This is for LiveConnect data sources using Snowflake. We cannot filter Datetime columns at the hours level. Either "last n" hours or "between 08:00-12:00" as example. I would like to see this added as a capability of filters. ... View more

When building dashboards, a common frustration is the lack of ability to multi-select widgets and perform mass actions, such as moving a group of widgets all-together at the same time, or deleting multiple widgets at once. Currently, to do either of those actions, you must do it one-at-a-time on each widget individually. This is tedious and time-consuming if you have many widgets you need to move or delete. It would be nice if there was some way to select multiple widgets at once and perform some kind of mass action on them, like click-and-drag to reposition, or to select "delete" and delete all selected widgets at once. I'm not sure what the best way to do this would be. Perhaps a toggle at the top of the dashboard that allows you to click a checkbox next to each widget. Similar functionality already exists for the main dashboard list, on the left-hand sidebar...a toggle at the top will cause checkboxes to display next to each dashboard (or dashboard folder). Checking any of the boxes will cause additional options to display at the bottom of the sidebar, allowing you to export or delete the selected dashboards. Alternatively, if there were a way to "group" widgets into a container of some sort, then you could perform an action on that container which would apply to all widgets within it. For example, if you had a container, and then three widgets inside, you could select the container and move it, which would move the widgets as well, or you could select "delete" which would delete the container and everything inside it. ... View more

On the Analytics page, there is a menu on the left where dashboards are listed. It is possible to create folders to organize dashboards. Folders can be nested within other folders. Currently, It is not possible to drag and drop one folder into another. This would be useful to have. ... View more

For users who wish to receive their Dashboard contents using the Subscription service, Sisense supports embedded emails or PDF format only. For convenience and expedience, I would like to see support for users to receive compatible Dashboards (e.g. Pivot Tables) directly as an Excel attachment. This will help for users who wish to receive regular emails containing important data in Excel format for integration with other systems.  ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** Designers cannot save formulas for shared use. This is problematic in two scenarios: 1. End users (our customers’ customers) are Designers 2. Data models are shared across multiple tenants (with row level security) Without this the customer is forced to either manage hundreds of separate data models, which is not sustainable, or to remove all ability to save formulas, which is not acceptable for users. The “Shared Formulas” feature should allow for permissioning; something similar to “limit sharing to users’ own groups” would work. ... View more

While it is possible to Lock a filter so that users can't change it, sometimes they get confused by the presence of that filter and want to try to change it, which results in a support call to us.  There could also be times when the filter criteria itself is sensitive. We should be able to right-click on a filter and choose "Hide from Viewers". This would also have the benefit of cleaning up the user interface a bit, so viewers don't have to wade through criteria that they can't control anyway. ... View more

Hello, I would like to suggest adding custom number of characters for the search bar on left panel when search is performed. For example, search will start after typing 3 letters. It would also be great if that search would be asynchronous instead of stopping everything.  Currently search is run after 1 character and with a big number of dashboards freezes whole application, sometimes causing browser to show alert that page is unresponsive. ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

1. View all history of builds and its corresponding logs from the cubes. Because, I could not see the last build failure reason, if another build got started. I need to wait for another build to complete or fail. 2. View all history of changes and provide a way to revert as in Google docs for both the cubes and dashboards. Some times, if something went wrong, we should just be able to revert to the previous version and continue from there. 3. Provide a way to view the list of cubes in the queue waiting for the build. Also, allow remove or disable them for a period or rearrange the queue to build. This will help in prioritizing something manual on demand. 4. If a cube build fails due to the memory or other configurations issue, provide suggestions like what has to be changed and based on what before triggering another build. 5. Provide a page to derive the suggested the configurations like memory, cpu, timeouts etc by collecting details like 1. Number of cubes, 2. average cube size, max cube size, min cube size, or number of cubes by size range say <5g, <10G, <20G, <40G etc.., 3. Frequency of the build per cube etc.. 6. Provide a page to view all the slow running dashboards, slow running queries and some suggestions to improve it. 7. Some times, if a dashboard got changed and republished, it is not getting applied to all the users. Provide a way to view the version of the dashboard the user may view. 8. Between builds, if there is not much change in the data, Sisense build should go faster. Provide a way like one common place to build each table from other sources individually and keep it ready. From there, if we build say functional cubes, it should build in flashing fast using the locally stored data. I see the cubes are pulling the data faster from relational db but very slow from mongodb. Now, if we are pulling data from another sisense cube or from the source no big performance difference. 9. Also, I am not sure, if we are restarting the nodes, should we necessarily mark the cubes in queue as failed, instead adding back to the queue as it was before the restart and just marking the actual cube got failed should be good enough. More later .. Thanks, Muthusamy J ... View more

Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

Allow widget designers to turn off the display of the Grand Totals calculation for certain columns in a pivot table. Situations exist for which it is highly beneficial to display the Grand Total of a select few columns in a pivot table, and not to show others as they can be misleading or distract from the primary purpose of the pivot table. I envision an implementation that enables the Grand Total to be toggled on/off for each column, with the default being 'on' for all columns. ... View more

When Pivot or Table widgets, the options for formatting a datetime column allow showing the date OR the time, with no option to show both together (e.g. if format was "dd/MM/yyyy HH:mm:ss" then we could get "23/10/2022 17:05:21").   ... View more

**Please note this idea was migrated to the Product Feedback Forum from older submission areas** The Data Designer, when modeling an Elasticube or Live model isn’t able to define the default aggregation method. When adding a measure to a widget, an aggregation method is automatically applied. The Dashboard Designer can choose the aggregation method via a menu, but a regular click will always choose a predetermined system-wide defauilt (distinct count or sum). In some cases, the aggregation applied is not relevant and could lead to invalid results. I would like to see a feature that allows a Data Designer, when designing the data model, to define the default aggregation for a column. A Data Designer has the knowledge of the data model and what aggregation is best used for it. This ability would assist Dashboard Designers in correctly using the model. ... View more

Idea: usage analytics reports can tell what reports use a certain field? Filter by a certain field in the usage analytics report and you will see all dashboards using that field.  It would also be beneficial to track table usage in dashboards too.  Use Case: region will be renamed to region_usa in our sql query and this could potentially break dashboards. to be proactive, i would like to know what dashboards are currently using the field 'region' so that I can redirect them to the correct field, 'region_usa' once the sisense schema & sql has been updated. ... View more

Instead of having to manually set the same format for each date type over and over, it would be nice if you could set defaults for each date type (Year, Quarter, Month, Week, Day) somewhere and have everything default to that with the ability to change away from the default if needed.  This could be done in the same area we set First Day of Week and Fiscal Year for the server. ... View more

In browsers, usually links can be right-clicked. You get a menu including "Open in new tab" and "Copy link". Some Sisense links block this behaviour: e.g. the list of dashboards and jump-to-dashboard links. It'd be nice to get it back. To be clear: I do not want every link to open in a new tab. That would be annoying. I just want the option to do so. For example, here's a link where the right-click does work:   ... View more

It's not possible to create a dashboard filter using formulas. I could create a dashboard filter only with variables that are present in a data source. I am able to create a value in pivot table and then use it as widget filter, but it can't be done to other widgets that are not pivots. ... View more

I'd like to have the easy option of making a customized table or pivot table with any data types in my data model. Below is the ideal table I can easily achieve in Tableau and PowerBI today, with string and number data types. Sisense cannot achieve this without adding in bespoke BloX or code snippet. My data looks like the below: Trying to achieve my ideal result in Sisense pivot table looks like below, which is not a good look. Sisense cannot visualize the string data type in a pivot table or a table with numbers in the way I hoped for. Other softwares have the option of dragging and dropping any data into an area in the dashboard which will solve this issue.  Here is my sisense community post where I asked for help on this issue: https://community.sisense.com/t5/technical-troubleshooting/how-to-pivot-this-data-table/m-p/23187#M175 ... View more

The v1 Excel exporter included functionality that would export Pivot Table widgets to an XLSX file that was aggregated just like what users see inside of Sisense in their browser. We are now using the v2 Excel exporter and it no longer has this functionality, apparently by design. I think the v2 Excel exporter should also have aggregation functionality so that the XLSX export for Pivot Tables is just like what users were seeing with the v1 exporter. We have thousands of users who have been using the v1 Exporter and are expecting this behavior. ... View more