We are OEM with several hundred client organizations, each of whom have their own set of our standard data models. The data sources are prefixed with a client code so that the same data model can be distinguished and secured between clients. Have two sets of the same data models with different data.  Have two users, each with access to only one of the two sets of data models. One user creates a dashboard that uses multiple data sources. The dashboard is export to .dash file and shared to the other user who imports it. The second user then needs to update the dashboard data sources to see the dashboard render with their data. Importing that dashboard into Windows and updating the data sources: 2DSDashImportWindows.mp4 Just update the data sources at the dashboard level. Importing that dashboard into Linux and updating the data sources: 2DSDashImportLinux.mp4 Update one data source at the dashboard level. Then update each widget in the dashboard to use that data source. Then update the other data source at the dashboard level. Then update each widget in the dashboard to use that data source. How many widgets in your dashboards 😉 ... View more

While downloading a large csv/excel file (over several hundreds mb file) from the widget, there would be a long delay of couple minutes before the browser indicates the file has been downloaded. During this time, the user has no indication if the request to download is in process or has failed. It would be good to have an indicator to show the download of the file is in progress, so user would not click the download multiple times thus causing multiple queries to hit the backend.   ... View more

In addition to not being able type in dates with the Calendar item in the date filter (I submitted that as a separate idea to be able to type in dates), the general date selecting user experience is quite cumbersome.  It's hard to write this out and much easier to show.  But the short story is that it is difficult to select the dates on the first try.  A pretty typical interaction with the calendar component goes something like this: Open the filter Select Calendar Pick the start date Perform however many clicks it takes to get to the date you need (sometimes this can take a few clicks if you are going back a few years/months) At this point you think you have selected the start date Now, move your cursor to go select the end date At this point, the start date loses your initial selection.  I think this happens 90% of the time Sometimes the issue is that the start date gets set to the new end date Sometimes it resets before you even get to the start date Sometimes it goes back "Select" like you never picked a date This behavior is quite frustrating.  I have experienced it quite a bit myself and customers have complained.  I hope there is something that can be done to improve it. ... View more

When adding a new piece of data to a widget, instead of having to add one at a time, add a checkbox to each item to the left of each item in the list. The user can check the box for each item they want to add to the widget, instead of having to add one at a time. This will speed up adding many items to a widget. ... View more

It is currently possible to add a second axis, but we would like to expand this capability to have more axes on a chart or line chart with Compose SDK. Data visualizations are becoming more advanced and to match our competitors, we would like to have this capability to build a chart where users can select and display multiple measures on one chart. For our future dashboard, we plan to have a longer list of KPI measures that users can select from to ensure a customizable and interactive experience. ... View more

For the pods that sisense deploys into the kubernets cluster (bld and qry pods) being able to customize these specs would be helpful to get true node isolation and for log shipping. Currently we can set the Limits and Requests for these pods. It would be nice if there were a configuration setting that would allow us to add a toleration to the spec so our cluster can use taints. Also adding custom annotations to these pods would allow us to ship the logs to our log management system giving us greater insight and monitoring.  ... View more

Managing pulse alerts is a nightmare, and is in dire need of improvement: 1 It's impossible to identify who added you to an alert, and there's no way to unsubscribe, so you can't manage them from the recipient side. 2. Tenant or system admins can't see all pulse alerts configured, so they have no way to identify troublesome alerts. 3. The current supported APIs don't allow identification of other's alerts. The alerts API only returns the user's alerts, and the "recent" alerts API doesn't return the ID of the alerts so you can't just delete the troublesome ones.  There needs to be some attention spent on alerts, as they are currently a nuisance and not useful.   ... View more

As admin, I can get other people's dashboards using the /dashboards/admin endpoint. However, the information returned is limited: I can't get a .dash file or widget objects. I want to use my admin rights on the /dashboards/{id}/export/dash endpoint to download every dashboard, even ones that haven't been shared with me. Perhaps this could be generalised to other endpoints that limit based on dashboard permissions or other permissions: If as admin I can grant myself access to an object through the UI, then I should be able to set a flag in my API calls to circumvent these restrictions. ... View more

Idea: usage analytics reports can tell what reports use a certain field? Filter by a certain field in the usage analytics report and you will see all dashboards using that field.  It would also be beneficial to track table usage in dashboards too.  Use Case: region will be renamed to region_usa in our sql query and this could potentially break dashboards. to be proactive, i would like to know what dashboards are currently using the field 'region' so that I can redirect them to the correct field, 'region_usa' once the sisense schema & sql has been updated. ... View more

People sometimes build bad data models. Rather than them doing more training (or asking me to help), you could build a tool that points out common problems. The user would click a button, wait a minute or so, and then get a list of potential problems and suggested changes. The tool would describe an example using their data that they can use to prove the problem (e.g. "filter a widget by Location and Date and then you see it's double counting the Dollars field"); that would be more motivating than an abstract argument. Not only can they debug themselves, doing so will be better than training for teaching them to design better data models. Here are my ideas for issues to look for. They might not always indicate a problem, but you can point them out for the user to decide. Do they use a convention for distinguishing Fact and Dim tables? Typically "fact" and "dim" prefixes for table names. Does any widget use a dim-table field in an aggregation in a Values pane formulas? Does any widget use a fact-table field in a non-values pane, or as a members filter in a formula? Do any dim-tables join to a fact-table via another fact-table? Does any pair of tables have multiple relationship paths of the shortest length? (Should be only one short path and it shouldn't include a fact table, but there might be several longer ones via other fact tables.) Any many-to-many relationships? Sometimes this is intentional and the user is meant to select a single item from a dim-table, so maybe ignore it if all uses in widgets filter one side of the relationship. ... View more

Our users often ask about concatenating strings contained in two separate columns as a calculated column in pivot tables. Although this is possible at the data model layer, it is not possible at the dashboard layer. We do not expose data model design and administration to our end users. Would be very helpful for Sisense to introduce this functionality. ... View more

See pictures. Or go: 1. Open datamodel. 2. Click the Dashboards dropdown. 3. Click Open Dashboard. It lists dependent dashboards. But it includes only dashboards where this data model is the "primary" data source. That is dangerous. It made me think that "No dashboards are available for this model" and I nearly deleted the model. The list should show all dependent dashboards. I will use the API to check dependencies in future.         ... View more

It's great that in the formula editor one can add as much empty space as one likes to make the code as readable as possible... spaces, returns, blank lines, etc. Also great that fields in the formula editor can be renamed from what they are in the data browser to detail, for example, how a field is filtered. We can also hack that feature to add in a [Value]*0 as a comment. Still, revisiting big formulas is time consuming because of the lack of code comments. One can create an external repository that includes comments, but formulas cannot be copied and pasted from an external repository into the formula editor, making an external solution not much more helpful. So having a way of commenting in the formula editor, or a way to store formula code somewhere else that allows for commenting that also allows for easy update in Sisense when the code changes in the external repo.   ... View more

Recently, we were trying to create a widget using the RPAVG function for a rolling 30-day average, which broke our connection to the live model while working (to an extent) on an elasticube. The function worked past the first 30 days on the elasticube, while the first thirty days were (SUM N )/ N. This formula works past those thirty days, but for the first value, for example, gives simply the first value.  A new version of these functions would be greatly appreciated.  ... View more

While it is possible to Lock a filter so that users can't change it, sometimes they get confused by the presence of that filter and want to try to change it, which results in a support call to us.  There could also be times when the filter criteria itself is sensitive. We should be able to right-click on a filter and choose "Hide from Viewers". This would also have the benefit of cleaning up the user interface a bit, so viewers don't have to wade through criteria that they can't control anyway. ... View more

We have found that if an ACL in a WAT does not match the Elasticube table/column security field, it defaults to providing 'all data'. To avoid a potential human error where a table/column has been renamed, we would like the default position to be 'nothing'.  ... View more

It would be helpful to choose where on a dashboard to add a new widget rather than it only being added to the bottom of the dashboard. ... View more

As an admin, have an option at the top of a dashboard to be able to view it as another specific user.  For example, if user John Smith is set under the data security on a cube to only have access to rows for a certain region, the ability to view a dashboard as John Smith would make checking user access very easy. ... View more

1. View all history of builds and its corresponding logs from the cubes. Because, I could not see the last build failure reason, if another build got started. I need to wait for another build to complete or fail. 2. View all history of changes and provide a way to revert as in Google docs for both the cubes and dashboards. Some times, if something went wrong, we should just be able to revert to the previous version and continue from there. 3. Provide a way to view the list of cubes in the queue waiting for the build. Also, allow remove or disable them for a period or rearrange the queue to build. This will help in prioritizing something manual on demand. 4. If a cube build fails due to the memory or other configurations issue, provide suggestions like what has to be changed and based on what before triggering another build. 5. Provide a page to derive the suggested the configurations like memory, cpu, timeouts etc by collecting details like 1. Number of cubes, 2. average cube size, max cube size, min cube size, or number of cubes by size range say <5g, <10G, <20G, <40G etc.., 3. Frequency of the build per cube etc.. 6. Provide a page to view all the slow running dashboards, slow running queries and some suggestions to improve it. 7. Some times, if a dashboard got changed and republished, it is not getting applied to all the users. Provide a way to view the version of the dashboard the user may view. 8. Between builds, if there is not much change in the data, Sisense build should go faster. Provide a way like one common place to build each table from other sources individually and keep it ready. From there, if we build say functional cubes, it should build in flashing fast using the locally stored data. I see the cubes are pulling the data faster from relational db but very slow from mongodb. Now, if we are pulling data from another sisense cube or from the source no big performance difference. 9. Also, I am not sure, if we are restarting the nodes, should we necessarily mark the cubes in queue as failed, instead adding back to the queue as it was before the restart and just marking the actual cube got failed should be good enough. More later .. Thanks, Muthusamy J ... View more