Hi, Whenever an user with owner access is deleted, all the dasboard created by him are getting deleted. Also, those dashboards shared with others are also deleted. This looks like a critical issue, since the dashboard will be shared among other users, they won't be able to see any dashboard if the user gets deleted. Atleast the dashboard shared with other users should be retained.   Thank You, Deviprasad ... View more

Current behavior of the Simply Ask feature doesn't support automatic saving of the modified NLQ model to the "*.dash" file. So you loose your development work after exporting the dashboard with already enabled and tuned "Simply Ask" to a "*.dash" file. After importing this dashboard back to Sisense the feature is automatically disabled. Also if a developer will enable it manually it starts running based on the "By Default" NLQ model. This forces to redo all the work on the model back again which is time consuming and not efficient. We expect Sisense to consider in the future the development work on making this more convenient for a BI engineer. If a "Simply Ask" feature will be automatically enabled on an imported dashboard with a corrected model, it would be beneficial for dashboard deploy automation and will reduce unneeded additional manual work on setting up this feature again and again for different working environments for the same dashboard. ... View more

Because a non-trivial amount of the population is colorblind, it's a best practice to never rely solely on color when indicating behavior or status of a UI element. The filter-pane buttons are by default, I think, green for positive selection, red for exclusion, and grey for unselected. It would be better if there was also a small icon in the button that would indicate checkmark if positive, "X" if negative, and blank if unselected. Or perhaps, if Unselected (red), show a thin "X" over the whole body of the button. Thank you. ... View more

We are a multi-tenant software provider and we embed and white label Sisense.  In our setup, we have 2 models.  Model 1 is used by Engineering to create our pre-built dashboards, where we share these with specific groups we've set up so that all of our customers see our pre-built "out of the box" dashboards The second model is what we expose to our Premium users so that they can create their own custom dashboards.   There are times when our customers will create a new, custom dashboard with the second model.  These users sometimes share their dashboard very broadly.  When this happens, there are certain users that wish to remove themselves from the share.  Perhaps they don't have row-level security to see anything.  Perhaps they have changed roles or simply do not use that dashboard. Note that we do not want to allow customers to remove themselves from our pre-built shared dashboards, as this could cause support confusion as to why our analytics solution is enabled but a user doesn't see "all of the dashboards".   With the above noted, we would like a configurable means to show/hide a "leave shared dashboard" dashboard option, based on the model with which a dashboard is associated.  This will ensure that users cannot remove themselves from our pre-built dashboards (we would hide on our model) yet allow them to remove themselves from custom dashboards that were shared with them (we would show on model 2 for self-authoring) When a user leaves a shared dashboard, there should also be configuration options to alert the owner of the dashboard via email.  This email should be capable of white labeling.  It should include dashboard name, who left, and when.  Should there be links to the dashboard in the email, there must be a way to disable hyperlinks in the email. ... View more

We produce pre-built dashboards for our customers.  They can build their own as well.  Often, they will start with one of our pre-built dashboards and modify to their needs. Users want a way to "filter out" our pre-built once they have created their own.  One mechanism mentioned was the ability to "Favorite" a dashboard and have a new "Favorites" toggle on the Analytics tab. ... View more

The list of our shared formulas can grow to be quite long.  We would like the ability to search within formulas, just as you can for attributes. ... View more

When building dashboards, a common frustration is the lack of ability to multi-select widgets and perform mass actions, such as moving a group of widgets all-together at the same time, or deleting multiple widgets at once. Currently, to do either of those actions, you must do it one-at-a-time on each widget individually. This is tedious and time-consuming if you have many widgets you need to move or delete. It would be nice if there was some way to select multiple widgets at once and perform some kind of mass action on them, like click-and-drag to reposition, or to select "delete" and delete all selected widgets at once. I'm not sure what the best way to do this would be. Perhaps a toggle at the top of the dashboard that allows you to click a checkbox next to each widget. Similar functionality already exists for the main dashboard list, on the left-hand sidebar...a toggle at the top will cause checkboxes to display next to each dashboard (or dashboard folder). Checking any of the boxes will cause additional options to display at the bottom of the sidebar, allowing you to export or delete the selected dashboards. Alternatively, if there were a way to "group" widgets into a container of some sort, then you could perform an action on that container which would apply to all widgets within it. For example, if you had a container, and then three widgets inside, you could select the container and move it, which would move the widgets as well, or you could select "delete" which would delete the container and everything inside it. ... View more

In the left-hand sidebar where the list of Dashboards is shown, it would be nice if there was a visual indicator of whether a Dashboard that you own is being shared with anyone else. Currently, the only way to determine this is to click the kebab icon (⋮) next to the dashboard name and see if it says "Republish" (indicating the dashboard is currently being shared) or "Share" (indicating the dashboard is not currently being shared with anyone). However, if you are the owner of MANY dashboards, some of which are shared and some of which are not, then it can be very tedious to check this one-by-one. If you hover over a dashboard in the list, a pop-up will display with additional information, one of which is a "Last Published" date/time. However, this doesn't really help. First, it only appears on mouseover, so it doesn't solve the problem of this information being tedious to check/verify (since you still have to check each dashboard one-by-one). Second, the "Last Published" displays if the dashboard has EVER been shared, even if it's not currently being shared with anybody. For example, if I shared a dashboard with Bob, but then later removed him from the share list, then the dashboard is only visible to me and no one else, but the pop-up will still show the last time I published it to Bob (even though he can't see it anymore). There's also a visual indicator, to the left of the dashboards, in the form of an icon that changes depending on the status of the dashboard in question. Unfortunately, this icon only shows the ownership status of the dashboard, not it's share status. That is: it helps you identify at-a-glance (A) which dashboards in a list are ones you own, vs (B) dashboards that someone else owns and has shared with you. However, for the dashboards that fall into (A), there's no indicator as to whether you've shared it or if they are only visible to you.  Perhaps a different icon could be used to indicate each state. Another nice-to-have: for dashboards that fall into (B), i.e. dashboards that someone else owns and has shared with you, perhaps there could be different icons depending on the way it was shared with you. That is: whether the person shared it with you specifically vs shared it with a group that you're part of. Essentially, the icon should indicate all the possible states that a dashboard can be in: Dashboards you own that are not shared with anybody (i.e. only you can see it) Dashboards you own that have been shared with others Dashboards you do NOT own that have been shared with you Dashboards shared with you specifically Dashboards shared with a group you're in ... View more

When adding a dependent filter, the only [available] lock option is a group lock. It is more useful having the ability to lock the primary filter but allow for dependent filtering. For example, if I lock an audit title, I want to retain the ability to filter specific question(s) within the audit. If both are locked as a group, I have to ensure end users know how to filter through the widget, which can be difficult if the full text of the question does not display or the user is not proficient. ... View more

Currently the Analytics screen displays available dashboards in a "list" view or a "tile" view.  The "tile" view includes columns "Name", "Owner", "Data Sources", "Last Published", "Last Modified", "Total Viewers", "No. of Widgets".   This is a request to add a new column "Source Folder".  This would be helpful for users with a large quantity of dashboards as they could sort by the "Source Folder".  In the future, the list view functionality could be expanded to allow grouping by this column which would further consolidate the view. Thank you! ... View more

the display format of the cube build time is shown as "Nov 8, 2023 2:00:01 AM" We should have option to format it to "11/08/2023 02:00 ' i.e. MM/dd/yyyy HH:mm:ss' ... View more

We have created many folders (and subfolders) to help us organize our dashboards. It is currently very cumbersome to share folder access and ownership, which must be done for every dashboard within the folders. It would be nice if there were an easy (and native) way to share access to a folder and every dashboard within it, or to change ownership of a folder. ... View more

We would like the ability to export table widget data to Excel.  While CSV is supported, we have had customer complaints because they format in the CSV file and forget to save as Excel, losing the work they've done.  We prefer this is a Sisense feature over use of a plugin as plugins require additional operational overhead to maintain and upgrade. ... View more

We create a basic set of pre-built dashboards that we publish, where business users can view but not modify.  We also have two-tiers of analytics offering for business users (standard and premium).  On our common, pre-built dashboards, which are available to both standard and premium, we would like the ability to expose Simply Ask to only those users of premium (hiding it from those who are standard).   While this may be achievable via a 2-model, 2-dashbaord set approach, we desire to manage a single set of dashbaords and model to simplify deployment overhead and maintenance. ... View more

We need a view that shows us which dashboards are dependent on which table in the datamodel. We want to remove some tables, but because we have many dashboards we don't know where exactly that table data is being used so it's very risky to change/delete tables. The depedency granularity of the data model is good but not enough. ... View more

When a user makes an edit to a report, they can click Publish Changes so that report with those edits are live for users to see. Our customers would like to have an undo button so that the edits made in the last push is reverted and the version prior to publishing changes is now the current version. ... View more

  Background and customer pain points Currently Sisense is capable of showing numeric figures in abbreviated format, but only in the American/European short scale form: thousand (k), million (M), billion (B), trillion (T). In east Asian countries, there is a different scale form, so viewing information in these k/M/B/T is very difficult to understand.  Non-abbreviated Standard abbreviation (US/Europe) Indian abbreviation East Asian abbreviation 1,000 1 k (thousand) 1,000 1 千 10,000 10 k 10,000 1 万 100,000 100 k 1 lakh 10 万 1,000,000 1 M (Million) 10 lakh 100 万 10,000,000 10 M 1 crore 1000 万 100,000,000 100 M 10 crore 1 億 1,000,000,000 1 B (Billion) 1 arab 10 億 10,000,000,000 10 B 10 arab 100 億 100,000,000,000 100 B 1 kharab 1000 億 1,000,000,000,000 1 T (Trillion) 10 kharab 1 兆 Business case description/value To be able to select the scale form for number abbreviations for different APAC regions as well. Use case A user in Europe is creating a dashboard in Insights with an indicator to show total profit in an Indicator form. Let's suppose that the total profit to display is 1,610,000. 2. Europe user formats the content to abbreviate the display in the short scale form. User will see "1.61 M". 3. A user in Japan is creating the exact same dashboard on the same data. 4. Japan user formats the content to abbreviate the display in Asian scale form. User will see "161 万". 5. A user in India is creating the exact same dashboard on the same data. 6. India user formats the content to abbreviate the display in the India scale form. User will see "16.1 Lakh".   ... View more

It would be better to have more control options over exactly when the email report for a dashboard is triggered out to users. Currently we use the option "Every Elasticube update. No more than 1 emails per day" but that has issues: 1) We would only like the email to send if the Elasticube update is successful, rather than every update (including build failures). Otherwise we send a report out with missing data. 2) The rule of "No more than 1 emails per day" doesn't seem to be working properly. Meaning if we refresh the Elasticube more than once per day, users are receiving duplicate reports. ... View more

When Highcharts is installed there is no option to choose what kind of scroll bar to use for a Widget. It would be nice if the designer could choose the Highcharts zoom bar or the regular scroll bar per Widget or Dashboard ... View more