment on this suggestion and its comments. The more engagement a request receives, the higher the likelihood of it being considered for implementation. Thank you for participating, and we are excited to work with you to make a better Sisense! Have a great day! ... View more

When a widget returns no data and is displayed in column format - it would be nice to have an option to show the column headers only to give users a reference point as to what data will be shown. Thanks ... View more

Various features in Sisense can be whitelabelled. However, as well as the website, email notifications are another area of Sisense that customers will interact with. Email text configuration can be controlled via the 'email-templates.js' file, but there is not currently a way to whitelabel this text. I would like the option to change this text a deliver different messages for tenants. This would be useful for things like platform invitations in particular, to reassure users that an invitation from a 'Sisense' platform they may be unfamiliar with, is in fact associated with their company. ... View more

Sisense has some powerful whitelabelling features, but a key 'weak point' here is the URL itself. Currently, any Tenant has to be after the URL, e.g. for a company 'newcompany' at our company (Shepper), the URL would be shepper.sisense.com/newcompany. If we are delivering a whitelabelled solution for 'newcompany', where they want to whitelabel with newcompany assets only, there is no way to whitelabel the URL itself. I would like to keep the 'Shepper' text for most of our customers, but having an option to have an alternative URL for a tenant, such as newcompany.sisense.com (or even something that obscures our company's name a little, like shp.sisense.com/newcompany), would be the last piece of this whitelabelling puzzle. ... View more

We use the SSO JWT option for Single Sign-on. In Single sign-on configuration, we specify the Remote Logout URL. We want a way to specify this remote logout URL at the user group level. ... View more

Because a non-trivial amount of the population is colorblind, it's a best practice to never rely solely on color when indicating behavior or status of a UI element. The filter-pane buttons are by default, I think, green for positive selection, red for exclusion, and grey for unselected. It would be better if there was also a small icon in the button that would indicate checkmark if positive, "X" if negative, and blank if unselected. Or perhaps, if Unselected (red), show a thin "X" over the whole body of the button. Thank you. ... View more

We disabled the new Simply Ask option in the Sisense configuration but it's still showing as a disabled option when you click a dashboard's context menu. We submitted this as a defect but were told that it's "by design". It's by design to show an option that's been disabled? We don't want users to request the option be turned on, as the hover text suggests. ... View more

As of L2023.3, in Sisense’s Helm Charts , “Tolerations” are supported by the micro-services. It prevents end-users from configuring “Taints” on the node that they want to dedicate to Sisense. Since no “Taints” are configured, so all nodes can become eligible to host Sisenses’s pods. They experienced that scenario when pods from some other application services were scheduled on a Sisense node. Would you please consider allowing the pods to be protected not only with  “Toleration” but also with “Taints”. The justification for this is that, even though it is mentioned in prerequisites documents that Sisense should be installed on dedicated servers, there is a non-negligible factor from the customers perspective that is the overhead administrative costs, especially for customers who must already manage numerous clusters for several applications, multiple environments, and redundancy.   ... View more

Some end-users have several environments where they must provision Sisense and they strive to standardize and automate the processes as much as possible for efficiency. It would be great to be able to extend standardization and potential automation of configuration to the Helm Chart level: Please include some ways to enable feature or disable feature with the helm chart so that if we want to enable file management everywhere we could provide a value to all our helm charts so we can have uniform configuration. ... View more

Hello we would be pleased to see possibility to upload custom error pages in Sisense. 403, 404, 500. Also when you will end on not existing page e.g. /app/de. It would be perfect if such pages could also be translatable. It could be set as Look and Feel option or wherever you like.  ... View more

To recreate: Go into any dashboard Click PDF at the top The pop-up screen looks like this The circled Paper Size A4 is the issue. ... View more