Knowledge
Note: We are actively completing a knowledge migration process. This space will grow over the next few months as this work is completed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Knowledge Base Articles

How to Change the Pivot Header Row Style with TransformPivot

How to Change the Pivot Header Row Style with TransformPivot This solution is based on Pivot 2.0 API supported in Sisense version L8.2.1 or later (not supported in Sisense for Windows). For this solution, we shall use cellStyle from Pivot 2.0 API. Th...

TS_1-1680090546134.png TS_2-1680090855977.png
taras by Sisense Team Member
  • 294 Views
  • 0 comments
  • 0 kudos

Indicator Gauge as a Percentage

If you are using a gauge indicator in your dashboard and want to make the gauge reflect a percentage like shown below (elasticube is Sample Retail) - Follow the steps below - Steps:1. Create an indicator widget and add a value you want to review. In ...

intapiuser by Community Team Member
  • 271 Views
  • 0 comments
  • 0 kudos

Replace the homepage with an embedded dashboard

Introduction:By using the re-branding API you can replace the default homepage with a specific dashboard.(For further explanation of the branding functionality please read this article.)Keep in mind you need to leave only what you change ("string" is...

intapiuser by Community Team Member
  • 286 Views
  • 0 comments
  • 0 kudos

Changing the ‘Grand Total’ label on pivot table

*****Windows Only****When having a pivot table which contains more than one value and present the grand total for each of the values, the total row is called “Grand Total” In some cases you can face with users’ requirement for changing the ‘Grand Tot...

intapiuser by Community Team Member
  • 566 Views
  • 0 comments
  • 0 kudos

Maximize Dashboard Performance

What is good dashboard performance?Dashboard performance is the time it takes to load a Sisense dashboard. We want our users to have a good experience when working with our data. The time taken to load the dashboard is the first step. Each individual...

intapiuser by Community Team Member
  • 802 Views
  • 0 comments
  • 0 kudos

Create an AND Filter For Survey Data

Issue In Survey Data you might have 10th or even 100ds of parameters per questionnaire, Sisense suggest transposing all the parameter into one column (See article). Once you do that you might run into an issue filtering questionnaires that answered A...

intapiuser by Community Team Member
  • 71 Views
  • 0 comments
  • 0 kudos

Control Chart

Please note this article is useful for Windows users and users who use older Linux versions that pre-date the Analytical Engine. Control charts are a common way to show a trend line of some metric, as compared to an upper and lower boundary. This art...

intapiuser by Community Team Member
  • 320 Views
  • 0 comments
  • 0 kudos

Pivot2. How to set up styles with the scripts?

Currently, in Linux installation, you can face widget [Pivot2]. This is a new realization of the widget [Pivot]. This means that it has new styles, new classes, etc. Almost all the scripts to change styles of the resulting table used DOM selectors to...

intapiuser by Community Team Member
  • 744 Views
  • 1 comments
  • 1 kudos

Reorder pivot columns by viewers

Need A common requirement for self service BI is to enable the viewers to save their own report. This can be achievable in Sisense if you are a designer of a dashboard.However, when you are a viewer, you cannot even re-order the pivot columns as you ...

intapiuser by Community Team Member
  • 179 Views
  • 0 comments
  • 0 kudos

Dashboard Comparison

In Sisense, you can view two separate dashboards side by side and slice/dice the data differently for each of them. Of course you could open each dashboard in a new tab, but then you can't see them both at the same time. This post describes how to cr...

intapiuser by Community Team Member
  • 131 Views
  • 0 comments
  • 0 kudos

Leveraging Usage Analytics for maintaining a healthy environment

Analytical NeedIn this article, we can find a suggested approach on how to better maintain our Sisense environment. The current tools and methodologies take us to an encumbering and challenging work. By creating a dedicated dashboard to show our envi...

intapiuser by Community Team Member
  • 243 Views
  • 0 comments
  • 0 kudos

How To Create & Use Variables

Sometimes we'd like to define variables to hold specific metrics and use them throughout the dashboard in several places, with the ability to change / control them in one repository without the need to manually change each formula or widget.A good us...

intapiuser by Community Team Member
  • 413 Views
  • 0 comments
  • 0 kudos

Reset to Default Filters Button using BloX

This article will explain how to create reset to default filters button in BloXThis helps in case you want to provide this icon functionality on the dashboard and not just in the Filters panel. 1. Create a new custom action with the below code: *Make...

intapiuser by Community Team Member
  • 355 Views
  • 0 comments
  • 0 kudos
Labels
Community Toolbox

Recommended quick links to assist you in optimizing your community experience:

Developers Group:

Product Feedback Forum:

Need additional support?:

Submit a Support Request

The Legal Stuff

Have a question about the Sisense Community?

Email community@sisense.com